Okay my car will go into 5th if im downshifting from 6th but if im shifting up from 4th it wont go into 5th. If I place the shifter in 3rd I can...

I have a 2003 VR6 24v that runs like a top with 72k miles. (Bought it brand new, never modded a thing - bone stock. I got a backfire after driving...

I am about out of ideas of what could be wrong. I have an '03 24v VR6 with 106k on it. Recently I replaced the auxiliary water pump because I noticed...

hey vortex i need help.. i got 2003 gli vr6.. when i drive it doesnt rev past 2000rpm in all gears and theres a check engine light. the codes are...

Hi I just purchased a 2003 gti vr6. I replaced the coil pack for cylinder 3 to solve the misfire related codes but it is still setting p1338 and...

the last couple days my car has been okay. but I have been noticing that my fan turns on very late. I was thinking that it could probably be that...

Is there anything I can replace, clean or check while I'm there. I know I have to take the Front End OFF so I would like to know If any of you guys...

Fuel gauge only works about 60% of the time, guessing its the sender. Found the fuel pump with the sender. I have never replaced a fuel pump before,...

Thank you for the replies. These are in stock now.<p>Call for info or to order.Direct purchase links below.<p><b>Cost $374.95</b> shipped ground...

Just bought this mk4 VR6 about 2 weeks ago and realized the when shifting and letting off the clutch I feel the engine jerk....:banghead: I have...

It's that time of year again, weather is turning nice, birds are chirping, days are getting longer, and most importantly, time to start having fun...

http://www.gruvenparts.com/website/imgs/fullsize/100.jpg Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32! DOES NOT COME WITH CHEAP...

Whats going on? Currently in the process of wiring an aem fic 6 into my 24v vr6 but im missing a huge part, powering the actual fic unit. Cant find...

Yesterday I replaced all my brakes and ended up with a horrible grinding noise. Upon further inspection, I had put one of my brake pads on backwards...

i have a vr624v. is it worth doing porting an polishing can i get some help and if so how would know if it was done. and not them just telling me it...

what the best header for the gti vr6 24v 03 miltek or supersprint and where can i get the best price.

I know this thread has been created more than a thousand times but I'm new here and I was just wondering if there was some simple solutions for...

After doing the crack pipe and t-stat housing on my car, I found the 12v and 24v were different enough that it might be worth it to some to have a...

Hey, i'm not sure if its normal but this intake manifold puffs up when i give it some gas. I was wondering if that was normal... :screwy: Just the...

Alright, so this same thing happened to me last year and it happened to he the coils on two cylinders. I went ahead and changed all six at the same...

So I the process of doing this R head swap I figured why not just take out the engine and everything and clean it up a bit. I can't drive the car...

My car suddenly shuts off like there is no gas and the battery indicator light comes on when driving. This has been happening to me on 1/4 tank above...

http://www.ctsturbo.com/cart/images/images/english/imageLogo.jpg Please note these kits are on sale for the time being, pricing is as follows:...

I open the door and the pump doesn't prime. I go to turn key and the fuel pump fuse pops. I put a new fuse in and disconnect the relay and it doesn't...

Hi out there I have a 1996 gti vr6 and it try's to turn over but ultimately does not I thought it was my tps so I bought a new throttle body and...

So I've been having coolant issues on my 03 gli First it was the water pump which I replaced and didn't have any issues till months later...I am...

Hi I'm new to all this. I'm lookin to buy a vr6 and I was just wondering if there are any serious defects that will have to be addressed. I have...

http://www.goapr.com/news/wp-content/uploads/2013/05/sowo-2013.png APR is a proud sponsor of Southern Worthersee in Helen Georgia and will be on...

I am currently in the process of doing the whole .:R head conversion. As of right now the head is off at the machine shop getting port matched with...

Hello everyone, I am currently out in the garage working on this project finishing up the wiring for the AEM FIC controller and my gauges. I will...