LOW PRICING & QUICK SHIPPING ON CORRADO OEM/MAINTENANCE PARTS!

[dapucker1]

great i need the fronts... i will paypal if you'd like
can you im me all the necessary info?

[dapucker1]

paypal sent! thanks

[dapucker1]

havn't seen my strut bearings yet.... its been 3 weeks

[SqnTZVERDERaDo]

Do you have a list of all electrical components you have for a Corrado SLC 1992? I need a new crank sensor, battery cables, distributor rotor.

[MJM Autohaus]

Quote, originally posted by dapucker1 »

strut bearings on sale as well?

VR6 strut bearings? Just the bearings all by themselves?

$12.50 shipped to your door.

Quote, originally posted by SqnTZVERDERaDo »

Do you have a list of all electrical components you have for a Corrado SLC 1992? I need a new crank sensor, battery cables, distributor rotor.

Those items (less the battery cable) are up on the site at http://www.mjmautohaus.com


Modified by MJM Autohaus at 4:24 PM 10-31-2008

[SqnTZVERDERaDo]

Awesome, great pricing on the crank sensor! Thanks, should be placing my order soon!

You have IM.

[dbl_yelo_rado3]

does the headgasket set in the vr6 corrado category on your website include the metal mk4 gasket ?

[info@mjm]

Quote, originally posted by dbl_yelo_rado3 »

does the headgasket set in the vr6 corrado category on your website include the metal mk4 gasket ?

No, it does not, but it can be substituted.

[PedroGringo]

Hey MJM folks.

How about rebuild kits for front and rear brake calipers? I had my rear calipers off and noticed that the boots were cut. I also need the rear mounting pins and the boots that protect those too. I don't know if that is part of the regular rebuild kit.

Thanks for your support of this forum.

Pete

[vw_dred]

The Audi TT 4-pc control arm bushing sets shows $39.95 with free shipping here, but $42.50 on the website. Which is it - I need a set..

-Thanks..

[LBSOHK]

Quote, originally posted by jess@mjm »

This thread is over a year old and needs to be updated by Juan's lazy tail. The current pricing on our site is accurate.

sounds shady

[MJM Autohaus]

Quote, originally posted by LBSOHK »

sounds shady

There's an old saying. Something about a kettle and a pot...

[Germanpower SLC]

Free bump for a great shop with great prices and products.

Thanks for everything again.

[LBSOHK]

Quote, originally posted by MJM Autohaus »

There's an old saying. Something about a kettle and a pot...

dont know that one

[DeathWobble]

yes im looking for a hood release cable. handle, cable, little things that go on it for the rad./ supt. the whole setup. 90 g60 corrado
can you beat my stealership? shipped to 49417 thx
tom

[actionVR6]

Responded to e-mail asking where parts would be shipped to... Guessing you guys are just crazy busy.

[German Juggernaut]

I have been through two "new oem" G60 radiators so far, neither of which fit my car. I know the support bar that holds it is right, so there has to be something wrong with the radiators I have been getting.

Have you heard of any problem like this? Could you tell me the exact distance pin to pin on the G60 radiator you have?

[Lanceevox]

Is this for the front suspension? http://www.mjmautohaus.com/cat...d=767

[Lanceevox]

Does this work with aftermarket weitec coilvers or just springs and struts? http://www.mjmautohaus.com/cat...d=864

[MJM Autohaus]

A BIGGER SELLER - HEAVY DUTY OEM TRANSMISSION MOUNT - $14.95 - CLICK PIC FOR INFO!

[itskmill06]

would it be possible to just get one samco hose? i am looking for the t-hose for the oil cooler (prone to failure )

[silverG60]

Do you guys carry OEM Bosch tempered foglights for the slc? I saw you have the turn sigs on your site but didnt see the foglights.

Thanks,
Nick

[nodq]

I just bought some ball joints from you guys and went to put them in today, only to find out my control arm bushings are bad too.

On top of that, one of the bolts that held the shock to the wheel bearing housing (steering knuckle) had snapped! I'll get that from the dealer.

So i'm in need of TT/R32 controls arm bushings (that 4 piece kit), some sway bar endlinks (Sway Bar Endlinks, Set of Two [535411315MY.SET]), and quite possible a shocks & springs kit (can't afford coilovers), but you guys don't list them on your site.

If you got any, let me know via email or im me. bmale1@hotmail.com

Perhaps we can get a package deal going.

[Corrado Seeker]

I could use a few oil filters for a '93 Corrado SLC.

[MJM Autohaus]

Quote, originally posted by DeathWobble »

yes im looking for a hood release cable. handle, cable, little things that go on it for the rad./ supt. the whole setup. 90 g60 corrado can you beat my stealership? shipped to 49417 thx tom

Do not have those, sorry.

Quote, originally posted by German Juggernaut »

I have been through two "new oem" G60 radiators so far, neither of which fit my car. I know the support bar that holds it is right, so there has to be something wrong with the radiators I have been getting. Have you heard of any problem like this? Could you tell me the exact distance pin to pin on the G60 radiator you have?

Have not heard of any problem like this, no. Where did you purchase the radiators from? And give us a ring on that G60 question and ask for Mark.

Quote, originally posted by Lanceevox »

Is this for the front suspension? http://www.mjmautohaus.com/cat...d=767

Yes, that is the front strut mounts with bearings for VRs.

Quote, originally posted by Lanceevox »

Does this work with aftermarket weitec coilvers or just springs and struts? http://www.mjmautohaus.com/cat...d=864

Yes.

Quote, originally posted by itskmill06 »

would it be possible to just get one samco hose? i am looking for the t-hose for the oil cooler (prone to failure )

Sorry, do not have.

Quote, originally posted by silverG60 »

Do you guys carry OEM Bosch tempered foglights for the slc? I saw you have the turn sigs on your site but didnt see the foglights. Thanks, Nick

They're not on our site, but it wouldn't be a problem getting you a set of OEM foglights. Give us a call if we can help.

Quote, originally posted by nodq »

I just bought some ball joints from you guys and went to put them in today, only to find out my control arm bushings are bad too. On top of that, one of the bolts that held the shock to the wheel bearing housing (steering knuckle) had snapped! I'll get that from the dealer. So i'm in need of TT/R32 controls arm bushings (that 4 piece kit), some sway bar endlinks (Sway Bar Endlinks, Set of Two [535411315MY.SET]), and quite possible a shocks & springs kit (can't afford coilovers), but you guys don't list them on your site. If you got any, let me know via email or im me. bmale1@hotmail.com Perhaps we can get a package deal going.

Give us a call and ask for Kelly.

Quote, originally posted by Corrado Seeker »

I could use a few oil filters for a '93 Corrado SLC.

http://www.mjmautohaus.com/cat...=1666

[NVmyVW]

1 million for Kelly and MJMAutohaus.

Great deal on Koni Coilovers (for the S4 ) fast shipping, and great service when on a last minute swaybar endlink fiasco.

Thank You

[mattammo]

Do you guys have any Retaining Springs for the Clutch Release Lever ?

[tachycardia]

Just ordererd up this gem:

I sure know how to have fun.

[G60Junky]

dude, they should offer some coupons for first-time customers.

[G60Junky]

[mkalajian]

anyone know if these dudes take paypal?

[G60Junky]

paypal is good dude.

[GoKart_16v]

Does MJM carry any hubcentric 8mm H&R spaces for 4x100?

[GoKart_16v]

Quote, originally posted by jess@mjm »

Out of spacers right now, sorry.

do u have an estimate of when u might be getting some? I notice those 8mm hubcentric 4x100 are rare for some reason...any chance of u ever get some of those?

[Cor32rado]

Do you guys carry fuel pump/sending unit assemblys for a 1990.5 g60?

Or know anyone that can rebuild one?

thanks
Jake