http://forums.vwvortex.com/ en Wed, 19 Jun 2013 06:30:03 GMT vBulletin 60 http://forums.vwvortex.com/images/vmg/misc/rss.png http://forums.vwvortex.com/ http://forums.vwvortex.com/showthread.php?6070185-CSI-series-32-restored-FS-Trade&goto=newpost Wed, 19 Jun 2013 04:49:45 GMT Hello, I am new to the vortex and I joined after hearing about it from a friend. I told him about my wheels I have up for sale or trade and he... Hello, I am new to the vortex and I joined after hearing about it from a friend. I told him about my wheels I have up for sale or trade and he pointed me here. I got them on a good deal and after doing some research it turned out that these wheels are considered to be pretty rare and on high demand.

Here is a link with the information on them and what they look like factory:
http://forums.bimmerforums.com/forum....php?t=1738076

Specs:
16x7+25 front
16x8+24 rear
5x114.3

GOOD: These wheels have been completely restored, lips have been polished and the faces have been powder coated white.

BAD: I did not get them with center caps but am told that a lot of the VW and BMW fans usually run without them since they are so hard to find.

im looking for something a little bit different than these wheels and preferably 17" to 18" maximum.
will consider trades, trades plus cash, or 1500 OBO All trades must be 5x100

seeing as I am doing this from my phone It will not allow me to post physical pictures up its asking for a URL of some sort so if you would like pictures pm me and I will be more than happy to send you some via text message. If that is ok. ]]> Other Bolt Patterns Classifieds MK4bullet http://forums.vwvortex.com/showthread.php?6070185-CSI-series-32-restored-FS-Trade http://forums.vwvortex.com/showthread.php?6070101-FS-Parting-a-set-of-3-piece-16-quot-MSW-Vegas&goto=newpost Wed, 19 Jun 2013 02:51:48 GMT I was going to build these up for myself but I can't find the barrel size I need and I just don't have the time right now. Here's what I have:

4x 5x114.3 faces, including waffles but no centre caps - they have been polished and look pretty nice but aren't perfect $400
4x 16X7.25" 30-hole barrels (useable with RS003s with minimal work) $600 or $350/pair
5x 16x1" lips - 2 are really nice, the other 3 all have either rash or bends. $200 for the two nice ones and $150 for the 3 not so nice ones. $300 for all 5.

I will take some pictures this weekend. Thanks for looking :beer: ]]> Other Bolt Patterns Classifieds Golfatron3 http://forums.vwvortex.com/showthread.php?6070101-FS-Parting-a-set-of-3-piece-16-quot-MSW-Vegas http://forums.vwvortex.com/showthread.php?6070065-FS-3pc-17-quot-Etoile-455s&goto=newpost Wed, 19 Jun 2013 02:04:00 GMT I have a set of 3pc Etoile 455 wheels for sale Specs: Size 17x8 PCD 5x120 / 5x120.65 / 5x4.75 Offset et25 (approximate measurement see... I have a set of 3pc Etoile 455 wheels for sale

Specs:
Size 17x8
PCD 5x120 / 5x120.65 / 5x4.75
Offset et25 (approximate measurement see pictures)
Made in France

Wheels should be refinished and trued since they have minor bends and some rash. One of the inners had a crack that has been welded by the previous owner, all hold air just fine. These are a great set of wheels and extremely rare to find in 3pc form (looks to have the original seal)

First person with 650 picked up in so cal or 750 shipped in the continental US gets them.

See the photobucket link below and let me know if you have any questions

Photobucket link:
http://s634.photobucket.com/user/ele...y/Etoile%20455

]]> Other Bolt Patterns Classifieds electricalbox http://forums.vwvortex.com/showthread.php?6070065-FS-3pc-17-quot-Etoile-455s http://forums.vwvortex.com/showthread.php?6070026-Feeler-17-BBS-RS&goto=newpost Wed, 19 Jun 2013 01:21:19 GMT Just throwing this out to see if i catch any interest. tossing around the idea of selling my bbs rs. 17x9 et 35 17x10 et35 (im not 100% on the... Just throwing this out to see if i catch any interest. tossing around the idea of selling my bbs rs.
17x9 et 35 17x10 et35 (im not 100% on the ets, they have been rebuilt but that is what is stamped on the face)
fronts have 1.5'' lip, the rears 2''. one rear has some rash but its not terrible. i can get better pictures for those interested.
faces are powdercoated.
located in royal oak, mi. 48067.
WILL NOT ship, dont ask. might drive up to 4hrs to meet for delivery but thats it!!
asking 3,000usd.



]]> Other Bolt Patterns Classifieds boradie sucht http://forums.vwvortex.com/showthread.php?6070026-Feeler-17-BBS-RS http://forums.vwvortex.com/showthread.php?6070016-17-quot-Compomotive-wheels-CX701&goto=newpost Wed, 19 Jun 2013 01:15:10 GMT For sale a set of staggered 3 pc. Compomotive CX 701 wheels. They are 17 x 6.25 and 7.25. They have 2" & 3" lips. They are 4x95.25 with flat backs, perfect for a redrill. They're practically new as they never saw the road but were mounted on a show car.

I can have them redrilled to 4x100 for the asking price if you need them redrilled to a different bolt pattern I'll just charge the difference on the cost of the redrill.

Asking for 1200 obo. I can ship on your dime.

These wheels are in really good shape, the barrels are polished as well and it comes with the cap removal tool.









. ]]> Other Bolt Patterns Classifieds Palladigma http://forums.vwvortex.com/showthread.php?6070016-17-quot-Compomotive-wheels-CX701 http://forums.vwvortex.com/showthread.php?6070010-FS-17x9-35-5x114.3-Volk-RE30-Cheap!!&goto=newpost Wed, 19 Jun 2013 01:06:18 GMT I have a set of Volk RE30 for sale, not looking for trade. They are 17x9, +35, 5x114.3 all four corners. Forged, made in Japan and one of the... I have a set of Volk RE30 for sale, not looking for trade. They are 17x9, +35, 5x114.3 all four corners. Forged, made in Japan and one of the lightest rims you can buy. Two of the wheels have a good bend on the backside of the rim. Also one of the wheel have curb rashes on the front of the rim. No other bends or crack that I know of. The set is being sold as is, there are no refund or exchange. These new are about $900 a piece that equal $3600+150 for the center caps. Volk valve stems are included, tires are not. $1500 shipped as is or 1900 professionally fixed and shipped. Offer will be considered no lowballing. PM or text me at 720401259seven. Serious buyer only, don't contact me if you don't have the cash.




















]]> Other Bolt Patterns Classifieds tle.88 http://forums.vwvortex.com/showthread.php?6070010-FS-17x9-35-5x114.3-Volk-RE30-Cheap!! http://forums.vwvortex.com/showthread.php?6069935-FS-FT-BBS-RK-II-Pearl-White-with-Polished-Lips-17x8-ET35-5x110-with-hardware-to-fit-5x108&goto=newpost Wed, 19 Jun 2013 00:01:39 GMT Bought these a while back, tried to sell before refinishing, but ultimately got them refinished and ran them for the spring, mainly for SoWo. I'm thinking it's already a time for change, looking to possibly trade or would sell outright.

Looking to trade for something 17x8+ or 18x8+, can be staggered, can need a re-finish (if not too beat up), looking for something unique and no replicas. Willing to consider the right OEM wheel from another brand vehicle. 5x108 or 5x110 would be cool, but I'm very open to adapters.

17x8
5x110
ET35
CB 65.1

Polished Lips
Pearl White Faces
Chrome BBS Center Caps
Original BBS Wheel Bolts in Factory Finish

Tires are Falken 512 205/45-17 with probably 8,000 miles on them. Still plenty of tread, a little bit of camber wear from the backs, but when I had these tires put on these wheels I had them flipped and moved to the front.

Will sell to Volvo guys (or anyone 5x108) with Wobble Nuts and 5x108-5x108 Adapter style spacers from Motorsports Tech, both hub and wheel centric to 65.1. 15mm front, 20mm rear.

Wheels Only - $1000 + Shipping
Wheels and Tires - $1250 + Shipping
Wheels and Tires and Adapters and Wobble Nuts - $1500 + Shipping

Wheels were professionally refinished by Sergeys House of Wheels this past spring and were put on a week before SoWo so they've only been driven on for a little over a month (and counting)

Sergeys House of Wheels
https://www.facebook.com/sergeyshouseofwheels?fref=ts

Wheels are Currently located in Cincinnati, OH 45213, but could be delivered to the following Cities and in between for extra depending on where. (willing to be very reasonable on travel expenses for delivery) Milwaukee, Chicago, Indianapolis, Columbus, Lexington, Louisville.

And onto the pictures...


RK 4 by JVC8790, on Flickr


Rk 5 by JVC8790, on Flickr


BBS RK-2 by JVC8790, on Flickr


BBS RK by JVC8790, on Flickr

I can get more pictures if interested.

Thanks for Looking
-John ]]> Other Bolt Patterns Classifieds JVC http://forums.vwvortex.com/showthread.php?6069935-FS-FT-BBS-RK-II-Pearl-White-with-Polished-Lips-17x8-ET35-5x110-with-hardware-to-fit-5x108 http://forums.vwvortex.com/showthread.php?6069549-FS-Staggered-Volk-SF-Challenge-wheels&goto=newpost Tue, 18 Jun 2013 16:00:53 GMT I have a staggered set of four Volk SF Challenge wheels made by Rays Engineering. Specs: PCD 5x114.3 Fronts: 19x8.5 et34 Rears: 19x9.5 et40 ... I have a staggered set of four Volk SF Challenge wheels made by Rays Engineering.

Specs: PCD 5x114.3

Fronts: 19x8.5 et34
Rears: 19x9.5 et40

They have no bends/cracks and are function perfectly. One of the wheels has had the lug holes ovaled by the previous owner but with use of hub rings has no affect at all on the wheels. You can have inserts pressed, fill and drill, etc if you are worried.

Cosmetically they are in decent shape, ok to run, but probably deserve a refinish for high caliber a wheel they really are. Some slight rash, scratches, etc. . . see pictures for a better illustration. Overall condition would be about a 7 out of 10 IMHO.

They have original valve stems and 3 original caps, the other can be bought from volk directly or used online.

These wheels can be purchased new for about 3,500 (little less then 1k a wheel). I am looking to get 1,000 picked up in so cal or 1,100 shipped including paypal fees.

Not in a rush to sell, I may actually try them on the mkv in a while to see if I like 19s.

Let me know if you have any questions and have a good day.

Photobucket link:

http://s634.photobucket.com/user/ele...SF%20Challenge

]]> Other Bolt Patterns Classifieds electricalbox http://forums.vwvortex.com/showthread.php?6069549-FS-Staggered-Volk-SF-Challenge-wheels http://forums.vwvortex.com/showthread.php?6069432-Land-Rover-HSE-Sport-Wheels-19x9-ET-53-5x120-Brand-New-235-35-tires-800-BRO&goto=newpost Tue, 18 Jun 2013 13:27:08 GMT Hola, After months of these floating between me and a friend and neither of us sure if we wanted to keep them. I have a set of HSE Sport wheels... Hola,

After months of these floating between me and a friend and neither of us sure if we wanted to keep them. I have a set of HSE Sport wheels for sale, with brand new 235/35 Falken 453 tires. They have less than 150 miles on them. I mounted them up for one night before I started having issues with the car, and now need to sell to pay for that.

Tires:
Falken FK453
235/35 19
http://www.discounttiredirect.com/di...w=false&cs=235

Wheel specs:
19x9
ET53
5x120
They are painted white like in the last two photos

Adapters Included if you can use them:
19mm Front
23mm Rear
5x108 to 5x120
Custom made by Adaptec

Wheels were on my 2012 Ford Focus last summer

There are no bends or cracks in the wheels one half inch section of rash on two wheels, other than that they just need to be cleaned up. Although, after storage and running them last year, I recommend a fresh coat of paint since the paint did not come out amazing last year. (Used single stage Automotive paint)

Tires alone are $160 each.

$800 BRO

Will get better pictures on how they sit now for anyone interested. Just don't have it right this second.

Located around the Manchester NH area. I know I don't have alot of post on here, dont let that scare you away. Its just cause I drive a Ford.




]]> Other Bolt Patterns Classifieds jholso http://forums.vwvortex.com/showthread.php?6069432-Land-Rover-HSE-Sport-Wheels-19x9-ET-53-5x120-Brand-New-235-35-tires-800-BRO