http://www.uspmotorsports.com/images/usp_logo_1.jpg USP Motorsports presents - R32 Steel Shift Fork Transmission Upgrade - 6 Speed (O2M / O2Q) ...

So just finished installing my air ride. The car starts. Runs fine. Shifts into all gears smoothly while off but wont shift into gears while idling....

I have a 2.0 jetta with an 020 trans in it.<p>and it has a slight grind when shifting into 2nd. <br>(grinds when shifting 1st to 2nd but not when...

This is really started to piss me off, need help... The trans is on a bench, installed the kit as instructions state but cannot compress the...

So I recently dropped a bolt into the transmission by accident :facepalm:. I decided to take the transmission down to try and get it out. I got the...

I had to replace Clutch in 1997 Jetta 2.0 gl 131,000 miles<br>I did this with motor in car , a pain to take out and put back in.<br>Well got...

Ok so after driving my car today (01 Golf 1.8t 5spd) and a LIGHT love tap from a speed bump (no cracks or anything on the tranny) I parked my car in...

Why not replace your worn stock clutch with something special? We have three great clutch conversion kits built around our ECS-engineered...

I have this problem where in 3rd gear only when I upshift or downshift there is a gear noise as if the speed of the gears dont match up and it...

90' Passat Estate with about 128k on it. Clutch felt perfectly fine.... Came out this morning to the clutch pedal to the floor. It will "snap"...

As some of you know from recent post, I have been having issues with my clutch. The engagement has been sporadic and in some instances, when the...

Okay so on my way home the clutch pedal went to the floor and was stock in gear, I pulled over turned off then put it in first and started it back up...

I have '99 Audi A3 (1.6, manual transmission). It started to make weird clacking sound while engine braking. If i push clutch pedal, sound goes off....

So I was driving my jetta mk3 and outta nowhere my gear where all misaligned and went under the hood and noticed that the transmission mount bracket...

The HPA Short Throw Shifter is manufactured from an all new dedicated casting which is CNC machined to precise tolerances. ...

My questions stems around not having the "divots" like in the OEM shift forks, which locks the fork in on the early 02M. People that have installed...

So mk2 vr6 swap. Got in car tonight and out of no where push clutch in and sticks to floor. Friend to bleed it real quick just to test, and nothing....

Got an 02A Trans ?? Then you better have a look at these upgraded billet shift linkage parts !...

So the 020 transmission in the 1995 cabrio lost the reverse gear. I had a spare close-ratio gti transmission and slapped it into the cabrio. Now the...

So I have a noise that I think is coming from inside trans. It is a clunk/clank that is most noticable at low speed with light acceleration and...

http://forums.vwvortex.com/showthread.php?6044364-HELP!-5-Speed-problems-seeking-all-help-please!&p=81902173#post81902173 Please read this. Need...

The latest big project for my cabrio! The 01M had finally did itself in, no reason to spend all the money on a rebuild or another one. So I decided...

I did a quick search, but couldn't find the answer I'm looking for. One of my cars is a 2012 Turbo Beetle. It's current level on tune is APR...

Need to rebuild my o2j

dont ask me how, but the main shift rod from the selector lever to the engine compartment developed a crack right near the base by the selector and...

I need to replace the clutch in my 97 jetta 2.0. from talking with different people i have heard that there are two different sized input shafts for...

I need part numbers for the 4th gear out of a LRS transmission from a t5 transporter 2.5tdi... And the tooth count. Thanks

Does anyone know how to tighten up the shifter? In 2004 I bought a used 1998 Golf and my brother who taught me how to drive manual went nuts when we...

I'm wondering if there's any downsides to removing the rubber stops like SQS suggest...

I recently replaced my slave cylinder after it went out or actually had a small leak and later found a small crack but i believe it may be too late....