Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Search:

    Type: Posts; User: briano1234

    Page 1 of 13 1 2 3 4

    Search: Search took 0.64 seconds.

    1. Here ya go..........

      Here ya go....... http://www.instructables.com/id/Portable-12V-Air-Conditioner---Cheap-and-easy!/step1/Background-and-How-it-Works/



      :)


      I suppose you could get one of those old Beetle...
    2. The 82-89 pivots fit the 90-93, you have to...

      The 82-89 pivots fit the 90-93, you have to remove the entire frame assembly... The seals for the windows are like big bucks.
    3. Replies
      1
      Views
      120

      See Cabbyinfo.com

      See Cabbyinfo.com
    4. WB..........

      WB..........
    5. Buying a new a/c equipped is easier. New...

      Buying a new a/c equipped is easier.

      New heaterbox, evaporator, controls, a/c relay, A/C delete thread in reverse, oh, removal of the dash....
      Doable, but time and expensive.

      Compressor,...
    6. Replies
      3
      Views
      172

      No, if you can knock out the pin, as in Carefully...

      No, if you can knock out the pin, as in Carefully Drilling it or Grinding the rolled edge, then you can probably find a grade 10 bolt and lock nut.
      But if you can't then the frame is the fix. ...
    7. Replies
      3
      Views
      172

      That is the main frame hinge. You could try...

      That is the main frame hinge.
      You could try replacing that pin with a bolt, but I think it may be time for a new frame.
    8. Replies
      9
      Views
      324

      Low fuel pressure, then suspect the pumps....

      Low fuel pressure, then suspect the pumps.
      Running rich can be a bad o2 sensor, or the 5th injector leaking.

      90 hours and still no answer... that is too much time and I think he may not know what...
    9. Replies
      68
      Views
      5,232

      Thanks for bringing that up... :) Be-warned, it...

      Thanks for bringing that up... :) Be-warned, it wasn't a pretty fix..... New Crank needed because the Previous Owners BASTURD VW Mechanic screwed the pooch.

      I would of loved a sheared gear...
    10. Replies
      68
      Views
      5,232

      Set the time with aligning the marks and the...

      Set the time with aligning the marks and the belt.
      To tension the belt, I took a small steel long handled Allen, you can buy the specialty tool a spad wrench, but tighten it in a clockwise direction...
    11. Replies
      3
      Views
      201

      Paint the threads with Never-Seize, and use new...

      Paint the threads with Never-Seize, and use new crush washers for that type of hose. For the crush washers slightly sand them with fine grit paper 600 or 800, then hold them over an open flame and...
    12. Replies
      14
      Views
      480

      I know I Know I KNOW That was the best part of...

      I know I Know I KNOW That was the best part of Sesame Street...

      https://www.youtube.com/watch?v=TxfZbj5vf7Y
    13. Replies
      14
      Views
      480

      The dimple on the back side of the gear is EVEN...

      The dimple on the back side of the gear is EVEN not above, not below the level of the Valve cover tin. Not above the re-enforcement bar, but the valve cover tin below it.
      ...
    14. Replies
      14
      Views
      480

      RE-time it. Your cam mark has to be even with...

      RE-time it.

      Your cam mark has to be even with the top of the valve cover tin, and not the re-bar.
      Your cam pic looks to be above the re-bar.....
    15. Replies
      1,754
      Views
      119,880

      Unlike most, I drove it like I stole it.......

      Unlike most, I drove it like I stole it.... Topless and moving down Ga400.
    16. Replies
      9
      Views
      496

      Big Ditto's REALLY BIG DITTO's on the plugs. ...

      Big Ditto's REALLY BIG DITTO's on the plugs.

      Oh and make sure that your plug wires are fully seated on the plug and not arcing out on the head, spin them so the steel jacket lip is away from the...
    17. Replies
      83
      Views
      11,975

      Drove a Diesel rabbit off the showroom floor in...

      Drove a Diesel rabbit off the showroom floor in 80, basically for the 20 years I drove it, it was a cheap car, very few issues....
      Besides glow-plugs, yearly and vacuum pumps.

      Before I sold it...
    18. A heads up to those that buy the t-stat cover...

      A heads up to those that buy the t-stat cover from GAP.

      The second one I installed was really really sharp on the machined edges, so much so that I used a little crocus cloth to smooth out the...
    19. Replies
      1
      Views
      145

      Yes, plugging in the MAF can blow the MAF up, and...

      Yes, plugging in the MAF can blow the MAF up, and or the ECU...I have seen that before.

      You may just need to allow the system to reset.. that is what is called the chicken dance...
      You will also...
    20. Jbugs is also good for that as I needed the...

      Jbugs is also good for that as I needed the Bright white, and they only showed the white or Ivory at the time.

      Your welcome.
    Results 1 to 20 of 250
    Page 1 of 13 1 2 3 4