Original owner, since new, of '84 QSW (European delivery) which is in process of engine swap, putting in a newly built 20 valve turbo 5-cyl Audi...

:confused:

Posting this for reference/discussion purposes. Later posts also document the taredown/rebuild of my own viscous coupler. While the Vanagon VCs are...

I'm a fabricator by trade and have a 90 corrado begging for haldex. Since I'm buying a B4V with haldex I built a while back for a customer, I'll have...

okay well i recently scooped up a b5 s4 rear setup diff floor pan and all i am going to cut my floor out and weld this one in place and make that...

http://www.hpamotorsport.com/images/drive/haldex-collage.jpg Most Mk5 based 4-motion equipped cars use Haldex's second generation of AWD systems....

http://www.hpamotorsport.com/images/drive/haldex-collage.jpg The newest generation of 4Motion equipped cars use Haldex's fourth generation of AWD...

Converted my syncro to discs, drums no longer needed, just have the two friction surfaces. $40 plus shipping....

so i took my allroad in to the shop to have the trans rebuilt, just got the car back and about a day later, it started making a high pitched buzzing...

I searched high and low on the forum and on FAQ. So far what I can see is that a peloquin diff and shifter fork upgrade is a must. What else do I...

I'm posting this thread to see if there is any interest in syncro owners wanting to purchase new factory oem propshaft bearings. I have a way to get...

I'm splitting apart my tranny to do the upper and lower timing chains. I just want to ask the best way to separate this from the motor. Do I separate...

I have collected parts for some time now, and even if it will take some tome to finish I'll post some pics of it.<p>Some specs:<br>Front 5x100, wide...

I have a 2008 VW R32 with 54k miles and I have been having wierd wobbly behavior that I have been attributing to alignment issues or suspension, but...

OK heres my little project, When i first went into i thought it would be pretty easy. In my head it sounded like it would be easy.. Dizzy kinda...

Here are some pics from the latest project. I personally haven't seen AWD in a mk2 done like this before, but I could be wrong. TT trans and R32...

I want to know if it fit and what I have to do and get

I have already located all the parts I could need from an r32. Found a few places that have multiple wrecked R32's and parts to work with. I am a...

http://i709.photobucket.com/albums/ww99/stmtuning/DSC02034.jpg Doner car. 2003 tt roadster. Engine. 2.0 20v full of goodies. Built in2010. 526whp...

i have a 4 motion controller for sale. it is brand new in box never installed. <p>i bought it for my mk2 haldex swap but have sinced parted out the...

i am currently building a 79 2 door rabbit syncro. i bought some syncro parts but having trouble locating front cv axle for ps. the trans is to be...

Is there a source for these other than the dealer? I have a friend in the parts at one so I am having him look into them for me, but I read some...

Hi, I have recently brought a 99 B5 Passat syncro model. a couple of weeks ago it went from being absolutely fine, so driving like the CV's were...

Looking to do an AWD swap, and i was wonder if Im able to modify my existing DSG, or would i have to buy a new new one. Are we able to add a T-case...

Who has run the quaife rear diff kit? does it change anything with the VC? or is it just a lsd kit?...

Install 4 motion on his car Golf 4 (1.8T) MONO question hood spare parts on my machine is already on the factory :ABS,ESP photo, parts that are on...

04/04/2013 The pictures were on an old computer and Apple, being the crappy company that they are, deleted everything because well Apple does what...

First off, excuse any spelling errors, I'm typing this from my phone. I have a Passat Syncro Wagon which I swapped to an ABA. With all the extras...

I recently converted my 06 Passat 2.0T to awd. I coded the abs,can bus , etc Everything works but but when I go into Ecu to code and check off awd it...