Still looking for one.
Type: Posts; User: Jo|\|
Still looking for one.
If you are going to keep the stock intake manifold you should keep the shifter rod. There is a huge drop in power if you don't use it.
Heatsoak maybe? The runs were only 3min apart.
That's how the stock PCV works. The problem with vacuum is there is no vacuum if you're in boost, assuming your source is after the throttle body.
It's either run a hose from the valve cover to...
I say we just raid the car when he isn't looking. You take the head, I'll grab the catch can and intake manifold. :laugh::laugh:
Exactly what Charles said. There has to be a vent somewhere.
You could get a MK5 3.2L valve cover and make a catch can setup that covers the ABS pump.
You can see what the valve cover looks...
You have a PM.
Buying the real cable would be a good start.
Only looking at the maintenance on the front half of the cars its roughly 90% the same. The major difference being larger rotors and brake pads on the R32. Tie rods, balls joints, motor mounts,...
I need a R32 front bumper. It's getting plasti dipped so it just needs to be in good shape, I don't car about the color.
I can help with the engine, but not the accessories. http://forums.vwvortex.com/showthread.php?7038309-FS-2-8L-24v-VR6
$1k was just a starting number, I'm willing to take off a pretty good chunk...
If you want to go even cheaper you can get Gates K060560. It is a single sided belt, but the only accessory that needs ribs on the back side is the AC. I ran it for several months and the AC never...
MK3 "guide piece" - 1H0823493
It's not a direct fit but the 0A6 from a TTRS is supposed to be top of the 02M/02Q family . It only comes comes with the 4/5 cylinder bell housing though, so it will need some custom work done to...
Not any more. The supercharger was sold last month.
Yep. It's just sitting around.
It looks like the passenger strut isn't seated all the way into the spindle. Try to feel is there is a difference in how far the strut is inserted. You should be able to feel it from the bottom just...
No. Not enough offset or sidewall flex is what will cause the tire to rub.
The strut, spindle and wheel are all solidly linked together. If you were to move the upper bushing the wheel will move...