whoa.... ...that is one sharp looking race wabbit...good job! [IMG]http://**********************/smile/emthup.gif[/IMG]
well have you been using the multi layer steel headgasket & sprayed it with permatex copper sealant on both sides?? works great & I also use ARP undercut studs.Unfortunately this requires the use of 115 octane race gas ,& a diesel starter doesn't hurt either. [IMG]http://**********************/smile/emthup.gif[/IMG]
Do you run a sleave/coilover kit on a stock type strut?
I've read on here that some race shop has a set up thats 1/3 cheaper
than than the ground control sleave kit.
S.S. rules say "stock suspention" but all the mustangs have
spring jacks so this would be allowed for strut cars as this is the only
way we can have ajustable spring height.
You can use any Coil over Kit, I have a set on my street rabbit off of Ebay. But for my race car We take the shock cans and cut the perch off, and then slide the adjusters where they sit on top of the Spindle mounts, for springs we use 12" coils all different spring rates, combined with Bilstein shocks. Cutting the perch off and using this method will lower your car to about 2.5" to 3" at the frame rail from the ground, this is as low as you can go with a VW that I have seen. For your stock class they may not allow this but for mini stocks they do. Hope this helps!
Yes it is true. The only car I saw with Injection was a RX-7 Mini Stock from a few years ago, that went ahead and tried it. It made that Mazda SUPER fast, way faster than a Carb. Fuel injection wouldn't work that great on aur motors once they are all "souped up" but I am sure we will see more.
if i remember correctly the toyota camry that was behind you the whole race
well enough said about that.i will give you a thumbs up for holdin yer
position. GIT ER DONE!!
#40 rocks [IMG]http://**********************/smile/emthup.gif[/IMG]
The silver rocco isn't mine anymore.It was claimed 2 years ago.I stoped building Bee's when the Mains went from 30 to 15 laps.
I'll have a Rabbit in mini-stocks as soon as I get some calipers and tires on it.
oops,did I say tires? ...I meant to say tars.
Modified by AggroDriver at 9:07 AM 7-20-2005
I just got done having my number changed from #16 to #20.More appropriate for the paint job;don't you think??? (lmao).Also my motor is almost done.Will post new side pics when I get a chance.Found a bad tie rod end,wheel bearing & strut all on the RF corner.More work to do! I love this bumper sticker I found & promptly placed it in the back window of my "tow van" :
DRIVER CARRIES NO CASH;HE OWNS A STOCK CAR
Not much work done on the Mk3;the Mk2 is taking up all my time right now.
Hey aggrodriver;how about some pics of your new race wabbit???
I say we ought to post pics of our trusty race tow vehicles as well.OK here is mine:
It's been towning my v-dubs to the speedway since 1999 w/o hassle.Gotta love the big 3.8L V6 power!
Here are a few other pics of my tow vehicle I'd like to share;done by my friends:
I like the last one the best.....
OK now let's see yours!
Here is my awesome ministock
cool video of a victory
2.0 aba block with a german 85 head solid lifters ported and polished head. huge cam, bareley itles at all.
Modified by MK123GTi at 5:00 PM 8-7-2005
Quote, originally posted by junkyardjockey » Hey aggrodriver;how about some pics of your new race wabbit???
Its actually pretty old.Its a 75 swallow tail and hasn't been raced for
around 10 years. Practice/shakedown next thurs. [IMG]http://**********************/smile/emthup.gif[/IMG]
whoa....very nice vw racer you got there....congrats on the victory...is that a golf or a wabbit you have??..wicked cool video too [IMG]http://**********************/smile/emthup.gif[/IMG]
This is my 88 Scirocco II 2.0 Block 1.8 head TT Header AUTOTECH Fuel Enrichment, Valve Springs and Titanium Retainers, Schrick Cams, Kent Cams Adjustable Pulley, Flywheel from BahnBrenner, 50mm Polished EURO Intake Suspension by SHINE RACING Diamond Rims, Tires: Kumho 710's or Hoosier R3S04's
We race at Adirondack International Speedway http://www.AISpeedway.com
Modified by 16VAdirondackracer#1 at 10:14 PM 8-22-2005
Modified by 16VAdirondackracer#1 at 10:21 PM 8-22-2005
Modified by 16VAdirondackracer#1 at 10:30 PM 8-22-2005
Heres my car. I race at Jackson Prairie Speedway in Chehalis Wa. Practically grew up at south sound but couldn't bring myself to race bumblebees...so went dirt track racin.
Modified by 16racer at 6:34 PM 10-15-2007
wow..... ...a jetta coupe....way cool...and he uses my old number too....car looks great!!! thanks for sharing the pic!! so how did you do with that this year??? any tips or secrets u wanna share??
No good secrets here...I'm still looking for some myself. Only got a few races in this year, and didn't do too bad. Should be racin for some wins next year. I knew I wanted vw and saw this coupe on the side of the road and the price was right, and turned out I went to high school with the guy sellin it.