It's that time of year again, weather is turning nice, birds are chirping, days are getting longer, and most importantly, time to start having fun...

I have a 2003 VR6 24v that runs like a top with 72k miles. (Bought it brand new, never modded a thing - bone stock. I got a backfire after driving...

i have a vr624v. is it worth doing porting an polishing can i get some help and if so how would know if it was done. and not them just telling me it...

I am about out of ideas of what could be wrong. I have an '03 24v VR6 with 106k on it. Recently I replaced the auxiliary water pump because I noticed...

Alright, so this same thing happened to me last year and it happened to he the coils on two cylinders. I went ahead and changed all six at the same...

So I the process of doing this R head swap I figured why not just take out the engine and everything and clean it up a bit. I can't drive the car...

Thank you for the replies. These are in stock now.<p>Call for info or to order.Direct purchase links below.<p><b>Cost $374.95</b> shipped ground...

Hey, i'm not sure if its normal but this intake manifold puffs up when i give it some gas. I was wondering if that was normal... :screwy: Just the...

Yesterday I replaced all my brakes and ended up with a horrible grinding noise. Upon further inspection, I had put one of my brake pads on backwards...

My car suddenly shuts off like there is no gas and the battery indicator light comes on when driving. This has been happening to me on 1/4 tank above...

Whats going on? Currently in the process of wiring an aem fic 6 into my 24v vr6 but im missing a huge part, powering the actual fic unit. Cant find...

http://www.ctsturbo.com/cart/images/images/english/imageLogo.jpg Please note these kits are on sale for the time being, pricing is as follows:...

I open the door and the pump doesn't prime. I go to turn key and the fuel pump fuse pops. I put a new fuse in and disconnect the relay and it doesn't...

Hi out there I have a 1996 gti vr6 and it try's to turn over but ultimately does not I thought it was my tps so I bought a new throttle body and...

So I've been having coolant issues on my 03 gli First it was the water pump which I replaced and didn't have any issues till months later...I am...

Hi I'm new to all this. I'm lookin to buy a vr6 and I was just wondering if there are any serious defects that will have to be addressed. I have...

http://www.gruvenparts.com/website/imgs/fullsize/100.jpg Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32! DOES NOT COME WITH CHEAP...

http://www.goapr.com/news/wp-content/uploads/2013/05/sowo-2013.png APR is a proud sponsor of Southern Worthersee in Helen Georgia and will be on...

I am currently in the process of doing the whole .:R head conversion. As of right now the head is off at the machine shop getting port matched with...

Hello everyone, I am currently out in the garage working on this project finishing up the wiring for the AEM FIC controller and my gauges. I will...

Ok guys, I'm replacing my pre cat O2 after I received code P0141, (bank 1 sensor 1 which is a 5 wire) heater circuit malfunction. I purchased a Bosch...

If anyone wants a CF carbonio CAI that used to be on my 24v click this: http://philadelphia.craigslist.org/pts/3729290817.html Goes in the...

so i'm pretty sure i have a vacuum leak somewhere, and this is the only spot that i've come across so far. i have codes p1152 and p0420. it's in...

what are your must dos for the engine.. obviously rods and pistons.. how stout are the stock valves.. esepcially when upgrading cams/springs. ...

http://img.photobucket.com/albums/v223/qballc/somecompany/USRTinjBanner2.jpg With 500hp and 11sec track times becoming a new "norm" nowadays and...

Need to replace the valve cover gasket in my 02 Eurovan. Question is how difficult is it and how long does it take? Something to do afterwork or wait...

ok. so.....I bought a 03 GTI 24v for Cheap. The car was overheated and needed a head. I bought a head and found the cam journals were shot so I...

Has anyone flashed their ecu with the stage 2 from Unitronic? Are the gains really around 26hp??? Thanks

Ill start from the beginning :) Well I bought a 4motion cheap as a project as it has sucked up water, with the plan to rebuild with forged rods,...

So the trans is drained and unbolted (i counted 8 bolts, which other threads have confirmed) but I'm having a hell of a time getting the thing to...