Type: Posts; User: ArsenicPants
I did the same conversion on my jetta, and just put the rubber accordion plugs back in from the adjusters. it's not perfect, but it's better than a big gaping hole. i've just been on the lookout for...
I drove a turbodiesel jetta for a long time and wasn't able to go over 100ish km/h, which us about 60 mph. I never figured out what the problem was. I cranked up the fuel mixture, ran it off a...
Aaah, ok. Ya, I guess the plenum IS a little bigger. Do you have any numbers to show that it's a better manifold?
I guess the idea is slightly higher horsepower with a little less torque at higher...
Can you tell me more about the modified intake manifold? It looks like it has the same dimensions as a standard euro 16v intake; same runner length, same plenum size. Or am I wrong?
Behind the arches, under the flares. In the trunk. Look underneath in Evert area you can see. Rust also appears inside the passenger side fenders, along the inside of the wheel wells, where the smog...
Warm up regulator could be clogged, too. You can take them apart and clean out the fuel inlet screen if you want
Scirocco hatch strut?
Your fan switch sensor in the radiator is broken, or you have a bad ground.
THERE IS NO REASON TO ADD AN EXTRA MANUAL DASH SWITCH FOR THE RAD FAN
all you're asking for is trouble. It's a dead...
The emblem on the jetta euro grille is the same as the NA one, as well as the rabbit for all years, and small bumpered cabriolets
Thanks for the link, though
if there's anything I can say about it though, is that you should make it CIS basic. IE, no computer or oxygen sensor.
The early mk1s, at least in Canada and Europe, all came with this...
The FF/FN has the tallest 5th gear
Mmmmm turbo carbs... Yum.
Good luck! Your carbs are at least easy to tune
Looks great so far
E21 pfeba spoiler. You'll find most BMW e21 and e30 spoilers will fit jettas
The original blue vinyl seats, since I've never seen another jetta stock with an all blue vinyl interior
I'm holding out for original vinyl e21 recaros.
I work for Greens
I have one of your wheels in my living room
We messed up with the CNC lathe on one of them, and cut too much out of the lip
So I gave up one of my own wheels to replace it, haha....
Ya, the spare tire well is shallower on the later cars
You can weld in the newer style well if you want
If you want a stock look, anyway
Otherwise, if you want a gigantic tank, I'd just cut out...