<B>Overview</B> Megasquirt is an aftermarket engine management system that can control fuel only (MS) or spark too (MSnS). It is a build it yourself...

attempted a search found nothing. im doing a radiator replacement on my 16v gti currently installed with a 675mm rad. im looking to. clean up my...

Hello. Probably stupid question - I would be grateful if someone could tell - is that thing in this picture...

Ok decided to make a new thread since the previous was me looking for the actual pump.So I managed to get my hands on a Supervee Oil Pump and...

FIND INA Engineering Inc. on Facebook! http://i226.photobucket.com/albums/dd25/issamabed/06X-16V---Bottom-End--01.jpg...

The engine runs rough at idle, exhaust smells really rich, feels rough on accel in neutral till 2500 rpm. Compression 180 psi all Timing 6 btdc...

Hi all! I am trying to find the oem number for the TPS sensor that sits on the Passat 2.0 16v Automatic that can be used for example Megasquirting...

.

ABA engine is 8v 9A/ABF engine is 16v correct? but one could have a ABA 8v block with a 16v head from a 2.0L with updates to supportive...

I did numerous searches, couldn't find any discussion on the valve options for the 16v. Lots on determining the lightest lifter/tappet and I see that...

The fuel pump does not prime when the key is put into the run position. i have power at the knock box, the ecu, and the icm. the fuel pump...

Can anyone clarify which RHS motor mount is in the photo below? http://i213.photobucket.com/albums/cc284/XR650L_Aaron/IMG_00000018_zps70777293.jpg...

hi everyone. i have what looks like a small leaking coming from behind my distributor. i first thought it was my valve cover gasket. but i changed it...

2001 VW Golf 1.4 Hi all! Bought this car last Summer knowing it had a knock sensor error, but thinking it was a quick easy fix... I have...

Long story short I've had an MSD on my 9a for years. Last week I went to clean my grounds, ended up disconnecting the head to coil ground. Car...

I just got the car on road was running great then started running rough then died changed computer dist wires coil ingition module and car only gets...

got it, re-installed the old belt, got my brother to help, all good. thanks. :thumbup: need/want to change the camshaft seal before this engine...

car starts and runs great when it has sat over night for about 3 or 4 min just enough to start to heat up then will rev up if it gets loaded up with...