same 5x112 bolt pattern...centers needed to be bored out...i forget the specs on the bore though...sorry no pics, but they look great imho.
#1
Are any of you rolling on AMG or any Mercedes rims? I'd love to see pics..and what does it take to fit them on a B5?Thanks.
#2
same 5x112 bolt pattern...centers needed to be bored out...i forget the specs on the bore though...sorry no pics, but they look great imho.
APR Stage 2 | UR-Milltek TBE | Carbonio | S3 IC | AWE TOP & Hoses | DG Springs | Euro Lip | S3 SS | .:R Tails | RSe12 |
G/S/E
#5
quote:
19" AMG CL wheels
![]()
Looks tight
![]()
Current: Golf-R Rising Blue 4-door loaded, Mazda MX-5, several mods #333
Former: Audi D2 S8 Ming Blue
Former: VW mkV GTi United Gray, B6 A4 Avant 1.8TQ Atlas Gray
B5 A4 1.8TQM Santorin Blue J31-K04 Beauty
B5.5 Passat TDi, Euro model...
#6
I was going to get Carlsson rims for the A4, but it never panned out. Those wouldnt be bad. I saw a guy with Mercedes rims on apearl white A4. It didnt look terrible, but I wouldnt want the Mercedes three pointed star on my wheels![]()
#7
Ah so I now know that 18"s will fit, how about the RS II 8 x 18 ones that audi sells..
#9
AMG wheels are absolutely beautiful . . . when they're on a Mercedes.R. Jason Coulston
#10
quote:
AMG wheels are absolutely beautiful . . . when they're on a Mercedes.R. Jason Coulston
![]()
If you Told me my Porsche wheels didnt belong on my old GTI I'd laugh at you. I'd throw AMG wheels on my Audi too..if a wheel fits right, and look good and go with the lines of the car I'm all for it. Who cares if they are "Exclusive" for a certain brand car?! I want to do either AMG Aero II Monoblocks or Carlsson 1/6 Evo diamond on my car, both of which are "Mercedes Only"wheels.
#11
Im looking for some pictures of the 17x7.5/8.5 AMG wheels on an A4.
abf_jetta on Instagram
Buy it. Build it. Drive it.
#12
holy **** this thread is old
#13
These are 18x8.5, just imagine them an inch smaller
![]()
Last edited by jmullen324; 05-03-2012 at 05:47 PM.
#14
I found this thread in my search. Figured I'd use it rather than start a new one about the same thing. I'm looking for a picture of the 5 spoke wheels. I should have been more specific.
abf_jetta on Instagram
Buy it. Build it. Drive it.
#15
the pirate used to run those sizes, I'll see if I can find a pic somewhere
![]()
Last edited by NeedingAnAudi; 04-27-2012 at 06:43 PM.
#16
Awesome! Thanks for the help guys. I must say it's pretty nice to be out of the mk2 forum for awhile.
abf_jetta on Instagram
Buy it. Build it. Drive it.
#19
I didn't need to bore out any holes or use any spacers or even get longer bolts, just hubcentric rings...
Nankang NS-II's
18x8.5 215/40-18 for fronts
18x9.5 225/40-18 for the rears
![]()
#22
#23
I brought it back for pictures.
abf_jetta on Instagram
Buy it. Build it. Drive it.
#24
Also I second you don't have to bore out the centers. They are actually larger and all you need is some hubcentric rings. If you buy a set from a user more than likely they will have the rings too.
Last edited by L33k; 05-02-2012 at 02:25 PM.
#27
#28
close, the ones im getting have smaller holes and more face, but still the 5 spoke monoblock design
#30
I just found that out when I picked mine up. What lug bolts did you use?
abf_jetta on Instagram
Buy it. Build it. Drive it.
#32
The ones I have dont seem to be long enough. guess I'll just order some longer bolts.
abf_jetta on Instagram
Buy it. Build it. Drive it.
#33
Came on vortex to get an answer to my problem, and what do you know the first thread title is exactly what i need. Hoping someone will know what im going through
I just bought some AMG wheels for the audi, i need to know where to get extended lugs for them. Ill need spacers for the rear or they wont fit. And for the front... for stance ;]
#34
Ecstuning.com has them, but try ebay first. 14x1.5 I think.
#35
i just dont know how long i need them, or how long the stock mercedes lugs are