Who cares what they call it? They have super low prices, and from what I hear, great service.
for MJM
#141
IM Sent
#142
Who cares what they call it? They have super low prices, and from what I hear, great service.
for MJM
Originally Posted by soccergk
#143
you guys carry a good clutch kit for a mkIII that will soon have a turbo? whats the price? also wanted to know the price of the bolt kit for the 020 tranny. thanks
#144
pm sent
HAD - 1991 V8Q | 1990 Jetta 1.6 | 1984 Rabbit 16v | 1990 Audi CQ | 1988 Audi 80 10v | 2005 GTi 1.8T | 1991 GTI 2.0 ABA | 2002 Audi TT S362 |
HAVE - 2001 TT 180Q F23 wifes | 1989 Jetta VR6 GLI | 2004 F250 PowerStroke |
Looking for Custom Tuning, Shoot me a PM ! ME7.X !
#145
hope your gasket kits dont come with as many incorrect gaskets as mine did. 2 was too many during a rebuild. look at my rebuild thread for pics of said gaskets.![]()
#146
i need valve seals for mk4 2.0 AZG motor
DONT PM THIS ACCOUNT!! I RARELY CHECK IT!
IF YOU HAVE QUESTIONS/CONCERNS/ISSUESWITHZOMBIES PLEASE IM MY OTHER ACCOUNT BELOW:
Quintin@USRT
#147
HOLY MESS THATS CHEAP!
DONT PM THIS ACCOUNT!! I RARELY CHECK IT!
IF YOU HAVE QUESTIONS/CONCERNS/ISSUESWITHZOMBIES PLEASE IM MY OTHER ACCOUNT BELOW:
Quintin@USRT
#148
i'm also lookin for a non-power passeger side mirror for my mk4 and the front strut bearings (think thats what they're called) what ever the rubber discs are that go on top of the front struts...![]()
Modified by the_q_jet at 3:45 PM 10-24-2006
DONT PM THIS ACCOUNT!! I RARELY CHECK IT!
IF YOU HAVE QUESTIONS/CONCERNS/ISSUESWITHZOMBIES PLEASE IM MY OTHER ACCOUNT BELOW:
Quintin@USRT
#149
and a gas cap...lost mine at h2o
DONT PM THIS ACCOUNT!! I RARELY CHECK IT!
IF YOU HAVE QUESTIONS/CONCERNS/ISSUESWITHZOMBIES PLEASE IM MY OTHER ACCOUNT BELOW:
Quintin@USRT
#150
how about an OEM MKIII ABA rear engine soft-mount???
#151
Quote, originally posted by the_q_jet » HOLY MESS THATS CHEAP! We here at MJM seem to here that a lot. It's getting kinda old!
Best deals on the web are found at http://www.mjmautohaus.com :com:
Quote, originally posted by the_q_jet » i'm also lookin for a non-power passeger side mirror for my mk4 and the front strut bearings (think thats what they're called) what ever the rubber discs are that go on top of the front struts... ![]()
No go on the manual mirrors, we only offer the power versions.
The strut mount/bearing kits are on the site. Check them out at http://www.mjmautohaus.com
Quote, originally posted by the_q_jet » and a gas cap...lost mine at h2o $17.50 for a genuine OE Volkwagen cap. Give us call to place your order.
Quote, originally posted by ABF Jeff » how about an OEM MKIII ABA rear engine soft-mount??? IM sent, Jeff!
![]()
MJM Autohaus (www.mjmautohaus.com) - AIM/YIM: mjmautohaus
Apparel :: Distribution :: Free Shipping :: Installation :: OEM Parts :: Retail :: Wholesale
#152
Quote, originally posted by MJM Autohaus »
IM sent, Jeff!![]()
Kelly, between you and the USRT guys, I swear I'm going to lose my house.
![]()
#153
do you have all the wiring for the power..cuz i'll convert!
DONT PM THIS ACCOUNT!! I RARELY CHECK IT!
IF YOU HAVE QUESTIONS/CONCERNS/ISSUESWITHZOMBIES PLEASE IM MY OTHER ACCOUNT BELOW:
Quintin@USRT
#154
oh and as of this morning i now need a new or reman alternator
DONT PM THIS ACCOUNT!! I RARELY CHECK IT!
IF YOU HAVE QUESTIONS/CONCERNS/ISSUESWITHZOMBIES PLEASE IM MY OTHER ACCOUNT BELOW:
Quintin@USRT
#155
Quote, originally posted by the_q_jet » oh and as of this morning i now need a new or reman alternator Give us a call, mate!
![]()
MJM Autohaus (www.mjmautohaus.com) - AIM/YIM: mjmautohaus
Apparel :: Distribution :: Free Shipping :: Installation :: OEM Parts :: Retail Sales
Authorized WD for APR, Eibach, Forge, Hawk, H&R, KONI, Magnaflow, MOMO, NEUSPEED
#156
You should try starting the car and then while it is running removing the negative cable on the battery, if the car dies, you need a new altenator because the car is using power from the battery.
#157
How much for 2 rear upper spring seats for MKIV 2.0 Jetta?
#158
Last edited by MJM Autohaus; 10-26-2011 at 05:31 AM.
MJM Autohaus (www.mjmautohaus.com) - AIM/YIM: mjmautohaus
Apparel :: Distribution :: Free Shipping :: Installation :: OEM Parts :: Retail :: Wholesale
#159
Will you be in stock anytime soon? I have a friend who needs a new set.
#160
Wondering if you have the bolts that screw into the 8v head and hold down the valve cover. Also if you carry any of the 6mm hex bolts that are used several places on the block.Thanks and great prices
![]()
![]()
#161
Quote, originally posted by sumpsfast » Wondering if you have the bolts that screw into the 8v head and hold down the valve cover. Also if you carry any of the 6mm hex bolts that are used several places on the block. Thanks and great prices
![]()
![]()
Do not have, sorry.
MJM Autohaus (www.mjmautohaus.com) - AIM/YIM: mjmautohaus
Apparel :: Distribution :: Free Shipping :: Installation :: OEM Parts :: Retail Sales
Authorized WD for APR, Eibach, Forge, Hawk, H&R, KONI, Magnaflow, MOMO, NEUSPEED
#163
hey could you message me prices for a valve cover gasket, upper intake manifold gasket, and your timing belt plus kit for an mk4 jetta 8v
#164
mk4 2.0 (Motor Code: AZG) piston rings and rod bearings... $$??
DONT PM THIS ACCOUNT!! I RARELY CHECK IT!
IF YOU HAVE QUESTIONS/CONCERNS/ISSUESWITHZOMBIES PLEASE IM MY OTHER ACCOUNT BELOW:
Quintin@USRT
#165
Quote, originally posted by McNeil » How much for 2 rear upper spring seats for MKIV 2.0 Jetta?
www.mjmautohaus.com
Quote, originally posted by 2slowvw » hey could you message me prices for a valve cover gasket, upper intake manifold gasket, and your timing belt plus kit for an mk4 jetta 8v All those items are up on the site, mate!
![]()
Quote, originally posted by the_q_jet » mk4 2.0 (Motor Code: AZG) piston rings and rod bearings... $$?? Got them both in stock. There are a few different options, though. Give us a call.
Last edited by MJM Autohaus; 10-26-2011 at 05:28 AM.
MJM Autohaus (www.mjmautohaus.com) - AIM/YIM: mjmautohaus
Apparel :: Distribution :: Free Shipping :: Installation :: OEM Parts :: Retail :: Wholesale
#166
Do you carry a starter for a MK3 2.0 Jetta.Whats the price???
#167
Umm, I dont know if its been said, but the picture for the mk3 2.0 coil is actually a mk3 vr6 coil, and a vr6 coil for 50 bucks is quite the bargain.
Feel free to follow me on instagram @wesmurphy for pictures of bikes, bimmers, vws, etc
my "build" thread: 16v+carbs FOR SALE!!!
My gti is for sale, check it out! http://forums.vwvortex.com/showthrea...7#post79821897
#168
Would you reccommend replacing the lifters when you add an aftermarket cam? If so would these work on an OBD2 2.0 8v, didn't see my model year in the application list. Thanks.
#169
can I get a price quote on a 270 and matching lifters for an 8V?
#170
Quote, originally posted by Cabrio60 » Would you reccommend replacing the lifters when you add an aftermarket cam? If so would these work on an OBD2 2.0 8v, didn't see my model year in the application list. Thanks.
http://www.mjmautohaus.com/cat...d=902![]()
Doing lifters is never a bad idea when doing a cam.
The lifters for your car will be added here shortly.
Quote, originally posted by yeayeayea » Umm, I dont know if its been said, but the picture for the mk3 2.0 coil is actually a mk3 vr6 coil, and a vr6 coil for 50 bucks is quite the bargain.
The image might be for illustrative purposes only. That said, you will receive the part you order.
If you have a MK3, you will receive a MK3 part. If you have a MK4, you will receive a MK4 part, etc.![]()
Quote, originally posted by ABF Jeff » can I get a price quote on a 270 and matching lifters for an 8V? Give us a call, Jeff.
![]()
Last edited by MJM Autohaus; 10-26-2011 at 05:32 AM.
MJM Autohaus (www.mjmautohaus.com) - AIM/YIM: mjmautohaus
Apparel :: Distribution :: Free Shipping :: Installation :: OEM Parts :: Retail :: Wholesale
#171
hi could i get a price for a 276* cam with valve springs, retainers and oem hydrolic lifters? for mk4 AEG.. thanks ah
Modified by RedBeetkeon18z at 2:26 AM 4-5-2007
#172
Quote, originally posted by RedBeetkeon18z » hi could i get a price for a 276* cam with valve springs, retainers and oem hydrolic lifters? for mk4 AEG.. thanks ah
Modified by RedBeetkeon18z at 2:26 AM 4-5-2007If it's shipping to Hawaii, give us a call, as there are a few different ways to ship to the island.
Thanks!
|| MJM Autohaus || (www.mjmautohaus.com) : Apparel : Distribution : Installation :
:: ARP : Eibach : Forge : H&R : Hawk : KONI : NEUSPEED : Magnaflow :: Power Slot ::
+ Wholesale-Pricing-To-The-Public on your OEM VAG Maintenance Replacement Parts!
#173
whats the price on a 210mm Sach clutch kit to go with my Eurospec 9lb flywheel?Price shipped would be nice
NJ 08204
#174
Quote, originally posted by jess@mjm »
http://www.mjmautohaus.comMy homepage!
![]()
#175
ordered a 16v clutch kit and flywheel from you guys yesterday![]()
Originally Posted by soccergk