Type: Posts; User: mk2golf14s
im mainly interested in trading for nice mk2 or slc corrado.
Springs have about 3000miles on them. They will work in mk4 heads as well. I paid 400. Selling for 300 shipped.
Selling a set of used ( about 3000 miles) scat h-beam rods.
Up for sale is a nice set of je pistons. I bought them used for my aba. I decided to change projects. The pistons had 20,000 miles on them according to the previous owner. I had them cleaned at a...
Used arp head studs for sale
Has about 3000 miles on it. I'm going in a different direction with my car. Great cam for fi. 120 shipped
Anyone on here have a 300m input shaft for a 010 that they want to sell? Needs to fit a jetta or golf transmission (not vanagon 010)
Thanks guys. I think it solved my problem.
I was hoping it was non inverted because it seemed to run a bit smoother. I initially thought it should be inverted because it idled higher. That was probably just because it had...
I'm running an aba coil. Should it be inverted or not?
I wired the vr sensor backwards and set signal to inverted. It doesn't break up as badly at 4000rpms but it has a consistant miss that gets worse as the rpms go up. The rpm signal stopped bouncing...
I did swap the distributor for the 4 window one. Not sure on the board version, but I'm pretty sure its different than all the rest. As far as jumpers go, the ems pro has all of the features built in...
I'm running off the 60-2 crank wheel on my aba. Whenever the rpms get to 4000 rpms the signal goes crazy, bouncing from 4000-6000rpms. I've put a 10k resistor in line with the signal and that just...
i would say a t25 would work just fine for your goals. should have a pretty quick spool up. prob 12psi by 2800.:thumbup: