Sale: New VR6 Cams, Pistons, Timing Chain Kits, Gaskets, Giac Chips, Valve springs, Lifters,Clutch

[FourSeasonTuning.com]

Same as stock 81MM ones.

[SVTDanny]

I need a headgasket and head bolts for an R32. Can you get them/what's the price?

[FourSeasonTuning.com]

Im sent

[B3M3nkey]

been considering a rebuild on an OBD1 VR6. All 12 valves bent. Would I be good to go from the rods up you think. No visible catastrophic damage to pistons hardly any marks at all. With new crank bearings I'd like to know if I can use the original rods for the rebuild, looking at your 2.9L Piston Set, Maybe a 3.0L (haven't done enough research for 3.0l yet).

[FourSeasonTuning.com]

Im sent

[SoCal_GLI]

pm's back and forth

[esoteric]

[zrp]

just wanted to say thanks to james for all his help. awsome guy great pricing, fast shipping and very knowledgeable.

definatley would recomend him for your one stop vw needs.

[mktrizzle]

i want those pistons. Dang i wish i had 450 bucks.

[FourSeasonTuning.com]

I have some others in 82MM with rings, pins and clips for $420 shipped.

[mktrizzle]

Quote, originally posted by FourSeasonTuning.com »

I have some others in 82MM with rings, pins and clips for $420 shipped.

Can you send me more information?

[FourSeasonTuning.com]

IM sent

[splitsecond]

How about a GIAC chip for an Audi TT?

[Suti]

Hi,

I need GIAC chip for my Golf Mk3 VR6 OBD I

I've Techtonics 288 Cam, 83.5mm Pistons, 12.8 Compression Ratio, Tezet Headers, freeflow exhaust, oversized valves and ported head,...

My ECU number is: 021 906 258 A

In Istanbul we're using 95 octane gas


Modified by Suti at 2:58 PM 1-11-2008

[FourSeasonTuning.com]

Giac wont make a MK3 custom chip. I could however get Techtonics to make one for you.

[hornetracer8]

Just ordered a GIAC 268 and a Chain kit.
Did you get all the info?
Thanks in advance!!!!

Great prices!

[FourSeasonTuning.com]

Chains went out today.

[souly4him]

Are the INA lifters you sell the lightweight ones?

[FourSeasonTuning.com]

The ones with the 050 as the first three digits of the part# are the LW ones. Here is a 12V set.

http://fourseasontuning.com/?product=161

[souly4him]

Thanks!

I see a package deal for the presumably "034" and the hd springs, do you have a package for the "050" lifters and the HD springs?

Thanks again, best prices I've seen in a long time.

[mjgvw16v]

bump for a good seller

[RedWabbitVR]

Will the 36mm exhuast and 42mm intake valves fit side by side or do you have to get a smaller intake valve to fit them together?

It's a 12 valve vr6 from a 95 passat



Modified by RedWabbitVR at 12:20 PM 2-17-2009

[FourSeasonTuning.com]

They will fit with new seats. The 41 -36 is a good combo and so is the 41-35. The 35MM exhaust valve allows you to reuse your existing seats if in good shape. Anything over 1MM requires new seats on the 12V.

[RedWabbitVR]

as long as they fit I'm not worried about new seats I plan on putting some boost to it and saw good results from other engines that I used oversized valves in. Thanks will be putting these on the parts list for when I start rebuilding the engine within the next few months gotta finish the body. before the engine

[R32dreamer17]

ooooo

[USOPHUNKE]

just sent payment for a.t 262, springs and tool. Thanks for having such great prices.

[dubluvin1987]

is it required to run H/D valve springs for a 262 cam in a VR?...i was planning on runnin 262 cams with the "lightweight" lifters...is this ok?...bump for great prices

[FourSeasonTuning.com]

Not required but a good idea on the springs. The LW lifters work with cams.

[dubluvin1987]

well i do know its a good idea, but i already have the head ready to be thrown on the engine and the cams and lifter can be put in without tearing into the haed again..so id rather not for now...just seein if just the lifters and the cams would do ok...thanks for the info ...shuld be ordering my 262's with lifters very soon

[FourSeasonTuning.com]

IM's replied

[klungemonger]

IM sent...
Hi how's it going...I'm new to the VDub scene, just got a 2001 GTI VR6. It has almost 150K on it and I hear some light clacking sound at idle, from what I read it may be timing guides worn out? I'd like to just do a complete timing chain overhaul with a kit like you are selling but don't know what one I need. Any guidance you can give? Thanks.

[FourSeasonTuning.com]

Replied

[spooln6]

pm sent

[FourSeasonTuning.com]

Replied

[jordan425]

Hey I definitely need that timing chain kit and clutch kit
but i need to know
would they fit
01 jetta glx vr6 2.8L 12v?