Type: Posts; User: weeblebiker
read second post in the thread
now help me find a black s2 16v manual door that isnt dented...
yah got a couple sets, but I need a pic to tell which are the pl or 9a or aba.
that looks like it could be really fun to play with!
have you measured the center to center spacing?
16v intake ports are 88mm.
I'd be interested in it to play with if your not:wave:
do not do this.
cis motronic runs at a different pressure than cis-e. the nozzels are valved according to the dpr pressure, they are not interchangable. this is why they gave em different thread...
TURN THE AUTO CORRECT BACK ON, YOU NEED IT:laugh:
I suspect the unpluging of the temp sensor has nothing to do with it, the ecu is dumb, as in a more analog device than a computer.
do the tests at the ecu plug to test the input sensors, then do the...
even before I got hit in my rocco I was staring down every vehicle whos tragectory could cross mine, even then there will be a time when you just can't get away from one:banghead:
the wires are 20 gauge. the connectors are made by tyco / Amp. the connectors are called junior power timer. the contacts are crimped on the ends of the wires and can be removed from the connector...
I'm debating the same thing right now. I have a no sunroof scirocco 16v that got the drivers door caved in this spring. I can't find a door in descent shape to replace it with,, sciroccos are...
with a multimeter, ya missed something on the install or may have a bad fan motor
since you have the same fan in another car pull the wire of the motors and compare resistances across both motors....
hows the driving experience compare between the two?
what are the better message boards to start lurking on?
thanks for the reply,
I'm 5'11" on a good day and ride in the S2 with the seat pulled up a few inches from all the way back.
This is a third (4th,5th) car anyway so utility isn't as much an issue...
check your install.
I suspect you'll find a dead short and you bypassed/did not use a fuse.
sounds like a current issue.
does it do it if you turn the high beams on?
if there are no other ground gremlins, i'd suspect you have some windings shorted in the fan and drawing enough amps...
I've been kinda dreading this but I'm twisting in the wind about moving on from the Scirocco platform.
I really like it, but it's slowly rotting at the pinch seam, rubber body parts are dry rotting...