Type: Posts; User: Jrrrrrrr
The OEM radiator for A/C-equipped cars should be fine unless you want to relocate the hose flanges for some reason.
For better cooling, ensure the condenser fins are clean (or remove entirely if...
Is there any way the hook-shaped slider tab that runs up the middle width of the CE2 fusebox got pushed back in? That will make it impossible to remove or reinstall any of the wiring plugs.
The system is really simple. The vertical adjustment screw for the headlight threads into a motor, which is driven by power from the lowbeam output (the motors aren't supposed to work with highbeams...
Inside the middle case of the 020, there's a small recess in the casting that the "dimple" or end of the speedometer cable gear rests in when installed. Its possible your transaxle has some foreign...
Do you have the simple, 2 wire-style reverse light switch, or the more complex one for cars with an upshift indicator?
The first thing I would do is check...
Doing a synchro conversion? 357201129B is the superseded part number, but might not help much.
This mount is tricky because the support bracket pass-through bolts that thread into the 5th gear housing are blocked for removal by the left frame rail. IIRC, I had to lower the whole engine and...
I haven't seen the 3-outlet non-oil cooler water pipe available in a long time. 027121065D is the one you want for 4x outlets, so you'll need a 19mm plug (055121324) to plug the oil cooler outlet if...
That 3-prong plug goes on the back of the A/C control head.
The R/W wire on that plug is what provides power to your HVAC blower switch, so the blower fan should not work at all with that 3-prong...
Still some good parts available, bump!
I agree it sounds like the lever, which locks the seat back in place and is actuated by the bowden cable from the plastic lever on the seat back, isn't moving properly. I would guess there's a piece...
Sounds like you're already doing just this, but since no one replies, I can confirm I've also did this before and it works fine.
Awesome, been wanting to find a source for something like this :thumbup:
Actually $1 for the pair before shipping. These guys have everything else one needs to rebuild a Bosch/Valeo alternator as well - down to the hardware.