Calling all Brevard County

**V-dubbulyuh** · 02-10-2012 07:15 AM

Originally Posted by TOYRACR

Just stopin in to say hi. Have a good weekend all.

What's up with this? First Ryan then you! Glad you're good though.

**IRDangerDave** · 02-10-2012 08:39 AM

Originally Posted by GTIVWMK2

anyone wanna take a guess at what a 83 Jetta coupe turbo diesel would be worth in fair to excellent condition?

It's worth my 16V 4-door + $5. Where do I sign?

**Prof315** · 02-12-2012 06:42 AM

Well I won't be turning the maroon Corrado in the garage into my street car after all.... I scored a 92 SLC Friday night. It doesn't run, the engine wiring is shot and it needs an ignition switch. The paint is pretty faded and ugly (Tornado Red) but should clean up a bit with a good wash, buff and wax. That's the bad. The good is that the body is very straight and the interior is easily an 8.5! It even still has the factory floor mats!

**R32peterb** · 02-12-2012 07:53 PM

glad to here you found a car man

now get it up and running and come out to the meet

**Prof315** · 02-12-2012 08:28 PM

Originally Posted by R32peterb

glad to here you found a car man

now get it up and running and come out to the meet

Believe me I'm gonna do it as fast as I can. Unfortunately first I need to finish gutting the blue car, get rid of the shell, get the new one here from Mims, move the maroon shell out of the garage and into the driveway. And oh yeah I also have a job and family that eat up a lot of my time.

On a totally different subject, Anybody want an Autopower Bolt in roll cage for a MK3 Golf or GTI? I'll let it go cheap..... really cheap.

**JUICE_B5** · 02-12-2012 08:55 PM

Hey Jeff, my buddy like to know what is really cheap

He will buy tomorrow if the price is rigth

**V-dubbulyuh** · 02-12-2012 09:28 PM

Originally Posted by JUICE_B5

Hey Jeff, my buddy like to know what is really cheap

He will buy tomorrow if the price is rigth

I'm also curious what is really cheap.

**Prof315** · 02-13-2012 05:42 AM

Originally Posted by V-dubbulyuh

I'm also curious what is really cheap.

I have the whole thing it's never been installed and I'd like to get $200 for it. They are over $1000 shipped from autopower.

**V-dubbulyuh** · 02-13-2012 01:09 PM

^ Responded.

**CDJetta** · 02-14-2012 12:48 AM

Got to drive the TDI around the block but it was just a test run. Fixed a few problems and went to put the downpipe back on and the cheap vband clamp I bought from silicone intake broke. Don't buy their clamps. They are crap. If anybody has a 2" vband I'd greatly appreciate it if I could use it.

**IRDangerDave** · 02-14-2012 11:01 AM

Originally Posted by Prof315

Well I won't be turning the maroon Corrado in the garage into my street car after all.... I scored a 92 SLC Friday night. It doesn't run, the engine wiring is shot and it needs an ignition switch. The paint is pretty faded and ugly (Tornado Red) but should clean up a bit with a good wash, buff and wax. That's the bad. The good is that the body is very straight and the interior is easily an 8.5! It even still has the factory floor mats!

woot!

**uamadman** · 02-14-2012 11:02 AM

**** ... I have a 3" and a 4" v-band clamp .. sorry

Also interested in that roll cage ... if its not already sold id consider it for my mk2 if it would fit.

**Prof315** · 02-14-2012 11:52 AM

Originally Posted by uamadman

**** ... I have a 3" and a 4" v-band clamp .. sorry

Also interested in that roll cage ... if its not already sold id consider it for my mk2 if it would fit.

sorry Kish it's gone....

**r32-power** · 02-14-2012 12:27 PM

sounds like JRock is building himself a race car

**V-dubbulyuh** · 02-14-2012 01:10 PM

Originally Posted by r32-power

sounds like JRock is building himself a race car

As I age I'm realizing that self preservation is something I should be more into.

**CDJetta** · 02-14-2012 01:30 PM

I'd do a weld in cage instead of a bolt in cage but that's just me. :p Don't they require weld in cages for most sanctioned racing? Not that you are doing any sanctioned racing but I figure they wouldn't require it if it didn't meet some safety standard.

**Prof315** · 02-14-2012 03:39 PM

Originally Posted by CDJetta

I'd do a weld in cage instead of a bolt in cage but that's just me. :p Don't they require weld in cages for most sanctioned racing? Not that you are doing any sanctioned racing but I figure they wouldn't require it if it didn't meet some safety standard.

Actually the autopower bolt in cages are both SCCA and NASA certified. That being said I will only drive race cars with welded in cages.

**Diosauce** · 02-15-2012 12:45 AM

Do you guys still have meets at Beefs?

**R32peterb** · 02-15-2012 07:40 AM

yes we do, and we meet tonight

**CDJetta** · 02-15-2012 10:55 AM

Do want!

http://www.youtube.com/watch?v=56XL0...ature=youtu.be

**R32peterb** · 02-15-2012 04:28 PM

see everyone tonight at the meet

**R32peterb** · 02-16-2012 06:02 PM

hey guys, tomorrow night the local aircooled guys are meeting at Sonic in Cocoa and would like for us to come out. it starts at 6:00, I hope to see you guys make it out

**AHM** · 02-16-2012 07:48 PM

Originally Posted by R32peterb

hey guys, tomorrow night the local aircooled guys are meeting at Sonic in Cocoa and would like for us to come out. it starts at 6:00, I hope to see you guys make it out

Planning to be there.

**GTIVWMK2** · 02-19-2012 12:45 AM

?? quite.

**GTIVWMK2** · 02-19-2012 12:46 AM

oh ya for those that don't keep up with the facebook end of things.

**CDJetta** · 02-19-2012 11:32 AM

Sold it James?

Got the TDI able to drive around now. Not making boost for some reason though. I think I killed the MAP sensor. I dropped it once while it was out of the car.

**GTIVWMK2** · 02-19-2012 04:44 PM

that could potentially be a bad thing. No not sold yet. gotta get it up and running first. It has sat for 7 years gotta hope the fuel in the tank hasn't completely gelled up. replace the fuel filter and probably glow plugs before it will fire up. then gotta get the back drivers side wheel to break loose and spin freely. clean out the interior. sat in a field for those 7 years and Mice had taken up residency. So because of mice I have to check wiring and make sure that it's not ruined either. did I mention it's an imported coupe turbo diesel? I think it has rear fogs definitely has rear side markers. got a lot of stuff to do to this car before i can try and sell it.

**uamadman** · 02-19-2012 10:48 PM

James call me tomorrow if i forget to call you.

Moving Mulbury Tuesday to get her fixed for me. Hoping to DD her for a bit. x's fingers that shes not a biotch.

**Prof315** · 02-20-2012 08:04 AM

Anybody interested in a set of heim jointed tubular lower control arms with ball joint pins? very similar to these: http://scch-heads.com/viewpart.php?id=5 but fully adjustable. They'll fit a MK2 Mk3 or Corrado chassis.

**uamadman** · 02-20-2012 10:09 PM

Possibly ... I think i really need those actually for my build... call me tomorrow and lets discuss.

**CDJetta** · 02-20-2012 11:54 PM

Anybody have a vag-com cable I can borrow for a day or two?

**CDJetta** · 02-22-2012 01:02 AM

Nobody? How about I lend you 300 bucks so I can borrow the cable if that's an issue of not trusting.

**V-dubbulyuh** · 02-22-2012 06:44 AM

^ When do you need it? It is going to be hard trying to coordinate a time other than weekend.

**GTIVWMK2** · 02-22-2012 07:26 AM

Pete has one.....

**R32peterb** · 02-22-2012 08:55 AM

I do have one, just not sure how we would meet up with each other

VWVortex

Thread: Calling all Brevard County

Thread Tools

Search Thread

Display

still doing meets ate beefs?

FV-QR

FV-QR

FV-QR

FV-QR

Posting Permissions