Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Search:

    Type: Posts; User: Sinner44

    Page 1 of 13 1 2 3 4

    Search: Search took 0.69 seconds.

    1. I agree the brass in there is definitely a weak...

      I agree the brass in there is definitely a weak point for sure, but on a grad student budget, they're not in the cards http://e.tinytex.com/g/032.gif
    2. Got everything out....So this was definitely the...

      Got everything out....So this was definitely the issue one of the rivets snapped on the selector fork, so those will be replaced with bolts and welded. I don't have the coin to but the steal shift...
    3. figured that bit out for the most part, i just...

      figured that bit out for the most part, i just have to figure out how to remove the gear clusters.
    4. Any ideas on how to remove the shift tower? It...

      Any ideas on how to remove the shift tower? It looks like it's being held in be the flange at the bottom that has the 3 bolts in it. I removed the bolts, but I cant seem to get the flange out from...
    5. Yeah could be. Luckily I have a spare o2m with...

      Yeah could be. Luckily I have a spare o2m with good transmission forks. Hopefully that's the issue
    6. No the clutch wasn't removed. With it not...

      No the clutch wasn't removed.

      With it not rolling in what should be neutral and rolling only in first when the clutch is depressed (wont roll in any other gear neutral included if clutch is or is...
    7. no luck there either. I'm thinking I bought a bum...

      no luck there either. I'm thinking I bought a bum transmission... I'm in the process of removing it now to check it out.
    8. I've attempted to realign a few times and no...

      I've attempted to realign a few times and no luck. I've cycled through the gears manually via the transmission to try and find neutral with no luck. The only time I can get the car to roll back is...
    9. Car wont roll in neutral only rolls when clutch is depressed.

      So I just had to swap out my O2M because the old one had a hole in the casing (bolts sheared and the axle slammed into the casing). Anyways the new transmission is in the car, shifter aligned, the...
    10. Replies
      7
      Views
      456

      Messaged

      Messaged
    11. Thanks again! Unfortunately, both specialized and...

      Thanks again! Unfortunately, both specialized and german parts warehouse are the same company/share the same inventory and they did not have either a VR or 1.8t 6-speed. I'll keep looking around...
    12. Thank you for the help! I don't mind driving to...

      Thank you for the help! I don't mind driving to find one, so if you may know of other dismantlers in the area I am open to suggestions!

      I wont know the extent of the damage until I tow it back up...
    13. Yards / Parts / Advice...Looking for an 02M

      Hey Guys

      I moved to Sac a few months ago from Reno and haven't had time to drop in and say Hi. Anyways I had an axel on my 1.8t go and it slammed into the transmission cracking the casing. I...
    14. Replies
      3,298
      Views
      2,193,168

      If you dont mind me asking, what type of water...

      If you dont mind me asking, what type of water pump setup did you move to?
    15. Replies
      34
      Views
      4,130

      after you check the dwell and all wiring looks...

      after you check the dwell and all wiring looks good, it may help to switch to a different coil like the MSD Blaster 3. They're only about $30 or so. I'm not sure if that would be your ideal fix....
    16. Replies
      73
      Views
      2,437

      Depends on the width range the calipers were...

      Depends on the width range the calipers were manufactured for. What are the details on the caliper. Brand, part #, and etc. if you have it.
    17. Sorry for the late reply. I do not recommend...

      Sorry for the late reply.

      I do not recommend the Poly Bushings, they are too stiff and do not allow for proper suspension travel relating to control arm droop and so forth. If you're looking for...
    18. Replies
      13
      Views
      1,195

      Absolutely...Shooting for the end of summer as...

      Absolutely...Shooting for the end of summer as long as the finances stay in line hahaha
    19. Replies
      13
      Views
      1,195

      Bump for a rad seller. Very nice guy always easy...

      Bump for a rad seller. Very nice guy always easy to get in contact with, very helpful, and sells great stuff. Got the turbo today and it's fantastic. Highly recommend this seller.

      Thanks again...
    20. Replies
      2
      Views
      158

      Ill take it mine is dying send a Paypal invoice...

      Ill take it mine is dying send a Paypal invoice to entanglednchaos@gmail.com and ill send cash ASAP
    Results 1 to 20 of 250
    Page 1 of 13 1 2 3 4