So the story goes as me having a G60 Corrado. When I bought the car I was unsure on the condition of the charger, sure enough it was on its way out....

I've been doing some research for a rebuild I'm doing and have put together A LOT of info I've found useful and figured I'd share it. Here's a...

Just recently changed the vacuum hose going to the computer, you know the one, the one that absolutely positively has to be 1 meter long or a zombie...

i have a custom chip for 310 injectors but not sure on spec of pressure needed

My advice is DON"T DO IT :P I can see the light! This car has been sitting for quite a few years but I recently got motivated to get her back...

Top whp List<p><b>8v G60</b><p>1.SciroccoR - HIGHEST WHP G60 8V HYDRAULIC LIFTER HEAD <br>VW motorsport Gruppe N: head (8v hydraulic lifter), intake...

Put charger in has good boost no leaks but does not have the power it shoild

Just wanted to know what are the benefits of removing the boost return? Also, besides the block plate on the charger what else needs to be done?

I recently had my PG rebuilt with new rod bearings, rod bolts, rings, honed and was wondering if you guys recommend a particular type of oil to break...

<U><FONT COLOR="orange"><B>EXTERNAL WATER PUMP BLOCK:</B></FONT></U><p><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote,...

I got to set my car for emission testing. so back to stock settings I currently use a aeromotive adjustable regulator so since I know the...

What do G60 owners do for an improved intake manifold?<p>As the Stock one doesn't flow all that well.<p>Here is what I've found to work well for an...

I just wanted to show my own work. Full exhaust system made by my own. Silencers also hand made :D Everything made from stainless steel, wielded by...

Lookinmg for info...I have a G60 longblock that shows between 50-55 psi cold...turned by hand and read only after the first compression stroke...is...

BECK ARNLEY 158-0239 Does anyone know if this could be used as a alternate FPR to the bosch 3.5 FPR. its for the porsche 2.5l turbo. or could...

http://gruvenparts.com/website/imgs/fullsize/200.jpg Corrado Billet Upper "Rad Neck" www.GruvenParts.com has designed a TIG welded billet...

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/582602_3996729768949_1933303185_n.jpg MJM is ready to launch off in 2013 with the very best in both...

i tried the faq. Just a bunch of turbo G60 bs when its really a pg turbo, not a G60 turbo. I've done a pg turbo a couple of times. I want to turbo...

Has anyone managed to find a source for replacement bushes for the g-lader belt tensioner damper?

theres some old posts on here where folk including myself have used the ajustable voltage reg ib373a on thier g60 to gain a bit more charge im...

hey guy im in the last stages of finishing a 3 year project i have a full built stage 3 motor and charger, the issue i have is when i went to put the...

Guys, I got a buddy's Corrado 16V Turbo and its not firing on 1 and 4. ABA bottom end 16 valve head C2 motor sport chip 440CC injectors I am...

I'm working on designing a tshirt featuring the G60 charger and i need a good pic of one to vectorize or digitalize for an outline to use in a simple...

The ulimate reliable INEXPENSIVE alternative to a gladder....<p>There are some older pics btw..<p> <IMG...

As you all know, we do much more than just the G60 these days. Every-time I think this part of our business is going to the ways of the dinosaurs,...