My $500 Quattro:
Type: Posts; User: MikkiJayne
My $500 Quattro:
I'd say its pad material pickup on the rotor surface - I had pretty much the exact same problem on my A6 last year. It seems to be caused by holding the brakes on when the rotors are really hot, say...
Hang on... is that a fake XXR :confused:
I think the odds of drowning are fairly minimal when compared with the effects of hitting water at 260 mph! These guys are seriously nuts, and yeah the way they corner just boggles the mind.
Peugeot / Citroen electric pump?
Mounted mine in the passenger footwell
Hmm I can't say for the 4 speeds, but the 5-speeds (B5, C5, D2) have the same multiple fitment that the manuals do.
H982FKL really is a 1990 Porsche 928 though, so thats one hell of a coincidence if they just happened to find it for an Argentina special. Makes you wonder if someone found that particular car by...
Its not dead - far from it. Just a little crispy :P It's been rebuilt, blown up, and being rebuilt again since then!
LS1 in an RS6 with twin remote...
They look the same profile from the two pictures in the first post. Are they different widths? :confused:
I always replace those crank pulley bolts the first time I do a belt on something. They're pennies from the dealer so its not worth putting the rusty ones back in since once they're that bad you'll...
Ok so DVX has the 90mm diff (the larger one), and 108mm CV flanges. What CVs does the Boxster have?
Getting the flanges out is easy yeah. A slide hammer will pop them out no problem, or even a couple of prybars. But, there are different splines on different sized flanges so not all of them just...
All the FWD B4 Audi 80, B5 A4 and B5 / 5.5 Passat models use the 012, with various different ratio sets and output flanges. There are a couple of different splines used for the flanges so its not...
Are they bolted in place? They have to be in the right orientation for the belt to come out :)
That UK licence plate is from a 1997 Toyota Camry 3.0. Very clever :cool:
Definitely! :thumbup: Especially if it has proper brakes :D
Was the hill open too? Damn I wish I could have made it to that :facepalm: Next year!! :thumbup: