what size injectors were used on original 16v-G60 from vwms, also is BBM chip just a copy of vwms one?
BBM has 16v Ltd. goodies on the shelf...
It has been some time since we have had these parts in stock!
Pretty sure you wont see the BBM Ltd integration for some time...if ever again.
Thanks guys and gals for your business and support.
which chip you are recomended? (bar-tek...bbm ?which is better to my setup)
i`m building engine based on 9A bottom and top
G-lader wheel -standard
i don`t want it to be a racer car..just smooth powerful ride from which i expect about 210hp
what chip you have -what setup + dyno might help me
thanks in advance
Last edited by gti1977; 01-12-2012 at 05:17 PM.
Well, I've got the inital break-in done of the engine and charger rebuild.
How about some number comparisons for a couple things?
Boost numbers for stock 78mm pulley and ported head? I'm only around 5-6 psi... about right for the increased head volume? I'm thinking I might have a slight boost leak. At the 1500 mile point I'll change to my 68mm pulley and I'm hoping for a good increase there. Then I'll go for my dyno and see what we're seeing at the wheels. Definitely is more fun than the stage1 g60.
Vacuum? I'm pulling about 15mmHg at idle about 20mmHg under engine break. Seem about right?
Oil pressure? Mine seems good... at 180 degF oil temp I have 1bar at idle and about 2.5 bar at 2000rpm. Certainly better than my PG. This is with 5W30 dino oil. I'll put my heavier synthetic in at 1500 miles.
It's been my dream for a fhew years, but I'm goin' 16VT because of less fuel consumption... As I was told.
I lost my job, and now 16VT project will hold.
The sound of the PERFECT!
With the purchase of our new BBM Supercharger kit.
The BBM 16v Ltd. integration is $400 dollars off of the already low sale price.
You will need to call in your order for this VWVortex deal.