Type: Posts; User: Mr. Chan
I need the piece that connects the dash to a non AC air box - shown in pic. P/N 161 819 081 or 171 819 081
If the sale doesn't work out, I'll take it.
I could use the dash bezel including the HVAC panel and control assembly including levers and fan switch. Just let me know how much you would need shipped to 27518.
I'll take it. IM sent
1st place AA, but left early so I didn't get my plaque.
Slightly farther than you want(maybe 1.5 hours) , but Everything Euro in Winston Salem is really solid.
Will take it.
When I installed Corrado seats, rather than cutting the adjustment lever, I welded an additional tube to the other side of the slide bracket. If you compare the brackets on each side they are not...
Jeggs has an AN check valve that will fit directly into the booster.
Had the same issue with those wheels and some cheap coils. As Mr. Grizzle suggests; I had to pull the helper spring and run pretty far up and add 5mm spacers to clear the inside face of the lip. The...
Appreciate it. It was nice talking to you guys. Looking forward to seeing what you bring back to the market.
EDIT - Just realized that the picture of the ECU was already posted. I'll try to grab a couple more this weekend.
I decide I wanted to keep vacuum on the block so I deleted the VTA...
I had forgotten about the bottom. I removed it. Been about 4 years and no problems...
Don't know if the Jettas are different, but in my 80 Rabbit the fuse block fit fine flipped upside down.