So... super highway fuel economy is the goal and the .71 just isn't going to cut it for the Tdi swap I'm working on. Does anyone know where I can get...

Apparently the shift fork for first and second gear has broken in my transmission. I pulled the transmission from the car now idk of my best option...

I have a 02 awp 1.8t and when I took out the trans the slave cylinder was unbolted but it was still in trans/bell housing when I removed it the end...

I was driving today and had come to a stop went to put it into 1st and when i let the clutch out i got nothing....the car just stayed at idle. also...

Okay so i just rebuilt my motor and put it back in. Put the same trans back on with the same clutch. Everything seemed to go together fine. When the...

I have an 02j and i had a crazy vibration noticable when going straight and very strong when turning to the right but turning left no vibration at...

Ok trusty Mechs and techs out there here's my situation. I drive a MK3 Jetta 2.slow manual trans If I'm driving spiritedly 1st and 2nd gear shifts...

hey all i have a few rather simple questions about the mk 4 6 speed tranny. i have a buddy looking into buying a 04 jetta gli vr6 and the ad says it...

anyone knows where i can buy the driveshaft or the pressure spring, the spring seat and the tapered brass ring other then the dealer.?

I have a 02a transmission and it have a small leak, it is coming from the vw logo cap on the bottom of the transmission. Is that cap something that I...

Recently developed a chirping noise from what I believe is my release bearing, it sounds like your typical squeaky/chirping bearing, similar to the...

Hey, noob here, just got 04 getta gli 18.t. 6spd Pretty exited! But already having problems.. :banghead: So, the problem is, when it's in any...

Which GM Synchromesh do you use ? From what I recall there are two different types .. Am I correct/wrong And Anyone have instructions on how to...

hey guys can someone tell me the part number or give me a link to a place to buy the part im about to describe. stand at front of car. passenger...

2013 Golf R, 5800 miles. Installed a Clutchnet clutch with 14lb SMF, full face kevlar/organic disc, with new bolts and new throwout bearing/slave...

Have to fix my gearbox, can I take the gearbox from a Golf V6 4motion 2001 (DRP)? Will it fit?

Hy Gents, I have new tran-x plate diff for my 02j and after some calls to quaife, I stripped the o2j diff and fitted the bolt-in buttons from the...

So I got a MKIV Jetta 1.8T at a great price. the clutch and slave cyl was trashed (and it needed timing and tuneup) I get the tranny off and the...

Alright everyone, my 02M is pretty much done. I was just told it will be roughly $2000 to repair and that a brand new 02Q is available. The 02m is...

Hello! Well, been on a 100 mile drive today, everything went ok except for the last 10 miles.:rolleyes: I couldn't select gear anymore, like the...

I have a 1.8t engine (chipped) on a 2.0 5spd transmission. I've already broken both drive axles, and countless engine mounts. I found some...

So I have most of my turbo kit ready to be installed, and before I do I am changing transmissions from my stock auto to a manual (for obvious...

ok. so first i have been researching this alot, most info is on old hotrods and such, but i am trying to change the clutch pedal and master cylinder...

While changing the oil today in my MKV TSI 6 spd GTI I noticed a hole in the housing of my transmission. ...

does anyone know where i can get this hose? my master took a **** and i want to replace everything

well the problem started with third since i got the car. it wouldnt shift into third at higher rpm from second gear. it would feel like it went in...

Already have the shift box and cables, now I'm trying to hunt down a shift tower. It is my understanding that the shift tower will mate with a vr6...

SO I completely rebuild my 02j using EuroSpec Sport's complete 02j rebuild kit with "sport" gear set, my Wavetrac unit from before, new 4.23/1 R&P...

application '86 GTI<p>Are the fiber gaskets between CV and Drive Flange necessary? (90 mm's don't have them)<p>If necessary, where do you get...

I have an 02 1.8t 5 speed my clutch is on the way out. Whenever i put my car In reverse it grinds I'm thinking its the dogbone mount. What's your...