*NEW LOWER PRICING ON 2.0L OEM/MAINTENANCE PARTS*

[AFromCT]

Could not be any more pleased with my purchase from you guys. Simple paypal payment, a couple Vortex IMs, a delivery e-mail and BAM! It was at my door the next day.
Thanks to all of you guys at MJM down there in the big state.

[MJM Autohaus]

CONTROL ARM KITS WITH POLY BUSHINGS PRESSED FOR MK3 - $139.95 WITH FREE SHIPPING!

[marco2.0]

price for an obd1 catalitic converter

[MJM Autohaus]

Quote, originally posted by K2Golf1.8 »

Looking for an OEM Clutch for an 8v. LMK, Thanks

The SACHS OEM clutches for the MK3s are $124.95

Quote, originally posted by DubberFromCT »

Could not be any more pleased with my purchase from you guys. Simple paypal payment, a couple Vortex IMs, a delivery e-mail and BAM! It was at my door the next day. Thanks to all of you guys at MJM down there in the big state.

Thanks, buddy! We're here busting our tails to take care of you guys.

Quote, originally posted by marco2.0 »

price for an obd1 catalitic converter

$144.95 shipped to your door.

[Fluxburn64]

The life long sale lol. I know a furniture store, always has a sale sign too. LoL.

[tauntedmonster]

How about a price on OEM Plugs, Wires, Distributor cap and rotor?

For an OBDI 2.0

[MJM Autohaus]

DOING A BRAKE UPGRADE WITH HAWK PERFORMANCE PADS? ASK US FOR THE "VORTEX DEAL" ON HAWK!

[huskylord]

Price for a timing belt kit 97 Jetta with water pump(including houseing) and timing belt tensioner tool

and

PCV valve cover with grommet

[MJM Autohaus]

Quote, originally posted by tauntedmonster »

How about a price on OEM Plugs, Wires, Distributor cap and rotor? For an OBDI 2.0

How about $99.95 for all of the above? Shipping would be $10 to Minnesota - all Bosch goodness

Give us a ring at 210.DUB.PART (382.7278) if you need to place an order. It can ship same say.

Quote, originally posted by huskylord »

Price for a timing belt kit 97 Jetta with water pump(including houseing) and timing belt tensioner tool and PCV valve cover with grommet

PM sent with some questions.

[Kameirocco]

Modified by Kameirocco at 5:44 AM 6-1-2006

[GaTeIg]

Do you have/$ (for 2.0 mk4): Steel brake lines, front brake caliper, brake fluid? thanks!

[doodpod]

Price for a pair of rear brake calipers for a Mk IV 2.0 and a G60 flywheel/VR6 clutch package shipped to zip 14527?

[MJM Autohaus]

Quote, originally posted by GaTeIg »

Do you have/$ (for 2.0 mk4): Steel brake lines, front brake caliper, brake fluid? thanks!

A set of NEUSPEED Stainless Lines, a set of front brake calipers with can of ATE Brake Fluid would all be $249.95 shipped to your door. Also, for those of you that might be needing just front stainless lines (and not the entire set), MJM is a proud distributor of StopTech Stainless Steel lines, too. Please note that there is a $60 core (each) on the calipers, but that we do have new calipers (without core) available, too. PM us here through the site if we can help.

Quote, originally posted by doodpod »

Price for a pair of rear brake calipers for a Mk IV 2.0 and a G60 flywheel/VR6 clutch package shipped to zip 14527?

The SACHS VR6/G60 Clutch and Flywheel with both left and right calipers would all be $549.95 with free shipping ($75 core charge on the rear calipers).

[spitpilot]

Looking to do timing belt/water pump dodah soon...'96 2.0L (I have "stud kit" installed on TB tensioner already). Here's what I'm looking to replace:
timing belt/tensioner, serp belt/tensioner roller, power steering belt, water pump (just pump and gasket not the housing, I used antisieze on the pump bolts so none should snap off this time around) Please shoot me a total price, shipped to 95014. Thanks!.

[MJM Autohaus]

Quote, originally posted by spitpilot »

Looking to do timing belt/water pump dodah soon...'96 2.0L (I have "stud kit" installed on TB tensioner already). Here's what I'm looking to replace: timing belt/tensioner, serp belt/tensioner roller, power steering belt, water pump (just pump and gasket not the housing, I used antisieze on the pump bolts so none should snap off this time around) Please shoot me a total price, shipped to 95014. Thanks!.

The timing belt, tensioner, serpentine belt, tensioner roller, power steering belt, and water pump would all be $74.95 plus $10 for shipping.

Give us a call at 210.DUB.PART (382.7278) to place an order.

[94jetta~~]

sent im about a fpr

[MetroBrian]

Ok i need a bunch of stuff SO here goes All for a 97 MKIII 2.0
Brembo or Ate Rotors
Mintex Red box pads
D.O.T. SS braided brake hoses
TRW tie rods (L&R)
TRW steering rack bushing?
Steering rack boots
Front sway bar links and bushings
if you carry camber bolts those too

Seperate price for each item below please
Ignition coil
Distributor
28mm rear sway bar
Front strut bar
rear strut bar
front lower strut bar
shifter rebuild kits?
short shifter

Brian

[MJM Autohaus]

*OEM TIMING BELT "PLUS" KIT WITH WATER PUMP AND T-STAT WITH OPTION FOR STRETCH BOLTS*

[vasillalov]

I just want to give two for MJM. Excellent people to deal with and my products were shipped ULTRAFAST!

P.S.
Thanks for the suspension

[ABF Jeff]

Here's one for you... 1.8L 16V full bottom end seal, bearing, and ring kit.

[GaTeIg]

Sent you in IM...

[MJM Autohaus]

Quote, originally posted by ABF Jeff »

Here's one for you... 1.8L 16V full bottom end seal, bearing, and ring kit.

The bottom end gasket set, main bearing set, rod bearing set, and piston ring set would all be $124.95 plus $5 for shipping!

[ABF Jeff]

Quote, originally posted by MJM Autohaus »

The bottom end gasket set, main bearing set, rod bearing set, and piston ring set would all be $124.95 plus $5 for shipping!

You're sure that's everything?

[MJM Autohaus]

Quote, originally posted by ABF Jeff »

You're sure that's everything?

One of these days you guys are going to realize that MJM does not mess around when it comes to deals! We're here to save you coin!

[ABF Jeff]

Its crazy how cheap you guys can price stuff... definitely worth my money! Paypal?

[ABF Jeff]

Don't really have a year for this engine, would it be easier to have an engine code?

[MJM Autohaus]

Quote, originally posted by ABF Jeff »

Don't really have a year for this engine, would it be easier to have an engine code?

Give us a call at 210.DUB.PART (382.7278) and ask for a dude named Kelly. Yes, he has a woman's name, but he's dude.

Talk to him, he's the parts expert; he'll get you squared away and taken care of.

[ABF Jeff]

Quote, originally posted by MJM Autohaus »

Give us a call at 210.DUB.PART (382.7278) and ask for a dude named Kelly. Yes, he has a woman's name, but he's dude. Talk to him, he's the parts expert. He'll get you squared away and taken care of.

Oooh, kelly, sounds cute...

Good deal, man.

[MetroBrian]

ok, now i need a price on a distributor shipped to 92324

Brian

[all-starr-me]

how much for just the 2 front arm bushings from the TT/R32?

[MJM Autohaus]

*GENUINE OE INNER RIGHT CV JOINT BOOT KIT - $14.95 - CLICK PICTURE BELOW FOR MORE INFO OR TO BUY*

[all-starr-me]

Thats for these ones: http://www.worldimpex.com/item...81148
right?

because I want to keep my poly in the rear and HD rubber in the front.

[MJM Autohaus]

Quote, originally posted by all-starr-me »

Thats for these ones: http://www.worldimpex.com/item...81148 right? because I want to keep my poly in the rear and HD rubber in the front.

Oh, you want the front ones? The quote I gave you and the picture you posted is for the rears. Did you want the fronts or rears? I sent you an IM.

[ABF Jeff]

bump

[splinterz88]

IM sent