VWVortex


Links back to The Car Lounge (opens in same window)
+ Reply to Thread
Page 93 of 128 FirstFirst ... 43 83 89 90 91 92 93 94 95 96 97 103 ... LastLast
Results 3,221 to 3,255 of 4446

Thread: Go ahead...ask those car questions you were always afraid to ask...

  1. Member Surf Green's Avatar
    Join Date
    Feb 16th, 1999
    Location
    Silver Spring, GerryMarylandering
    Posts
    12,596
    Vehicles
    2002 Golf Wagon TDI. 1996 Surf Green GTI VR6. 2005 Chrysler T&C.
    04-11-2012 06:06 AM #3221
    Quote Originally Posted by Dustin168 View Post
    If you had the manufacturing/fabricating means available, could you put a turbo on any engine? Say, a 22RE? And I mean a big turbo, like something off a tractor trailer.
    Yes, you can.

    But it wouldn't work.

    You probably wouldn't get the flow through the exhaust to generate any boost, and even if you managed to get it spinning, it's you'd measure lag in months.
    I'm just here for the sanctimonious circle jerk.
    2002 Golf Wagon TDI - 1996 GTI VR6 - YouTube Track Videos - flickr

  2. Member Surf Green's Avatar
    Join Date
    Feb 16th, 1999
    Location
    Silver Spring, GerryMarylandering
    Posts
    12,596
    Vehicles
    2002 Golf Wagon TDI. 1996 Surf Green GTI VR6. 2005 Chrysler T&C.
    04-11-2012 06:12 AM #3222
    Quote Originally Posted by josh_did_what View Post
    I was just reading somewhere (although I cant remember where) that on FWD racing cars (ie cars pushed to their limits) that rear spoilers increase the traction on the rear wheels (duh) which helps prevent oversteer caused by loss of traction from rear sway bars.

    How exactly does this work? Wouldnt the two just cancel each other out to an extent, or is just that its designed to be proportional.
    I'd say it has everything to do with speed.

    At low speeds, a FWD car that's tuned to oversteer is great. At high speeds, it can get a bit sketchy.
    Wing downforce: Not much at low speeds. More at high speeds.

    Sounds perfect.
    I'm just here for the sanctimonious circle jerk.
    2002 Golf Wagon TDI - 1996 GTI VR6 - YouTube Track Videos - flickr

  3. Senior Member A.Wilder's Avatar
    Join Date
    Mar 1st, 2003
    Location
    Raleigh, NC
    Posts
    20,998
    Vehicles
    08 Elantra, 12 Focus
    04-11-2012 07:06 AM #3223
    Quote Originally Posted by MustacheGT View Post
    What differentiates a poor fender roll from a good one other than cracked paint?

    I need to have all four of mine rolled soon and want to be as anal as possible about it.
    Both will crack your paint if you do it wrong. Most people use a heat gun to warm the paint up and make it more pliable for the rolling, but this is not 100% effective. If you are rolling fenders i would expect to need some touch-up or repair. IMO, the "right" way to do it would be sanding it down, rolling it, and painting/ blending the area for the best results and rust protection.
    Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.
    Mark Twain

  4. Member josh_did_what's Avatar
    Join Date
    Apr 16th, 2009
    Location
    poughkeepsie ny
    Posts
    1,204
    Vehicles
    03 civic si
    04-11-2012 08:42 AM #3224
    Quote Originally Posted by MrMook View Post
    I hadn't thought about it in that way, but here's my guess:
    A large rear sway bar on a FWD car induces oversteer (or reduces understeer, depending on how you look at it). Either way, it helps bring the rear end around in corners. That's great for low-speed handling, and tight maneuvers. That may not be so great at higher speeds....so to reduce mid-corner lift of the inside rear wheel at speed, a little downforce might be the ticket. Best of both worlds: High speed stability, paired with low-speed maneuverability.

    Survey says? Am I close?

    Quote Originally Posted by Surf Green View Post
    I'd say it has everything to do with speed.

    At low speeds, a FWD car that's tuned to oversteer is great. At high speeds, it can get a bit sketchy.
    Wing downforce: Not much at low speeds. More at high speeds.

    Sounds perfect.
    Ahh thank you, I dont know why I couldnt wrap my head around that lol.
    Quote Originally Posted by UNBANNED_GERBIL View Post
    Phew!!! Thank goodness it's a VW troll thread. If it were a Hyundai troll thread the bukkake faced fanboys would be frothing at the mouth

  5. Member Surf Green's Avatar
    Join Date
    Feb 16th, 1999
    Location
    Silver Spring, GerryMarylandering
    Posts
    12,596
    Vehicles
    2002 Golf Wagon TDI. 1996 Surf Green GTI VR6. 2005 Chrysler T&C.
    04-11-2012 08:48 AM #3225
    Quote Originally Posted by josh_did_what View Post
    Ahh thank you, I dont know why I couldnt wrap my head around that lol.
    LOLs... I didn't even read the response before mine. I just saw that Scion, and thought, "Move along... nothing to see here... "
    I'm just here for the sanctimonious circle jerk.
    2002 Golf Wagon TDI - 1996 GTI VR6 - YouTube Track Videos - flickr

  6. Member josh_did_what's Avatar
    Join Date
    Apr 16th, 2009
    Location
    poughkeepsie ny
    Posts
    1,204
    Vehicles
    03 civic si
    04-11-2012 09:44 AM #3226
    Quote Originally Posted by Surf Green View Post
    LOLs... I didn't even read the response before mine. I just saw that Scion, and thought, "Move along... nothing to see here... "
    Lmao well in your defense , doesnt that wing reduce rear stability?
    Quote Originally Posted by UNBANNED_GERBIL View Post
    Phew!!! Thank goodness it's a VW troll thread. If it were a Hyundai troll thread the bukkake faced fanboys would be frothing at the mouth

  7. 04-11-2012 03:43 PM #3227
    Why do some left hand drive 911 wipers hang left, others right?


  8. Member Surf Green's Avatar
    Join Date
    Feb 16th, 1999
    Location
    Silver Spring, GerryMarylandering
    Posts
    12,596
    Vehicles
    2002 Golf Wagon TDI. 1996 Surf Green GTI VR6. 2005 Chrysler T&C.
    04-11-2012 03:56 PM #3228
    Quote Originally Posted by bajaboyextra View Post
    Why do some left hand drive 911 wipers hang left, others right?
    I had to zoom in to see if the car on the left was right hand drive.... but it's not. I would have thought that would be the reason.
    I'm just here for the sanctimonious circle jerk.
    2002 Golf Wagon TDI - 1996 GTI VR6 - YouTube Track Videos - flickr

  9. Member mobile363's Avatar
    Join Date
    Oct 13th, 2003
    Posts
    6,523
    Vehicles
    2012 Kia Rio5 6MT, 2012 Dodge Caravan
    04-11-2012 04:27 PM #3229
    Quote Originally Posted by Surf Green View Post
    I had to zoom in to see if the car on the left was right hand drive.... but it's not. I would have thought that would be the reason.
    Im sure it depends on the market its sold in. If you drive on right hand side of the road, it goes one way, left hand side of road it goes the other way.

    Makes sense but i cant say for sure that is the reason

  10. Member Surf Green's Avatar
    Join Date
    Feb 16th, 1999
    Location
    Silver Spring, GerryMarylandering
    Posts
    12,596
    Vehicles
    2002 Golf Wagon TDI. 1996 Surf Green GTI VR6. 2005 Chrysler T&C.
    04-11-2012 04:31 PM #3230
    Looking at the picture again, the wiper pivots are symmetrical to either side of the car, and wipe 180 degrees...

    edit: a little searching shows that changing the "park" position of the wipers from the stock location on the left, to the right, is fairly popular.
    Last edited by Surf Green; 04-11-2012 at 04:41 PM.
    I'm just here for the sanctimonious circle jerk.
    2002 Golf Wagon TDI - 1996 GTI VR6 - YouTube Track Videos - flickr

  11. 04-11-2012 07:59 PM #3231
    Quote Originally Posted by Surf Green View Post
    Looking at the picture again, the wiper pivots are symmetrical to either side of the car, and wipe 180 degrees...

    edit: a little searching shows that changing the "park" position of the wipers from the stock location on the left, to the right, is fairly popular.
    Thanks! I didn't know you could change the park setting. Having the wiper park in my field of vision on my '66 has bugged me since I got it in '80.

  12. Member monoaural's Avatar
    Join Date
    May 5th, 2005
    Location
    Manteca, CA
    Posts
    2,805
    Vehicles
    74 Corolla, 81 Rabbit Pickup D, 89 GTI 16v
    04-11-2012 10:35 PM #3232
    Quote Originally Posted by bajaboyextra View Post
    Thanks! I didn't know you could change the park setting. Having the wiper park in my field of vision on my '66 has bugged me since I got it in '80.
    Mk2 golf/gtis do it too, because stock it is parked up at an angle, looks way better level on the other side.
    -Jon

  13. Junior Member Bullethead's Avatar
    Join Date
    Apr 24th, 2011
    Location
    South Florida
    Posts
    31
    04-23-2012 02:24 AM #3233
    Quote Originally Posted by bajaboyextra View Post
    Why do some left hand drive 911 wipers hang left, others right?
    All early 911 (1964-67) wiper arms are painted silver and park on the right, regardless of RHD or LHD. After August 1967 (beginning 1968 model year) Porsche painted them black and changed to park on the left for LHD and right for RHD.
    Oil Cooled Heart

  14. Member the flying grape!'s Avatar
    Join Date
    Dec 4th, 1999
    Posts
    3,446
    Vehicles
    08 528i, 02 VW 337, 93 F-150
    04-23-2012 10:06 AM #3234
    Does anyone know what causes the whine that I remember from classic GM automatic transmissions for RWD? The whine starts when the car begins moving from a stop, the whine increases in frequency until the transmission shifts gears, and then the whine goes away.

  15. 04-23-2012 11:58 AM #3235
    depending on what transmission, ususally it is because first gear would have straight-cut gears (stronger), and the higher gears would be helical-cut. (quieter)
    Mustang ownership: cruising at 1500 RPM: oops time to upshift!

  16. Member adrew's Avatar
    Join Date
    Aug 14th, 2003
    Location
    Texas
    Posts
    10,652
    Vehicles
    Yaris x2
    04-23-2012 12:18 PM #3236
    Quote Originally Posted by the flying grape! View Post
    Does anyone know what causes the whine that I remember from classic GM automatic transmissions for RWD? The whine starts when the car begins moving from a stop, the whine increases in frequency until the transmission shifts gears, and then the whine goes away.
    Panther-platform Fords do it, too. (Crown Vic, Town Car, Grand Marquis).

    I've always sort of wondered about it but never did any research. I found this thread:
    http://www.grandmarq.net/vb/showthre...ow-speed-whine

    Quote Originally Posted by thread
    It is the tranny gears. It's simply gear whine and nothing to be worried about. That whine is what makes the AOD gear pack to durable. The gears are relatively straiter than most, straiter cut gears whine more, but are stronger.
    Last edited by adrew; 04-23-2012 at 12:20 PM.
    Improving the signal-to-noise ratio

  17. Member MrMook's Avatar
    Join Date
    Dec 2nd, 2006
    Location
    Brooklyn, NY
    Posts
    4,085
    Vehicles
    o_O
    04-23-2012 03:13 PM #3237
    What are these holes all about? Mostly seen on "tuner" cars, but I've seen it on some track cars as well.


  18. Member TheDarkEnergist's Avatar
    Join Date
    Aug 21st, 2009
    Location
    Crooklyn
    Posts
    8,300
    Vehicles
    E46 330ci and Bikes.
    04-23-2012 03:17 PM #3238
    Quote Originally Posted by MrMook View Post
    What are these holes all about? Mostly seen on "tuner" cars, but I've seen it on some track cars as well.
    That's a DIY(also W) rear "diffuser."

    I'm using quotes because I don't think diffuser is the right term. But in theory it's supposed to let all the air that gets trapped in the concave of the rear bumper out, decreasing drag and increasing top speed.
    Free "The GOD DAMN RANT Thread"!

  19. Member
    Join Date
    Mar 25th, 2009
    Location
    Fairfax, VA
    Posts
    1,839
    Vehicles
    04 M3, 99 A4 2.8
    04-23-2012 04:00 PM #3239
    Why do MotoGP drivers in racing stick their knees out in the direction of the lean when cornering? Maybe other bikers do this too but I'm not sure. For balance? How does this work?


  20. 04-23-2012 05:08 PM #3240
    Well in events like MotoGP they are wearing kneepads and will occasionally use there knee off the ground. usully use to throw your weight around, balance, when in a turn.

  21. Moderator the brit's Avatar
    Join Date
    Jun 23rd, 2003
    Location
    Pottstown, PA
    Posts
    20,806
    Vehicles
    VW Fox 16v
    04-23-2012 06:14 PM #3241
    Quote Originally Posted by weenerdog3443 View Post
    Well in events like MotoGP they are wearing kneepads and will occasionally use there knee off the ground. usully use to throw your weight around, balance, when in a turn.


    Yes, balance and can also be a minor breaking assist. You can shift your more than 1/2 your body off the bike to help corner, while leaving the bike more upright to have a larger tire contact patch on the track surface:



    Doing it on the road is fun, but often pointless - staying tucked in, being smoother and more aerodynamic would be quicker overall if you're not going fast enough to need to corner that hard.


    Some riders (Rossi especially) started to put their whole foot and leg out, which has been catching on a bit more. Is it not too widespread.




    The real pros (i.e. not a road rider) can 'catch' a bike with their knee and elbow - if the bike starts to low-side, they can try to catch it and force the tires back down to grip using their bodies contact points to bring it back. This is what Marco Simoncelli may have been attempting to do during his fatal accident.

    This is a extreme lowside save (not SIC's) :

    | œ Orchid Euro Importation œ |

    Currently driving or working on too many cars...
    | '93 Fox 16v - PVW | '99 Greenland Polo Diesel | '89 Rallye Golf | '85 Scirocco Storm RHD - For Sale | '83 Golf GTi RHD | '75 Swallowtail |
    | '76 Alfa Romeo Spider | '99 Lupo 1.4TDI-S | '82 Caddy D | '85 VW LT35 N.S.T. | '90 Jetta 8v | '96 Volkswagen LT35D | '02 GTI 337 | '03 GTI 20v |
    | '09 Aprilia RS125 | '81 Kawasaki AR80 | '59 NSU Quickly | '64 Honda Cub C65 + '65 C105 |
    | Trek Madone 6.9 |

  22. Member clutchrider's Avatar
    Join Date
    Dec 10th, 2010
    Location
    Connecticut
    Posts
    3,889
    Vehicles
    2012 GLI
    04-24-2012 08:02 AM #3242
    Why do only minivans, SUVs, Trucks have their back glass tinted? I realize every state has tint laws but why do I not see sedans, coupes, hatchbacks come from the factory with tinted rear windows?



  23. Member
    Join Date
    Mar 25th, 2009
    Location
    Fairfax, VA
    Posts
    1,839
    Vehicles
    04 M3, 99 A4 2.8
    04-24-2012 08:26 AM #3243
    Quote Originally Posted by clutchrider View Post
    Why do only minivans, SUVs, Trucks have their back glass tinted? I realize every state has tint laws but why do I not see sedans, coupes, hatchbacks come from the factory with tinted rear windows?
    Not 100% sure but I think tint laws are less restrictive in general for SUVs, so manufacturers can sell them with tint stock, whereas sedans they are usually more restrictive.

  24. Member pinktshirt's Avatar
    Join Date
    Jul 25th, 2007
    Location
    Jerusalem/Orléans(FR)
    Posts
    428
    Vehicles
    VW 2.oh?
    04-24-2012 08:28 AM #3244
    Springs, shock absorbers, dampers, coil-overs, wtf?!

    someone please clarify the basic function of the essential suspension components please?

  25. Member MrMook's Avatar
    Join Date
    Dec 2nd, 2006
    Location
    Brooklyn, NY
    Posts
    4,085
    Vehicles
    o_O
    04-24-2012 09:00 AM #3245
    Quote Originally Posted by pinktshirt View Post
    Springs, shock absorbers, dampers, coil-overs, wtf?!

    someone please clarify the basic function of the essential suspension components please?
    Springs
    Support the car, and absorb impacts.

    Dampers
    Shocks and struts are both dampers. They control how quickly the spring is allowed to compress and/or rebound during and after an impact. A damper is basically a piston in a sealed cylinder filled with fluid (gas, air, oil). As the piston moves up or down with the movement of the car, the gas is pushed through passages (valves) at certain rates to control how fast or slow the piston will move. Performance models have adjustable damping in one or both directions (compression and rebound).

    Coilovers
    technically a normal shock/spring setup could be called a "coil over", since the coiled spring does fit over the strut, but this term typically refers to height-adjustable shock/spring assemblies. The body of the strut is threaded to allow the lock ring to be spun up or down, changing spring height, and ultimately the cars ride height. Note the threaded body:



    Cup Kit
    Cup Kits are paired spring/strut packages, but they are essentially a strut and a spring. Most cup kits are sold to lower cars by an inch or two, and often contain shorter springs, and stiffer damper valving. The term refers to cup series racing, where cars have to run the same gear, so it's sold as a kit.

  26. Member P-Body's Avatar
    Join Date
    Mar 17th, 2007
    Location
    Toronto
    Posts
    4,913
    Vehicles
    11 Sportage, 13 Optima
    04-24-2012 09:09 AM #3246
    Hypothetical no one has ever really explained to me, and I know a dealership won't give me a straight answer on:

    I lease a vehicle for 4 years, sticker price is 30k. Regular old lease, at the end I have option to buy the car or give it back.

    Residual is 15k.

    As lease end approaches, do some homework and realize that the vehicle is worth 20k on the open market.

    ...

    The question is - can/does this 5k difference in my favor be used if I want to negotiate pricing on another car to buy? I know if it was the inverse and the car was actually worth 10k, you would obviously walk away after the lease, but I'm asking more from the standpoint of a dealership - do they use stuff like this to try and keep you in another car?
    Quote Originally Posted by teklord69 View Post
    Scenario: Uphill on two lane hwy. You need to pass and overtake a slower vehicle. That 151 torque won't let you. You will hit an oncoming car the opposite side if you do.

  27. Senior Member StormChaser's Avatar
    Join Date
    Jan 3rd, 2000
    Location
    Galesville, MD
    Posts
    20,082
    Vehicles
    2006 Volvo V50, 1993 RX-7 R1, 1980 Hatteras 53MY, 2002 Grady White Release 283, 1958 Mohawk 14
    04-24-2012 09:15 AM #3247
    You'd probably have to buy it and flip it. The dealer won't give you the difference.
    Dave
    Demokratically Elekted Minister of Ginger Affairs and Fist Dates; Orakle of the Weathers; Creeper Extraordinaire of the Independent People's Republik of Offtopikstan
    Quote Originally Posted by Biz View Post
    If Chilledman and Stormy won't hit it, you know it's gone rancid.

  28. 04-24-2012 11:30 AM #3248
    I would go to the dealer you leased it from or any other dealer. depending on what bank did the lease and how the lease is built could go a couple different ways. I know at my work we work it just like a normal trade, if the value is great bonus for you if not tough luck. Now when we get say Honda lease's turned it aint a thing I can do with them but say hey go drop it off at the honda place

  29. Member efrie's Avatar
    Join Date
    Mar 19th, 2008
    Location
    Arkansas
    Posts
    3,840
    Vehicles
    2000 7.3PSD, 99.5 7.3PSD, 1998 4.0L XJ
    04-24-2012 08:39 PM #3249
    What kind of power gains will headers add to a 5.0L (302) with just an air intake?

    I'm getting the grumble on in my truck here shortly.

    Straight pipes from headers to Flowmaster 40's. Should be entertaining.

  30. Member Assle's Avatar
    Join Date
    Oct 16th, 2003
    Location
    Blackacre
    Posts
    14,239
    Vehicles
    '98 L36 Regal
    04-24-2012 09:33 PM #3250
    By headers I assume you mean standard shorty headers? If so, you're looking at 5-10hp in most cases. Long tubes will net ~20 over stock. Bear in mind the engine is a system so more can be gained when other mods are done to complement the headers.

    Anything performance-wise done to either of your Powerstrokes? Got any pics?
    "Sometimes wrong is worth the funny." - Billy Gardell

  31. 04-24-2012 09:40 PM #3251
    Quote Originally Posted by JUSTINCASE1021 View Post
    why were some 2002 golfs called the "337" ???
    it was a special edition GTI, 337 was the original order code for a GTI and this model had some special seats and wheels, I believe.

    Most of it was then carried over to the GTI 20th anniversary (with different wheels) the next year.
    Mustang ownership: cruising at 1500 RPM: oops time to upshift!

  32. Member efrie's Avatar
    Join Date
    Mar 19th, 2008
    Location
    Arkansas
    Posts
    3,840
    Vehicles
    2000 7.3PSD, 99.5 7.3PSD, 1998 4.0L XJ
    04-24-2012 10:24 PM #3252
    Quote Originally Posted by Assle View Post
    By headers I assume you mean standard shorty headers? If so, you're looking at 5-10hp in most cases. Long tubes will net ~20 over stock. Bear in mind the engine is a system so more can be gained when other mods are done to complement the headers.

    Anything performance-wise done to either of your Powerstrokes? Got any pics?
    One of them has injectors + turbo + 4" exhaust + custom tune.

    The other just has tune + 4" exhaust.

    They both have built transmissions from Brian's Truck Shop (google it).

    The 2000 model was tuned and built by BTS. The other one is an early 99 which means it has the smaller turbo, different oil setup, etc. It's the red one and just has tune and exhaust. The 350 has a tune from DP tuners, other truck has it's tune from Brian's Truck Shop, and the guy learned how to tune from DP tuners.

    2000 F250 7.3L


    1999 F350 7.3L

  33. Senior Member SSLByron's Avatar
    Join Date
    Jul 29th, 2004
    Location
    Annapolis, MD
    Posts
    34,943
    Vehicles
    '13 Focus, '08.5 MS3, '97 Wrangler, '94 and '90 Miatas
    04-24-2012 10:30 PM #3253
    Quote Originally Posted by Shmi View Post
    Not 100% sure but I think tint laws are less restrictive in general for SUVs, so manufacturers can sell them with tint stock, whereas sedans they are usually more restrictive.
    It has to do with laws that govern tint used for cargo areas vs. passenger areas, and of course it all varies state-to-state. A lot of the laws went on the books long before SUVs were popular as people-haulers.
    Quote Originally Posted by Turbio! View Post
    Turbio logic: the logic you need, not the logic you want.
    http://www.speedsportlife.com press vehicle(s) this week: None.
    Twitter: @SSLByron, @SpeedSportLife

  34. 04-25-2012 05:29 PM #3254
    The 337 had recaro seats, 6-speed manual, different springs, some body molding stuff, and a few other appearance items. 1500 were made for the U.S. When you factor in accidents, ricers ruining them with black wheels/mesh/airbags/etc, it's safe to assume that maybe half the original amount are left.

    My question for the thread is:

    What exactly is a "tune-up?"
    www.facebook.com/slimdownsarasota - best page on the interweb by far!!! Check it out and become a fan!!!

  35. 04-25-2012 05:33 PM #3255
    My mother's 2004 Mercedes E320 4Matic went in for an alignment at Town Fair Tire. The guy said that he couldn't complete the alignment because the car needed two camber bolts. I asked him if he would replace the bolts if I ordered them online, but he said "sorry, we can't do that". Why is this, and do I have to bring the car to the dealer? Will an independent MB shop do this?

+ Reply to Thread
Page 93 of 128 FirstFirst ... 43 83 89 90 91 92 93 94 95 96 97 103 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts