Type: Posts; User: la macchina
While at the junk yard working on my other problem, I picked up the pigtails from an A6 that takes this ICM. Might try at some point. Anyone else here ever tried it or know anything about it?
So in the end it was the coil itself. Thought I had ruled that out by continuity but whatever. Have had a ford coil conversion in there so I found one at the junkyard and away we go. That of course...
No codes shown. Not too much of a surprise since the CEL wasn't on. Not sure if a dead ECU would show that or not, my first time doing this thing. Anyone have any ideas?
Isn't so much about gains as it is a more about having an easier to source/less expensive ICM.
no, just using the left side diagram. Only using one ICM.
had a thought and wasn't sure if this would work. I figure someone here would be able to say yay or nay.
So the question is if an ICM from an audi A6 would be able to be used on a VR6. connection...
I installed it and it has been working great for the last couple months. Running well and got rid of the SAI code and let me pass emissions:laugh:
Will try scanning tonight.
Forgot to mention, a couple months ago I put in a C2 race chip. Not sure if that could be the culprit but figured I would mention it.
Soooo. On my way home from Christmas, driving down the interstate and all the sudden loose power. No noise, or anything. Pulled over and discovered the cat was glowing. It had been smelling the egg...
Need some help here. In the interest of time my wife convinced me to have someone put on all the parts I have been gathering, ball joints, control arm bushings, brakes, brake lines and wheel...
Looking for a set, new or used should be part 55.10.49
Let me know Thanks!
Anyone have a set in good working condition they are wanting to move out of their way? This is for a 97 passat wagon.
Anyone have a set in good working condition they are wanting to move out of their way?
Anyone got any info on this? After more searching I did find someone who said they had drilled out the lower shock mount. ?
Shock and strut question really, I guess. Getting ready to tackle my brakes and suspension in one swoop. Was fixing to put on some neuspeed sport springs with a .75" drop. My question is, would the...