Hello all, The car is an 85' GTI engine code HT. It has always taken a few seconds of cranking to start for the last 3 or 4 years, but it...

Hey guys, (I posted this in the MK II forums where I usually am, but thought it would help to post it here too)... I've about run my course with...

So I need some help getting these out of the head. I tried following the bently which said 12mm allen head socket. 12mm is to big. 11mm fits but...

got 88 fox wagon w/cis-e. rebuilt head,cleaned injectors and lines. only gets gas to injectors if I hold the air meter plate up w/magnet. could it be...

I need some help understanding how the fuel relay and circuit works. When I try to start the car the fuel cuts when the engine starts to turnover. ...

I'm working on a 1982 Scirocco, Cali CIS Lambda. The following items have been replaced in the past two years: -Injector Seals -Intake Boots -All...

I swapped out the cap/condenser/plugs/wires. Sprayed WD40 into the spark plug holes and turned it over by hand a few dozen times. I don't dare turn...

my 89 cabrio will not start unles i out my foot to the floor on the gas peddle i filled it up with 89 plus gas the other day and added a bottle of...

I'm looking to buy some new/ or used cis injectors for a cis basic car. ( in this case its an 88 Fox) Anyone know a good place with good prices? ...

I've tried searching, but cannot find this particular condition on the site. Looking at Poor Richard's diagram, it looks like the only path it...

I am running a 1985 gti with cise. I hate cise. I have herd cis is way more reliable. What is needed and is it worth it. This is for my chump car...

got 88 fox wagon w/cis-e. rebuilt head,cleaned injectors and lines. only gets gas to injectors if I hold the air meter plate up w/magnet. could it be...

I had some time under the hood this weekend - but still have yet to fix the issue I'm having - so I thought I'd see if anyone in the CIS section had...

can anyone help me? i have a 92 gti 16v and the air filter box has no bottom. the dealer discontinued the part and im trying to get around this...

Hello all. I am adding a thread for my build in this forum as it seems I might find some CIS sympathetics here. My build is at about 90% and I have...

well first can someone explain the different types of cis there are? i have a mk2 golf 8v thats cis lambda. my problem with my car is that when...

building a turbo vr for my coupe vehicle has 191 906 091h fuel pump, was wondering if any one has the flow spec's for this pump, i would like to to...

CIS-E replacement throttle switches So, VW has NLA'ed the throttle switch (idle / WOT) switch assembly (VW part# 027-133-061-B) Fear not! ...

Really getting tired of trying to figure out the 88 cabriolet in the garage. Hard start cold, hot, or just about whenever. Once its warm and running...

Ok so my 83 rabbit convertible is a 1.7 CIS injection http://i.imgur.com/PDaBdeV.jpg and I pulled the motor from an 88 cabriolet 1.8 CIS 8v...

So I bought an 87 gti. It didn't run when I bought it, the guy said he had to keep having it tuned. By tuned he showed me the air mixture screw....

In other words, no reading at all, 0 mA. That is, until i close the full throttle switch. Then the dpr current goes to 10.19 mA. Release the...