I have an OBD1 12v VR engine that I picked up months ago and was planning on using it to replace the high mileage OBD2 motor in my GLX. Was prepping...

Hey Im a Newbie and felt I should share some knowledge of swaping a Ford EDIS 6 coil onto the VR6. Like alot of VR6 owners I started having Misfires....

striped a hole in the bell housing would I be fine to leave that bolt out for a while and not risk it cracking or anything?

When wiring in a standalone ecu (vems specifically), are the sensors on the alternator, transmission (2), starter, and oil filter housing unused?...

So I recently had the privilege of installing the new INA VR6 race oil pan on my car. The unit that I have is a pre-production unit, but as far as i...

Hey guys ive posted up acouple questions about boosting advice and all that stuff. i cam across a set of 262 autotech cams, id like to install in my...

my cars pretty low, around 21.5" FTG. but i had raised it up because the passenger side axle was rubbing the frame... Last night i was jumping on...

So yesterday the alternator fried and toasted the battery with it, today I put a new oem alternator in and a new battery. Now my air bag light is on...

I had some free time and all the necessary pics, so I put this little DIY together. Hope it's useful to someone. <IMG NAME="icon"...

I broke my secondary air pump hose/tube when I was installing a new SAP. Cant find one ANYWHERE!:facepalm: Just trying to see if there are any fixes...

Well... can you run a gt28rs on a vr and what would be needed to make it work since its not so straight forward like other set ups. Don't be a debbie...

I just did a turbo build on my vr6 and when I start it I get a roughe idle, a strange knocking noise (sounds like maybe valves?). The knock echos so...

Hey Everyone! Currently in the process of VRT swapping my B5 S4. Here is my question. I am avoiding running standalone for a few...

Stumbled upon this on My350z site while researching FI for my Z..... A very ambitious project, I personally think an Rb26 project would have made...

Hey guys, so I've been working at this for far too long now and had too many problems. It's time for me to ask some questions because I'm clearly...

12v coilpack motor that decides it wants to start only when it feels like it. there is no pattern to the no start besides the fact that it will start...

Pretty straight forward question. Can I also the gasket of a AAA engine on my AFP block. What's the pros and cons? Sent from my Samsung Galaxy S3...

Well it's taken close to a year of hunting, ordering and collecting, but it's all here now! I know, I know, there's been lots of 2.9 build threads,...

Running out of patience trying to get my fresh 2.9 build started.... engine will not start/run and keeps flooding badly. At this point I've checked...

i did a vr6 swap into a 4door wolfsburg ob2. i Am getting no fuel or prime from the pump. i have changed -ingnition switch fuel pump fuel pump...

Car: Mk2 jetta Motor: OBD1 Dizzy VR6 from a b3 passat ~ 225k km's Problem: Car starts and idles fine comes down to a steady 1000 rpm, but...

Recently the car has been wanting to cut out badly at full throttle between 3-4k. If you stay in the throttle it will generally kick back in and go....

i swear i saw it before and now i cant find it anywhere it was an aluminum oil filter houseing, the part that bolts to the block and had some AN...

From the people that have fully built VRTs, I'd actually be interested in your build. There are a lot of ideas, but also a lot of questions that I...

So today I was helping a friend with his vr6. It ended up that his coilpack was bad, so I put mine on is for a little. After I was done I put my...

Was wondering if you had some time to take a couple measurements... Crank Pully to back of block Bottom of pan to top of valve cover Width at...

Hola necesito su ayuda de expertos en a/c mi compresor no enciende si le pongo corriente directa si funciona la luz de a/c en el tablero tampoco...

I had 2 wires sheared off the o2 sensor male connector from the wiring harness, and 2 are still in position. Ended up buying some single wire...

New Product http://www.intengineering.com/intblog/wp-content/uploads/2012/11/12VVR6FR.jpg This is an Integrated Engineering billet aluminum fuel...

http://www.urotuned.com/free_shipping-300.jpg http://www.urotuned.com/urotuning_images/mk3_vr6_shift_bushing_kit.jpg Got some unwanted...