Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Search:

    Type: Posts; User: gli87jetta

    Page 1 of 13 1 2 3 4

    Search: Search took 0.93 seconds.

    1. Cool. I'll look into doing that before I pull my...

      Cool. I'll look into doing that before I pull my next set of logs.
    2. SB_GLI, Thanks again for taking another look at...

      SB_GLI, Thanks again for taking another look at my logs. I finally opened one of the logs in Excel and I see what you're saying about airflow. I almost hit 150 on a couple pulls when I hit 6,000RPM....
    3. Good to know SB_GLI. If I went ahead and bought...

      Good to know SB_GLI. If I went ahead and bought the injectors would I be able to run them fine with my APR tune until I get the MAF and programming done?

      Also, I managed to pull some really good...
    4. SB_GLI, cool/cool. That's good to know I can...

      SB_GLI, cool/cool. That's good to know I can stick with my stock pump and just get a new fuel filter in addition to the MAF,etc! That gives me much more incentive to get a custom tune done! I'm...
    5. SB_GLI, appreciate the feedback. Yeah, I could...

      SB_GLI, appreciate the feedback.

      Yeah, I could hit WOT if I go out really late or find a different area to do my pulls. I think I was pretty close to WOT on the these pulls.

      Thanks for the...
    6. I'm at 5,400 feet where I'm logging. I was close...

      I'm at 5,400 feet where I'm logging. I was close to WOT but might of been a little shy. That's why I'm thinking we should add in a throttle position value when logging. What do you think?
      I'll try...
    7. After going on another drive today I do seem to...

      After going on another drive today I do seem to be down a little on boost. In sixth gear on the hwy at WOT I was pulling a steady 14-15psi. I think it should've been a little higher for where I have...
    8. To be fair I might not of completely hit WOT when...

      To be fair I might not of completely hit WOT when doing these pulls. We might want to add in a Thottle position value to check this? However, prior to having a new manifold installed the TIP never...
    9. Hi groggory, I went out tonight when it was a...

      Hi groggory, I went out tonight when it was a little later hoping I could find a decent strip of tarmac to do some logs but their were still quite a few people out so it was very difficult. I did...
    10. Alec's, Appreciate the feedback on your F21...

      Alec's, Appreciate the feedback on your F21 experience with the stock fuel pump. I'm not trying to turn this into an F21 Unitronic tuning thread but this is what I was told by a trusted mechanic...
    11. APR Tuning with Frankenturbo F21 (1st Gen) Setup: Air–fuel ratio (Lean or Rich)

      I'm starting this thread to do some datalogging with my current Frankenturbo F21 (Gen 1) to show what type of fuel ratio you might expect with a full APR load and some mods.

      Here's my current...
    12. Yeah, I feel pretty lame for not attempting this...

      Yeah, I feel pretty lame for not attempting this myself. Meh, I've been stressed out from starting a new job so that's my excuse. :P
    13. Appreciate that. I'm sure I could've handled this...

      Appreciate that. I'm sure I could've handled this one myself but just wanted it fixed. It would've been nice to save $63 thou.. :laugh:
      I'll hit you or the Rocky Mountain forums next time I'm having...
    14. Good call groggory! It turned out to just be the...

      Good call groggory! It turned out to just be the o-ring that needed replaced! It ended up only costing $67 for my repairs so it was nice to save a little. I'm pretty sure that would've been really...
    15. Maxpowerz, Thanks for the suggestion. However,...

      Maxpowerz, Thanks for the suggestion. However, I've decided to just have the shop do this repair.

      After calling a few other shops I realized their price of $210 is reasonable. I want to finally...
    16. Thanks for this info. The shop that quoted me...

      Thanks for this info. The shop that quoted me $392 for the thermostat quoted me $210 for parts and Labor to do the coolant flange. Seems a little expensive to me so I might call a few more shops.
      ...
    17. Leaking coolant flange. Cost for repairs?

      I've had this leak for about the last 3 months now. It's getting worse and I have to top it off once or twice a week now. Here's a few pictures of my leak.
      ...
    18. Hey Doug, the tech got it done and I picked up my...

      Hey Doug, the tech got it done and I picked up my car today. I was informed by my adviser today that the tech is VW certified. The maintenance ended up costing me twice as much as originally expected...
    19. I'm hoping to get my car back tomorrow but not...

      I'm hoping to get my car back tomorrow but not sure? I got an update from my Service adviser informing me the tech "Had some fighting with the hardware!". I know Doug mentioned those tabs can be...
    20. My APR I used to have fit really good.

      My APR I used to have fit really good.
    Results 1 to 20 of 250
    Page 1 of 13 1 2 3 4