Search Results - Vortex Media Group
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Search:

    Type: Posts; User: SB_GLI

    Page 1 of 13 1 2 3 4

    Search: Search took 0.33 seconds.

    1. I see from above now. Here's one thing you want...

      I see from above now. Here's one thing you want to check out. I had this problem in the past. The 225TT's came with two different MAFs, make sure you have the MAF from the wideband 225TT. The...
    2. What MAF are you using? It really appears as...

      What MAF are you using? It really appears as though the MAF calibration is the culprit.
    3. Base map is just that... a base. Like my...

      Base map is just that... a base. Like my previous response, you probably have a lot of work to do on the boost duty/pid tables to get your FT to boost correctly. The other issue you will find is...
    4. You probably need more DC to achieve the boost...

      You probably need more DC to achieve the boost you desire. WGDC is capped around 80%. You probably have a lot more work to do to get boost control close.

      Also, fuel goes pig rich after 4,500rpm...
    5. "Boost PID"

      "Boost PID"
    6. Replies
      153
      Views
      8,815

      Not gonna lie, this picture makes me sad. ...

      Not gonna lie, this picture makes me sad. You're taking the easy way out Bradley (which may turn out to be harder in the end).
    7. You shouldn't really be modifying KFLDLR (boost...

      You shouldn't really be modifying KFLDLR (boost duty map) all that much for a K03. Your k03 won't make boost until after 2,500rpm anyway, so this table likely has nothing to do with your issue.
      ...
    8. please? Looks good. You are leaving some spool...

      please?

      Looks good. You are leaving some spool up time on the table if you are using the n75 with that low WGDC during spool up, otherwise it looks badass.
    9. Thread: AWP Surging

      by SB_GLI
      Replies
      47
      Views
      1,709

      WTF do you mean this guy? unless you have a...

      WTF do you mean this guy? unless you have a seriously bad tune, a reflash to the same file won't do sh1t. Only if they made a revision to the flash would there be any effect. The flash is a binary...
    10. Replies
      20,210
      Views
      891,703

      probably came loose and then sheared later. ...

      probably came loose and then sheared later. likely wasn't torqued correctly by whomever did the repair the first time and the bolts came loose. ask your mechanic if he's familiar with a torque...
    11. Thread: AWP Surging

      by SB_GLI
      Replies
      47
      Views
      1,709

      No, not likely. Do you have VCDS and the...

      No, not likely.

      Do you have VCDS and the ability to log your car while the issue is persistent? Do you have these issues with part throttle?
    12. Thread: AWP Surging

      by SB_GLI
      Replies
      47
      Views
      1,709

      No. Just No. OP, do a boost leak test and fix...

      No. Just No.

      OP, do a boost leak test and fix any boost leaks.
    13. edit... wasn't supposed to be here

      edit... wasn't supposed to be here
    14. hmm, perhaps maestro is not logging the correct...

      hmm, perhaps maestro is not logging the correct memory location for timing correction factors on this binary. I'd verify by logging with it vcds. Something certainly isn't right based on what's...
    15. your ignition advance is very late. You are...

      your ignition advance is very late. You are leaving 10-12 degrees on the table at least.

      Are you using the correct map to adjust timing? Upload a screen shot of your timing map, and the vvt...
    16. Are you using a file specifically for the b6 a4? ...

      Are you using a file specifically for the b6 a4? those cars are returnless fuel system and you'd have lots of issues flashing a different binary.

      What are your actual ignition angles during a WOT...
    17. Replies
      153
      Views
      8,815

      what a nightmare job!

      what a nightmare job!
    18. pressure test for boost leaks. sounds pretty...

      pressure test for boost leaks. sounds pretty typical of that.
    19. Ha! Good luck with that. Ain't ever gonna...

      Ha! Good luck with that. Ain't ever gonna happen. Not sure Tapp would know how to do this... this isn't just a single map that needs to be re-scaled. Every reference to pressure in the entire...
    20. I'd be interested to see your logs to see how...

      I'd be interested to see your logs to see how it's coming along!
    Results 1 to 20 of 250
    Page 1 of 13 1 2 3 4