Okay this is just a quick reference for those out there wanting to do this. I will show you how to take it apart... First to separate the plastic...
I know the north american Jettas never had the two plastic rectangular grille plates that go behind the front bumper, but did the european spec jetta...
So my heater core went out and I need to run a bypass until the new one comes in. This is my first time dealing with this so I need some help...
I am trying to strip the outside of a caddy gas tank. The tank is covered in a yellow wax that I cannot remove. I have tried lacquer thinner,...
Found some rims I want, just wondering if ET40 will cause any issues, I only have rear 1/4 flares
Hey everyone, I suppose it's time to take the plunge and change my typical ":thumbup:" posts to "help!" posts. My name is Ben, and I'll be doing...
It is with great relish, that I'm pleased to formally introduce, what I often describe as, PA's ugliest, most reliable truck ever. I first discovered...
Hey all, been making numerous posts lately on my confusion with parts. Please bare with me: Basically have a torn apart caddy, and it came with 2...
Im doing TDI swap so i need a go pedal, and a way to operate the clutch. I wouldnt mind going with the cable clutch conversion, but i just cant...
Hi there! My name's Jomar (Darky) I'm from Puerto Rico and I'm making this build thread for my 1983 Volkswagen Caribe/Golf/Rabbit, I bought her on...
Ok, I picked this up for a song and it's got a blown head gasket and needs a new rad, no big deal. I'm learning as I go. It's an 83 Rabbit Diesel LS....
http://www.mijnalbum.nl/Foto-QBFJ3DPQ.jpg intercooler http://www.mijnalbum.nl/Foto-XSD3XCOF.jpg IC en Radiator...
NLA
http://sandiego.craigslist.org/nsd/cto/3684710768.html So ever since my beloved rabbit was totaled 3 months ago I've been looking for another one....
Alright so I have been restoring my rabbit for the past few years and have the body in pretty good condition, just installed a new top and now want...
Hi folks, I own since 3 days a '81 that has been "clippered" and "quaded". http://s24.postimg.org/yqhmzm1ad/photo2.jpg It is sitting at...
well i have a 84 mk1 rabbit. A good buddy gave it to me and i drove it for a year. I had to replace the tranny so i decided to to start a low budget...
Does anyone know why this IP's codes are on a plate? When I've seen 20 other pumps where the number are just in the metal housing with no plate? ...
Hey guys another question I couldn't find an answer. My car still has the plastic cover over the seat rails? How do I remove them to test fit my new...
Welcome to the A1 16V post. Below you will find helpful <I>links, websites, owners and diagrams</I> in bold. Please IM me if you currently own an A1...
Picked up a 1981 diesel 1.6l so I have couple of questions and thank you vortex ppls in advance 1. I want to do headers and exhaust on it will that...
I have a 1982 VW Caddy with 1.7L motor. Apparently after numerous volt meter test, it seems that the Hall Sensor is out of service. I need to...
ok well i might be buying a vw truck up in minnesota and well here is the deal i am staying up here for 3 weeks and the truck is in shell form can i...
Can I flip the rear beam in my '83 GTI? I searched and nothing seems to exist. It seems like it wouldn't result in any major issues, if any. I'm...
i remember an '83 scirocco wolfsburg with 5k miles on the odometer a couple years back...and now this, across the pond: ...
Please excuse me if I am overlooking something glaringly obvious, which I am sure I MUST be doing.... This seems as though it should be fairly...
So before I throw un-needed parts at my rabbit I have a few questions. My coolant temp guage reads 2 bars below red while driving. I did some...
What parts am I gonna need to go from the glue in to the bolt in vent windows. I found good glass and setup but the seals were pretty bad. I...
So, stock 84 gti. Starts fine everytime. Has never died on me. Symptoms: irradic idle. as in one day it idles at 1000rpm and the next at...
This car I've been after for what seems like 3-4 years. It all started on a local GTG thread here on the forums where an aircooled member posted up a...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules