Need to rebuild my o2j

http://forums.vwvortex.com/showthread.php?6044364-HELP!-5-Speed-problems-seeking-all-help-please!&p=81902173#post81902173 Please read this. Need...

dont ask me how, but the main shift rod from the selector lever to the engine compartment developed a crack right near the base by the selector and...

I need to replace the clutch in my 97 jetta 2.0. from talking with different people i have heard that there are two different sized input shafts for...

I need part numbers for the 4th gear out of a LRS transmission from a t5 transporter 2.5tdi... And the tooth count. Thanks

So mk2 vr6 swap. Got in car tonight and out of no where push clutch in and sticks to floor. Friend to bleed it real quick just to test, and nothing....

Does anyone know how to tighten up the shifter? In 2004 I bought a used 1998 Golf and my brother who taught me how to drive manual went nuts when we...

I'm wondering if there's any downsides to removing the rubber stops like SQS suggest...

I recently replaced my slave cylinder after it went out or actually had a small leak and later found a small crack but i believe it may be too late....

Okay so on my way home the clutch pedal went to the floor and was stock in gear, I pulled over turned off then put it in first and started it back up...

i want to see if a modern 02x tranny something off a b7 will bolt up to a 1.8t block.. i cant seem to find anything thanks :thumbup: also if a...

when driving normally all is fine, but when i lay on it in 1st, it feels like the shifter is being pulled forward past where it normally is, it also...

Shift Bracket Bushings Our billet aluminum bushings were designed to replace the factory rubber bushings that hold the shift linkage bracket to...

I've heard of people having good luck with GM Syncromesh so I decided to try it out and see what it does for my 2nd gear grind. I went and bought...

I recently swapped my 02a box, cables and tower for an 02j. I also have a dieselgeek sigma 5 shifter installed with it. The car shifts fine...

So, I am finishing the install of my Peloquin LSD. When attempting to put on the Flanges, they won't go all the way in and I can't thread the bolt. I...

if someone has a minute can you list everything I'll need to put 02m in place of 02j (destoyed that 3rd gear syncro) , i know axles will be needed,...

The HPA Short Throw Shifter is manufactured from an all new dedicated casting which is CNC machined to precise tolerances. ...

I've been living in Japan for 5+ years and have been away from the VW scene for a long time - especially 2L 8V. I'm now in Germany and about to...

Hey all im semi-new to the game but just wondering how do you know if you have an LSD? i ask since iv been looking for a couple days now and still...

Does the transfer case on a mk4 r32 or on a tt bolt up to any other box ? I know it goes on an 02m ... but other than there being a 5spd and 6spd...

Hey guys, Since the second day I received my car from the PO, third gear has been a bit choppy. When I'm doing hard acceleration if I don't...

I have '99 Audi A3 (1.6, manual transmission). It started to make weird clacking sound while engine braking. If i push clutch pedal, sound goes off....

hey guys, after 3 o2j's im going 02M finally. I need soem info. <p><br>i have the bentley CD for up to 2003, so im missing the details on the 02M....

I did a quick search, but couldn't find the answer I'm looking for. One of my cars is a 2012 Turbo Beetle. It's current level on tune is APR...

Got an 02A Trans ?? Then you better have a look at these upgraded billet shift linkage parts !...

http://www.uspmotorsports.com/images/usp_logo_1.jpg USP Motorsports presents - R32 Steel Shift Fork Transmission Upgrade - 6 Speed (O2M / O2Q) ...

Any solution for a block off on an 02a?

VW Volkswagen Golf 02A Gearbox 1st/2nd Gear Synchro Ring The product featured is a high quality aftermarket replacement VW Volkswagen Golf...

Ive been having some issues with the shifter linkage on my 2000 1.8T. I was just wondering if anyone might know what it take or involve to swap out...