Fresno Vee Dubs pt 2

[the4ork]

oh, and i just bought killa's wet nitrous kit for $375, since i'll be running standalone and all

[Issam Abed]

Quote, originally posted by the4ork »

stageIc here i come, unfortinately paypal is not working at this second

Sweetness!
lets get rocking!

[the4ork]

you'll have to take a weekend and stop by fresno when i get back this summer to see this beast. i have nothing better to do than work on this car besides get my cabby to run again. but who cares, its auto

[2manvr6]

Quote, originally posted by the4ork »

anywho, that standalone is one of the last items i needed to get my car up and about, so when i get back it should only be a short time before im ripping simon a new tailpipe, and i'll be living at the lemoore runway

yea standalone, nitrous, turbo, u need all that to beat a NA vr6

my car still has a vacuum leak somewhere, it idles like a cammed v8, but it still runs good when its not idling. at WOT its nice, but still feels a lil weak. hopefully i can get my car runnin normal again by the time your car is going ricky.

GTG this weekend? how bout saturday? name a place and a time, ill be there.

[Issam Abed]

Quote, originally posted by 2manvr6 »

yea standalone, nitrous, turbo, u need all that to beat a NA vr6

Get real Pal....
300+ > 172HP VR6

[PulsiveDub]

Quote, originally posted by Wizard-of-OD »

Get real Pal.... 300+ > 172HP VR6

whoa buddy... keep it on the barbados forum aight?

[Issam Abed]

Quote, originally posted by PulsiveDub »

whoa buddy... keep it on the barbados forum aight?

Shut up...

[PulsiveDub]

Quote, originally posted by Wizard-of-OD »

Shut up...

oh thats right, there is no BARBADOS FORUM
...Fresno is no where near Barbados...

[toast_]

Quote, originally posted by Wizard-of-OD »

Get real Pal.... 300+ > 172HP VR6

*cough* around 270 for vr6*cough*

(at least for mine)


Modified by toast_ at 12:06 AM 12-3-2004

[ItsDchz]

Is it your BMP R32 I see on Shaw in Fresno quite a bit?

[ItsDchz]

Check out the VW DERBY we spotted at the Elbow Room!

http://forums.vwvortex.com/zerothread?id=1713129

[toast_]

Quote, originally posted by ItsDchz »

Is it your BMP R32 I see on Shaw in Fresno quite a bit?

Maybe... I'm up there sometimes on the weekend...

If the windows are tinted like this and the plate reads "04VWR32" then yeah.. that's me.

[the4ork]

i want a run at those 270 horses.... and i wanna run against one of those new stangs that everyone seems to think are soo cool

[Issam Abed]

Quote, originally posted by the4ork »

i want a run at those 270 horses.... and i wanna run against one of those new stangs that everyone seems to think are soo cool

270 horses possible....
run against new stands your going to need more valves buddy

[the4ork]

yeah i want to do a 24v swap, and put this 8v in the cabby

[gtiownerskid]

Quote, originally posted by toast_ »

*cough* around 270 for vr6*cough* (at least for mine) Modified by toast_ at 12:06 AM 12-3-2004

270 horses??

... you sure bout that?

if you havent changed anything since that night where we were playing around on the freeway, that means my 180whp is keeping up with your 270 flywheel hp.

[PulsiveDub]

oh man I just can't WAIT untill I join in on the fun...

[svwgtivr6]

nice car.. so your going to join the Fresno dub crowd?

and how come no one wanted to run the jetta when she was charged?
i think i was a bit better then 270

[PulsiveDub]

Quote, originally posted by svwgtivr6 »

nice car.. so your going to join the Fresno dub crowd? and how come no one wanted to run the jetta when she was charged? i think i was a bit better then 270

I've been around for a while actually... not like simon, paul or brice... but i've been around... my other s/n's include ricksta777 and gtiblackonblack

I'm in the navy on a 6 month deployment overseas, returning in December

[Issam Abed]

Quote, originally posted by PulsiveDub »

oh man I just can't WAIT untill I join in on the fun...

GBB...What engine is this car getting?

[PulsiveDub]

well I just bought a new ABA bottom end with 8.5:1 CR pistions from JE, the block it's self was custom built from JRC and I happened to get a hold of it for 900$, it has the forged pistons 8.5:1, oil squirters, and everything needed for a good turbo set up.. the guy ran it with 4k that was it... I haven't recieved it yet, but I hope I don't get ripped off on it...
I am gonna go with a 16v head, p&p'ed, bigger valves, 3 angle valve job, custom cams, and the block already has ARP studs

Of course I will get 034 in due time here.... the engine is a 1st come deal... and I am also looking into a 6 speed 02a currently...

fast times for me!

[Issam Abed]

Quote, originally posted by PulsiveDub »

well I just bought a new ABA bottom end with 8.5:1 CR pistions from JE, the block it's self was custom built from JRC and I happened to get a hold of it for 900$, it has the forged pistons 8.5:1, oil squirters, and everything needed for a good turbo set up.. the guy ran it with 4k that was it... I haven't recieved it yet, but I hope I don't get ripped off on it... I am gonna go with a 16v head, p&p'ed, bigger valves, 3 angle valve job, custom cams, and the block already has ARP studs Of course I will get 034 in due time here.... the engine is a 1st come deal... and I am also looking into a 6 speed 02a currently... fast times for me!

No worries dude
Rodney Huss is great!
Just make sure J-man knows

[psyclobe2]

Whats up yo. Don't know if all of you have seen the wonderful work Bryce did on the wagon, so here's a pic:

-Jason

[PulsiveDub]

Quote, originally posted by Wizard-of-OD »

No worries dude Rodney Huss is great! Just make sure J-man knows

who si Rodney Huss? is that JRC? and J-man as in Jarman?

[Issam Abed]

Quote, originally posted by PulsiveDub »

who si Rodney Huss? is that JRC? and J-man as in Jarman?

JRC motorsports = Rodney Huss
J Man = Javad

[svwgtivr6]

Quote, originally posted by psyclobe2 »

Whats up yo. Don't know if all of you have seen the wonderful work Bryce did on the wagon, so here's a pic: -Jason

nice car jason, ive seen your car at kw.. nice. bryce did a nice job. i might have to send him my car. did he paint the whole car. i remember the car being that color. could be wrong.

[svwgtivr6]

Quote, originally posted by PulsiveDub »

I've been around for a while actually... not like simon, paul or brice... but i've been around... my other s/n's include ricksta777 and gtiblackonblack I'm in the navy on a 6 month deployment overseas, returning in December

oh alright, ive seen the sn gtiblackonblack..and i remember when bryce bought the wagon from my friend. and when pauls jetta was all stock. hehe. me and ron were rollin twin gti vr6 in 99' good times, good times.

[Luckyzeee]

When was my car stock?????????haha

Wow, that was a long time ago

[psyclobe2]

Hey bryce, email me: jason.dictos at gmail.com. I need some paint work, and I lost yer #

[the4ork]

Quote, originally posted by Luckyzeee »

When was my car stock?????????haha Wow, that was a long time ago

when did my car run????????

wow, that was a long time ago

[2deepn2dubs]

Quote, originally posted by psyclobe2 »

Whats up yo. Don't know if all of you have seen the wonderful work Bryce did on the wagon, so here's a pic: -Jason

Thanks!
FYI I just painted the body kit.

[surfacant]

Quote, originally posted by PulsiveDub »

well I just bought a new ABA bottom end with 8.5:1 CR pistions from JE, the block it's self was custom built from JRC and I happened to get a hold of it for 900$, it has the forged pistons 8.5:1, oil squirters, and everything needed for a good turbo set up.. the guy ran it with 4k that was it... I haven't recieved it yet, but I hope I don't get ripped off on it... I am gonna go with a 16v head, p&p'ed, bigger valves, 3 angle valve job, custom cams, and the block already has ARP studs Of course I will get 034 in due time here.... the engine is a 1st come deal... and I am also looking into a 6 speed 02a currently... fast times for me!

hope you dont plan on trying to run those custom JE 8.5:1 pistons in an aba block with a 16v head, youd have like 6.5:1 compression

[gtiownerskid]

Quote, originally posted by surfacant »

hope you dont plan on trying to run those custom JE 8.5:1 pistons in an aba block with a 16v head, youd have like 6.5:1 compression

sing it with me now:

how low, can you go.... how low, can you go...!

[svwgtivr6]

Quote, originally posted by Luckyzeee »

When was my car stock?????????haha Wow, that was a long time ago

well not completely stock. you had M3 rv mirrors.

[svwgtivr6]

Quote, originally posted by 2deepn2dubs »

Thanks! FYI I just painted the body kit.

looks good though. how much would you charge me to fix the butt crack on the roof of my car?