hey guys i see some familiar names(malone) maybe i can get a hand i got my dads old 91 jetta coupay(dont worry i still got the 79 tdi-m) and back...

When the 1.6 engine is at proper temps, the engine likes to hang in the high rpms wven when the throttle is closed. the little electrical button for...

Hello, I am trying to figure out a strange noise that is present while at highway speeds in my 2012 VW Jetta TDI with 6MT. I only have noticed it on...

One of my glow plugs has gone out and has been verified by a VW technician, but I wanted to try to replace it myself. I looked in my engine bay...

O.K. heres the deal. As a newbe "soot head" I've taken on a 83 1.6diesel. Needing an injection pump I read, searched and read some more. What I...

Anybody out there got a picture of where the MAP sensor goes? I've heard that it bolts into the intercooler inlet, but when I checked mine, found no...

Hi all! I'm having some trouble with a 1.6na rabbit that I acquired recently, and I was hoping y'all would be able to help. Edited to Add: I have...

Can I use a 2l bottom end from a aba gas job motor with my 1.6 solid lifter diesel head and injection.<p><br>THe botom end went in my 1.6 rabbit D im...

Looking for some info. What I have found is more then confusing so I'm hoping this will be a simple easy to answer question for those that know more...

HPA Core Interlock Performance Motor Mounts are designed for comfort without compromise. http://www.hpamotorsport.com/forums/coreinter.jpg ...

I aquired a 1.6 n/a diesel engine. It wouldn't turn over so I took off the head. Seems that pistons are locked up inside. Is this worth anything or...

Okay so I've had the car for almost a year now and it's always had this problem of a white smokey startup, runs rough, and smokes for 10 mins or...

Ever since I drove a mk3 Jetta TDI I was amazed at the performance, something I had only experienced with the later Turbo Diesel Mercedes Benz 300...

http://www.hpamotorsport.com/images/drive/dsglogo_grey.jpg Unlike simple engine tuning which involves the use of one of many readily available...

Buying a relay for my 78 diesel and just wanted to know if this is the best price i can get with shipping to Toronto Canada....

1.6 Turbo Diesel, Wont Start, No Fuel at Injection Pump Lines? Any Ideas Why or What to Check? No fuel at the injection pump lines or injection...

Beat my head for a week and also read the search topics. My trusty 1.6 cracked a cylinder, had a total rebuilt 1.6 ready to go. Dropped it in and...

I'm currently rebuilding my 1.6td and need a piston oil sprayer(the old one broke and caused some damage) anybody got a spare one sitting around?...

Hi Guys, I need to replace my 1.9 110bhp ALH engine due failure, what other blocks could I use? I could take the turbo and injectors, etc, off my...

working on 85 golf w/ 1.6 td have set belt timing and pump timing but hard to start blow white smoke and does not wnt to stay running please...

I have a 1998 Jetta TDI with bigger injectors, turned up pump and some other things. I just had 3 inch straight pipe exhaust put on it yesterday and...

Hey guys, I have an '02 Golf TDI and my AC stopped working. I'm hoping someone can not only point out where it is in the engine so I can start...

Hello all, Recently bought a ABF/EAA Engineering premium serpentine belt conversion kit for my 81 1.6 n/a diesel. Needed to get rid of the a/c /...

I'm a new member here. So far, I have already found great answers for questions to the Golf I bought a few months ago. Last week, my passenger...

Hi, I have a 84 1.6 L idi, and I have a 1.9 L TDI 1Z complete from a 96 Passat , has a burned piston. What I would like to do for a while is to bolt...

Has anyone swapped a 1.6 td hyd head onto anAAZ block?I've looked at pictures of the gaskets and it looks like the aaz has more water passages.what...

Hello everyone, Im stationed over in Germany and I have a strange issue with my golf. First off, Its a 1993 Diesel, Engine Code 1y it has no A/C or...

Spotted and photographed by a user over at ecomodder.com; see thread at...

Had a local fellow come in today and take apart the injection pump in order to install new seals, etc. Everything went well ... until the last...

For the last week, on my 30 mile round trip commute I receive a MIL for my engine while driving home. Using a vag-com I receive the following error:...