Type: Posts; User: rysskii3
Just one left.
lightweight crank pulley will help too
Depends on the pump. Is it push or pull style? But for me, no matter what, I would not put the pump where it's so hot.
Decide to flush the brake fluid today. The old fluid, aka the dirty one, has about 4k on it in about 1.5 years.
The cams are tt street cams. Nothing aggressive. They are pretty good. Plenty of power throughout the entire rpm range. I can feel the power dies down around 7k, so I have the rev limiter set at...
Shorter runners, on the other hand, usually flow better at higher engine rpm. Reducing the length of the runners may allow the engine to make more power at the top end, but the trade-off may be a...
I hope you know what is the difference between long and short runners .
or header and catback from tt. expensive but worth it
search the thread. there is a link to the site...
damn. how big was the extingusher? Just wondering if I should upgrade from 10bc to something larger. I recall you did the bike carb swap. Would you happen to have a picture of the setup before the...
damn dude, what happened?
Exactly. Why get anything else when this combination has been tested by many. It works, so don't even bother with other stuff.
Use only good stuff on your build. If you use cheap stuff now, you will pay for it later.
a ton. probably more than original mk2 parts
I just don't want to pull the transmission out and wait a month to drive the car again. Its easier to get another 2y transmission, install LSD and then swap it in.