Sale: New VR6 Cams, Pistons, Timing Chain Kits, Gaskets, Giac Chips, Valve springs, Lifters,Clutch

[FourSeasonTuning.com]

All Items Include Free Ground Shipping in the lower 48 states

1.8T Clutch Kits $314.95 (228MM Sachs VR6 Clutch Kit 14 pound Cast Steel Flywheel W/ Starter ring gear Includes 6 flywheel and pressure plate bolts, Alignment tool as shown)

1.8T 1.9 TDI 2.0 Single Mass Clutch W/ Cast Steel 14 LB Flywheel $314.95

1.8T 1.9 TDI 2.0 Single Mass Clutch W/14 LB Cast Steel Flywheel $324.95

1.8T 1.9 TDI 2.0 Single Mass Clutch W/ Cast Steel 22 LB Flywheel $339.95

1.8T Stage 1+ Clutch Kit W/ Flywheel $425 ( Includes 228MM Sachs Pressure Plate, Clutchnet Disc w/ Steel covered 6 spring Hub, ESS 14 lb Flywheel, includes flywheel & pressure plate bolts, Sachs T/O bearing and alignment tool. Rated at 300 TQ at flywheel.

1.8T Single Mass Clutch W/ ESS Cast Steel Flywheel

1.8T Stage 2 Clutch Kit W/ Flywheel $539.95 ( Includes 228MM Clutchnet Yellow Pressure Plate, Clutchnet Disc w/ Steel covered 6 spring Hub, ESS 12 lb Flywheel, includes flywheel & pressure plate bolts, Sachs T/O bearing and alignment tool. Rated at 375 TQ at flywheel.

1.8T Stage 2 Clutch W/ Cast Steel Flywheel

Techtonics 24V 264/260 cam set $725

ARP VW 12V VR6 COMPLETE HARDWARE KIT $389.85

Autotech 262 (includes Cam alignment tool) $254.99

Autotech 262 & INA German lifter set (includes Cam alignment tool) $344.95

Autotech 262 & Supertech H/D Spring set (includes Cam alignment tool) $369.95

Cat Cams 261 $440

Cat Cams 263/264 $440

Cat Cams 266 $440

All 12V cams sets are $345. Free Ground shipping on all parts In the Lower 48 states
Direct purchase links below.

Eurospec Sport 268

FST 256 NA Regrind Cam Set

FST 256 FI Regrind Cam Set

FST 266/256 Turbo Model Regrind Cam Set

MKIV,MK4 GIAC Chips are $375

OE German Lifter sets of 12 are $100

Supertech H/D Spring set of 12 $120

12 INA GERMAN LIFERS AND Supertech H/D Spring set of 12 $195

VR6 TIMING CHAIN SET $210.00 (Single Upper Chain AFP)

VR6 TIMING CHAIN SET $210.00 (Single Upper Chain AFP)

02J Peloquinn Limited Slip Diff $775 shipped

Sachs VR6 Clutch Kit $199.99 shipped

Autotech L/W Steel Billet Flywheel $230 shipped

Complete 12V VR6 German Headgasket Sets includes MKIV Headgasket upgrade. $110 includes early valve cover gasket (Fits MKII and MKIII only)

Complete 12V VR6 German Headgasket Sets includes MKIVHeadgaskt upgrade. $110 (includes late valve cover gasket) Fits MKII and MKIII only(pictured below)
MK4 HEAD GASKET 169.99

German Head bolt set of 20 fits all 12V VR6 $45.99

MKIV Headgasket (Elring or Reinz) $50

12V VR6 Engine Block Gasket Set $70
--------------------------------------------------------------------------------------------------
Visa Mastercard Discover and American Express can be accepted via Paypal without registration.

California residents will be charged 8.00 % sales tax.

http://www.FourSeasonTuning.com
The current site only has a fraction of the parts listed that we carry.Please contact us if the items you seek are not on the site. Competitive pricing, Fast shipping, If you see a lower price let us know, chances are we can work with you.
Questions at 714-997-5842
Email is better than IM
sales(AT)fourseasontuning.com*

Thanks for looking.
James

AKA wld101turkey

Prices subject to change without notice.

[FourSeasonTuning.com]

1.8T 20V VALVE COVER GASKET $39.95 SET INCLUDES CAM SEAL (ELRING OR REINZ).
1.8T VALVE GASKET

$279.95 Autotech 1.8T Intake Camshaft New chill cast Billet, Includes Cam Sprocket as shown.
1.8T Autotech Intake Camshaft

1.8T Timing Belt Kit (4 Piece) $149.95 Fits VW/AUDI Transverse Mounted
1.8T Timing Belt Kit

1.8T Timing Belt kit (6 Piece) $199.95 Transverse Mounted 6 Piece Timing Belt kit Timing Belt kit Consists of: (1)Timing Belt,(2) Dampener with Roller (3),(4) Water pump with metal Impeller (5) Thermostat (6) Thermostat 0-Ring
1.8T Timing Belt Kit (6 Piece)

FST 1.8T TIMING BELT KIT (COMPLETE KIT 15 PIECE (transverse mounted) $274.99 FST 1.8T COMPLETE Timing belt KIT.THIS IS A COMPLETE TIMING BELT SERVICE KIT.(1)WATER PUMP WITH METAL IMPELLER,(2)VALVE COVER GASKET SET,(3)CAMSHAFT ADJUSTER TENSIONER SEAL KIT,(4)1.5L PENTOSIN G12 COOLANT,(5)SERPENTINE BELT.(6)THERMOSTAT,(7/8)TIMING BELT TENSIONER WITH IDLER ROLLER,(9)TIMING BELT TENSIONER ROLLER,(10)THERMOSTAT,(11)THERMOSTAT COVER.(12)THERMOSTAT O RING,(13/14) 2 CAMSHAFT SEALS (not shown in picture),(15)CRANKSHAFT SEAL PULLEY SIDE
1.8T Timing Belt Kit (15 Piece)

Eurospec Turbo Head Bolt Kits Set of head bolts for Audi A3/A4/A6/TT 00-05, VW Golf/Jetta 99-04, NB 98-04 w/1.8 5V 06A/06B block Eurospec's new high-strength Turbo-Bolt program. It is a non-stretch alternative to the inconsistent clamping ability of the infamous stretch bolt. Made of SAE 5135 alloy to a resistance of 12.9 and a hardness of 41 HRC
Eurospec Turbo Head Bolt Kit

Modified by FourSeasonTuning.com at 4:16 PM 2-19-2010

[wld101turkey]

bump

[anotherVR6]

Do you guys a shop/mechanics to install these parts, or some of it.

[asphaltvr6]

bump

[evnelson]

If i wanted to get as much power out of my 12v naturally aspirated what would you recommend on getting.

[FourSeasonTuning.com]

Im sent

[clock]

Quote, originally posted by evnelson »

If i wanted to get as much power out of my 12v naturally aspirated what would you recommend on getting.

Would like to know the answer to this as well, I already have an intake/exhaust and am trying to find other power upgrades, but I can't seem to find any decent info.

[FourSeasonTuning.com]

Port and polish Cyl head
port & polish lower and upper manifold runners
Old velocity TB were dyno tested for 5-6 hp
Cams
Chip
Exhaust
CAI

[the_butcher]

Quote, originally posted by evnelson »

If i wanted to get as much power out of my 12v naturally aspirated what would you recommend on getting.

x2

edit: guess I should have finished reading every post. Oops!


Modified by mj500 at 3:40 AM 1-31-2006

[anotherVR6]

'better start buying stuff for my car, one part at a time....

[asphaltvr6]

great products should be ordering mine by the end of the week

[TexasCorrado]

cams for 24v?

[theblackgti]

x2 about 24v cams like the ones cat cams has on their website.

[wld101turkey]

Can check avail and pricing tomorrow.

[FourSeasonTuning.com]

What grinds did you want? Several to choose from here
http://www.catcams.be/index.htm

[VR6CJ]

I'd be interested in 24v cams too.....but there's no dyno graphs that I have seen. Any suggestions? 256's maybe for light to light action? I need to do more searching.

[FourSeasonTuning.com]

Im sent

[BLACK BOX]

BUMP for a great guy and impeccable customer service!

I was in a serious bind this weekend and James
went completely out of his way to make things happen.

Contacted the shop @ 430pm sat, picked up the
goods this morning(sun) @ 9AM...

FourSeasonTuning deserves your business.

[groupracer]

got my Autotech 262's installed yesterday that I got from you guys. What can I say, but, FANTASTIC! Thanks for a great deal Four Seasons Tuning!

[jayvee203]

if your shop does install atuff how much to throw on the o2j LSD ?

[FourSeasonTuning.com]

Im sent

[Andrew 16v]

Will that clutch at the top work with my 2000 1.8t?

[FourSeasonTuning.com]

Yes.

[Andrew 16v]

Just got it installed! Thanks for getting it to me! Pleasure doing business with you.
for Four Season Tunning!

[FourSeasonTuning.com]

Your welcome.

[v_dubrider]

pm'ed..

[FourSeasonTuning.com]

replied

[midnightbluegli]

bump to keep this topic watched

[zero666cool]

got a quick question, I've bought stuff from you before. Do you carry titanium piston rings for 12V VR6, also, the headgasket set, I have a newer engine 97, but I have an alum valve cover gasket, do I need to get the set that comes with older style valve cover gasket?

Thanks,

[VR6TurboProject]

Bump for the best seller i've ever done business with.

[wld101turkey]

Im sent

[wtjetta4]

only have VR6 chips?

[wtjetta4]

i cant find it on the website. i am looking for a 93 octane GIAC chip for an AWW. what kind of price would that be?

[FourSeasonTuning.com]

$495