Type: Posts; User: Jefnes3
We have a few Golf R cars outside the USA. Loba turbo, GT30 turbo, Stock K04 and some DSG too.
The difficulty we've had is proper local support. We are looking into Aus market.
S3 box is for surr shorter than A3.
a3 matches TDI
s3 matches gti.
From older boxes: we got 3 gear sets: 4cyl, vr6, tdi
(short to long)
That seems to be similar on Mk6 vw cars.
Don't throw us under the bus here...like we left you in the cold.
You came to the chop in CT, two times.
some hours were spent on your car, free of charge.
you chose to ignore...
No 'magic' in Sam's tune.
We simply took advantage of all the parts he bolted on.
Aftermarket rods allows no torque limit.
We have seen 380-400ftlbs at the wheels on K04 cars.
Peak torque with the Loba will be similar.
This is close to your rated 480.
Good luck with sale.
Small turbo choice helps spool.
On pump gas I've often used low comp pistons and head spacer.
This combo does well running 26-32psi boost on proper turbo, nets into mid 600's whp.
UM Loaded Stage 2 tune has low rpm K04 compressor surge sorted.
We have tuned a ~few Forge actuator cars.
My opinion: don't buy Forge actuator.
Why: no ~real gain in power can be had with it.
Max torque limited by rods in the midrange, the stock gate an...
If you get all the basics done: fluid change, clutch alignment. Try United Motorports DSG software.
We still work on improving DSG software.
Current UM customers: see your UM dealer about an...
The pop is a side effect of the stock rev hang removal. No damage caused to any parts.
In some cases: the solution is to remove the rev hang delete features. The difficulty in a universal fix, is...
Please contact your local dealer for support.
I fully understand the cause/fix of the pop.
Some more understanding is needed here...
We never said this was impossible, we've done it, just that the task is difficult.
LC is controlled by DSG, not the engine. Where...
I have run full stock motors well past 8K without real issue.
On the stock cam they dont flow well, and toss the serp. belt when u spend time over ~7500, but no valve float at 8k....
There is a lot of people that do not understand this system, as displayed here education is clearly needed.
To customers: Simply drive a car equipped with our Haldex software, you will easily...
FYI: your '09 is not ME7.x
A few notes:
'05 and '06 2.5L is 1 Meg ME7
'07and '08 2.5L is 2 Meg ME7
'09 is ME17
'10-up is ME17 with secuirty exploit closed (i.e. must be opened to unlock)
That's the plan.
What you describe is the nature of how Gen1 and Gen2 4Mo function.... they cannot apply any clutch torque until the fluid is moving. Some wheel speed is required to pump the fluid.