Type: Posts; User: dfonzi88
Anyone have a pin out for the cluster connector? Bought and swapped in a new cluster today. Same issues:confused:
Did you run the shifter cables through the firewall? Any issues with them binding up? I've got an 02j in mine and I can't get it adjusted properly. I've got it 90% there but it's...
i have some random junk laying around. low ball me, i'll need beer money anyway
brake boosters both from a vr $15 each
vr6 throttle cable $10
vr6 fuel rail $10
vr6 sai pump $15
That's my buddy's truck now. The trans is definitely good he ran it all last summer.
I also know if there was a quaife diff in that trans when he bought the truck it's still there.
Checked the resistance between the body and ground pin. Only a few ohms there.
I checked all pins on the voltage regulator for power also. Nothing at any of them.
I appreciate all the help! :beer:
High beam light/directional lights don't work either :screwy:
Nothing at all works but the backlight
I tested the voltage stabilizer and it's getting ground...
I don't think it's in the main plug, I did allot of wiggling and still nothing. The cluster does illuminate with the lights on but that is it.
I put power to pin 13 and the brake light...
I recently 1.8t swapped my 83 gti and now i'm not getting anything from the cluster no lights, gauges, or anything. It has worked since the swap so i'm sure it's something stupid :banghead:
Didn't see one of these up yet.
I've got a mk1 late westy gti front spoiler in royal red with the side mounting trim $100 obo
Late westy mk1 gti steering wheel $40 obo
Possibly looking for...
Long gone. Sorry
Damn the cluster looks awesome!
what was the problem with the cluster. i still cant figure mine out:banghead:
nice work with the power steering res:thumbup:
I haven't aligned it yet but they don't clear even full positive camber. I'm going to run 165 50s.
Mk1scott what coils are you running?
That dead pedal looks good but how does it mount?
I only asked because it seems the STs strut bodies are thicker than most. I wasn't sure if there is more clearance from one manufacturer to another...
May be a common issue. But it's still an...
Thanks for those helpful responses.
I wen't to test fit my new wheels today and the inside lip doesn't clear the spring collar on my STs. It looks like i will need at least a 12mm spacer to make them clear but i really don't want them...