I want to make a code for Enabling TPMS 7K6 but unfortunately could not make the long code I get it...
I have a 2007 MKV GTi. I am having Immoblizer active warning when I attempt to start my car. I have purchased Super Vag K+CAN. It says it supports up...
My 2009 JSW is in need of a few upgrades to equipment that's become available on later models, in other markets, or both. Much will need recoding...
Guys, after I have rebuild my car engine and put it together This error started to show. I don't know where this pump is, or where is the...
2000 gti VR6 (AFP) @110000 miles I have a rhythmic stumble that does not show up as a misfire. The stumble seems more random at idle, but is...
Hey everybody, I just purchased a 2000 Jetta TDI and the windows themselves don't roll down. I have checked the fuse on the side of the dash and...
Have a hex+can interface so can scan most from 1995-2012 donot have 2+2 adapter though. In the scanton/wilksberre area of PA, Text 5706047947 Beer...
is it possible to add alarm beep to audi q7,i have vcds,,when i lock doors it beeps/chirps?
Got a code p1544 on my 2000 jetta mk4. My scanner at work (actron) said it was a door tampering monitor b, i can see this being the problem because...
OK.. trying to fix this car for my friend.<p>The old Kessy module is shot so we bought a new one and installed it. Now I need to code it.<p>I know...
I have had the occasional error displayed on the MFA indicating the fuel cap was loose/open but it was rare and always went away. Last night the MIL...
I keep getting this code even after i clear the code crank the car over and rescan it it pops right back... someone please help me... Car 2002 GTI...
THANKS! Thursday,21,March,2013,11:56:02:04763 VCDS Version: Release 11.11.5 Data version: 20121222 ...
Car had a few leaks in the charge system fixed, a new o2 sensor put in and a used ECU installed. When the car first went in the idle was going up and...
today I was coming from work and the cel going on, i did some scan and gave me this: Thursday,21,March,2013,18:22:41:61599 VCDS Version: Release...
Ah here's the technical part of the forum. VW 2001 Cabrio GLS Hi, I recently discovered my cab has a P2185 diagnostic code that started today. MIL...
01 audi tt 1.8t. Car drives fine, and then wont accelerate/engine won't go above 1200rpm and check engine light comes on. Shut car off and restart...
Drove my car home just fine absolutely no issues then it just goes crazy on me when I try to head to the store. Seems like it reset the clock and the...
Hello all. I am new here, so please forgive me if I am doing this wrong, but is there anyone who could help me reset my radio code with vagcom /...
My car will not start, nor will it turn over. BC timing is off? Heres what i got prior to swapping ecu's and prior to replacing clutch kit/Tranny...
A few weeks ago I had a Stage 2 tune done to my MkV GTi. Ever since its been tripping an over/under boost code that I've traced to the diverter. I...
just received my cable and scanned my 96 golf and low and behold, no engine controllor, below is my scan. any ideas on where to look to solve this...
I was wondering if anyone in the Denver metro area has a vag com to turn my DRL off and xenon option on and a few other vag tricks. I would be more...
Car wouldn't start after work so I scanned it and this is what I got. Any ideas Thursday,21,March,2013,20:09:37:33600 VCDS Version: Beta...
Why can I not change the adaptation channels in the engine controller for a 2008 Jetta? I have ME 7.1.1 if this helps...everytime i try to change any...
Hi, I have a 2001 1.8t Wolfsburg Edition Jetta with 113k miles... My 3 codes are 17705 (boost leak), 16684 (multiple misfire) and 16683 (cylinder 4...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules