I'm in Chicago in the "Andersonville" neighborhood (Foster & Broadway). I have the USB HEX-CAN.
Quote, originally posted by spockcat » This would be an interesting use for FRAPPR.
I thought so too when I created the map a few weeks ago.
So I know there are tons of folks listed on this thread as well as on the steve hall list but I thought the frappr map would help out the folks who are geographically challenged (like me). So if you have one and are willing to help out other dubbers or audi owners, please put yourself on the map and don't forget to include contact info via your shout out.
Noticed lots of folks on here and I'm hoping you all will also put yourself on the Frappr Map.
I created this map because I found that lots of the folks in my area that were on the steve hall database either no longer had the tool or were somewhat unwilling to help out.
So please put yourself on the map, and be sure to include contact info so that folks can get in touch with you. Thanks much.[
Modified by 00Psst at 3:44 PM 12-1-2005
Modified by 00Psst at 3:46 PM 12-1-2005
Modified by 00Psst at 2:52 PM 12-2-2005
2003 MK4 Coil-over suspension, Camber plates, Shine Racing rear swaybar, 3"TB Forced-motion exhaust, APR 91, 100 race, S3 strut bar, Baily DV, Modified Factory Airbox, VF engineering Motor mounts, TT front Brakes, H2Sport Control arms.
1991 MK2 GTI with VR6 Conversion with a Vortec Super Charger, Bilstein Sport Suspension, 5 lug conversion, big brakes, Liguid to Air intercooler still a project car
Quote, originally posted by foxmp9 » hi sebastian my name is dawood from south africa. did you read my mail i sent yesterday about my 2005 t5 caravelle i mailed faults also
You send 3 mails now, 1 to the VAG-COM group, 2 to me personally and now this.
PLease remember today is sunday, NOT a working day.
Quote, originally posted by stretch05 » im also in portland, looking for someone with the vag-com. do you know anybody in the area with one?
Rain Closing Windows, goF raeR, Aspherical Mirrors, Remote Windows, Amber Club
Quote, originally posted by 2000 VW Jetta VR6 » I am looking for someone in Little Rock Arkansas that can clear my airbag code as well I blew a fuse touch a wire ands airbag light popped on please help me out.
Someone correct me if I'm wrong, you cannot clear Airbag codes with a VagCom. You *probably need a new airbag controller.
Edit this is also NOT the thread to ask in
Oh and Win Man Can, HEX USB CAN, iirc or the expensive one
Modified by Ferris Buehler at 10:10 PM 5-22-2006
Quote, originally posted by Ferris Buehler » Someone correct me if I'm wrong, you cannot clear Airbag codes with a VagCom. You *probably need a new airbag controller.
VAG-COM clears airbag codes fine when the actual problems are fixed, but there are some exceptions (e.g. broken control modules and stored crash data).
Hardware (KEY-COM) on order.
I saved the dealer charge by using a "Generic OBDll" scan and re-set of the MIL (Check Engine). But I am not convinced that the code "too lean, bank 1" was correct. The MIL has not re-lit and the engine is running super nice!
The way I figure it, I already saved the cost of buying the VAG-COM by not having to go to the VW Dealer. The last time I had a MIL, the dealer charge was $150.00 to clean the throttle body, perform a "TBA" and clear the MIL. That was April 2003.
Modified by Sisyphus at 11:39 AM 6-10-2006