what's up guys... i'll start by sayin some of you might remember me and my car "the beast" pictured below. it was a long a fun project and ended with...

running stock cams and I am only pulling about 16 or 17 hg<p>Car idles rough with all new vac lines and gaskets.<p>

I have a 1992 B3 2.0 16V which has always run like a dream until about a week ago when it died completely. I pulled it home and dropped the external...

using a 1ml graduated cylinder and motor oil, calculated my 2.0 16v head combustion chamber at 47cc. This was with valves in a clean chamber not...

Hi a mighty car mods member told me you guys were the lads to ask about this. Basically I drive a 75 bhp 1.4 Bora and I'm curious as to why the...

<B>Overview</B> Megasquirt is an aftermarket engine management system that can control fuel only (MS) or spark too (MSnS). It is a build it yourself...

attempted a search found nothing. im doing a radiator replacement on my 16v gti currently installed with a 675mm rad. im looking to. clean up my...

Hello. Probably stupid question - I would be grateful if someone could tell - is that thing in this picture...

Ok decided to make a new thread since the previous was me looking for the actual pump.So I managed to get my hands on a Supervee Oil Pump and...

FIND INA Engineering Inc. on Facebook! http://i226.photobucket.com/albums/dd25/issamabed/06X-16V---Bottom-End--01.jpg...

The engine runs rough at idle, exhaust smells really rich, feels rough on accel in neutral till 2500 rpm. Compression 180 psi all Timing 6 btdc...

Hi all! I am trying to find the oem number for the TPS sensor that sits on the Passat 2.0 16v Automatic that can be used for example Megasquirting...

.

ABA engine is 8v 9A/ABF engine is 16v correct? but one could have a ABA 8v block with a 16v head from a 2.0L with updates to supportive...

I did numerous searches, couldn't find any discussion on the valve options for the 16v. Lots on determining the lightest lifter/tappet and I see that...

The fuel pump does not prime when the key is put into the run position. i have power at the knock box, the ecu, and the icm. the fuel pump...

Can anyone clarify which RHS motor mount is in the photo below? http://i213.photobucket.com/albums/cc284/XR650L_Aaron/IMG_00000018_zps70777293.jpg...

hi everyone. i have what looks like a small leaking coming from behind my distributor. i first thought it was my valve cover gasket. but i changed it...