Please only post for sale and wanted to buy items in this thread. They must be related to carbs/itbs/SEM's, all others will be deleted.
selling just the itbs, flange for the itbs and trumpets
all you need is the lower intake
USRT sells these for $1000
Modified by VRT at 1:47 PM 8-21-2006
1998 GSXR 750 ITB spacers, lasercut aluminum. $25 shipped to your door.
I have two available immediately, and can make more. These are lasercut aluminum spacers to space the throttle bodies 88mm apart, which is the spacing for 16v intake ports. All you need to do is have a shop weld on some extensions on the actuators, because when you space the throttle bodies apart, the levers are not long enough to actuate the next throttle body in line.
These were designed for my '98 GSXR 750 throttle bodies, and may/may not work on other GSXR bodies. You can get higher resolution images by following these links:
Here are some thumbnails, the top piece is the stock Suzuki spacer.
Modified by kalvinlk at 5:53 PM 8-16-2006
Modified by kalvinlk at 9:49 PM 8-18-2006
FS: 16v Dellorto 40 16v carb set-up with ignition system
all have almost NO miles on them:
-rowland 16v intake manifold with spacers and rubber vibration gaskets
-dellorto 40 carbs jetted and tuned for a 2.0 16v
-4 green uni filters
-saab 900 vac advance dizzy
-carter fuel pump
-all fuel lines
-msd 6al ignition
this set-up starts and runs great, only reason i am selling is because i have an insane ITB set-up waiting to go on the car and i need to buy an SEM system, so these must go
bolt this set-up on in an afternoon and rip away sounding all street-bike [IMG]http://**********************/smile/emthup.gif[/IMG]
asking for 1200 obo
PLEASE IM me if interested
Quote, originally posted by the12for12 » FS:
16v throttle body with TPS [IMG]http://**********************/smile/emthup.gif[/IMG]
$75 shipped would be nice but I'll consider trades and offers
thanks for clicking,
Quote, originally posted by projectvwg86 » WTB 16v carbs or itbs, gimmie a price, i need a full setup, nothing missing
I think you may want to do a bit more research if you dont care if you get carbs or ITB's. You are at two opposite ends of the technology spectrum there! It's like saying I want a new car but I cant decide between a geo metro, and an Lamborghini Diablo.
still got these?
shot you a PM
Quote, originally posted by mahkra »
Webber DCOE 40's -- no manifold, only one filter, condition unknown. I rescued these and they appear useable, but I am not a carb expert by a long shot.
Asking $230 (shipped to the lower 48)
Modified by aircooled traitor at 3:32 PM 10-25-2006
hi, i have for sale tbs from 02 gsxr 600. if u don't know the details and sizes of them u can look it up in this BIKE TBS DIRECTORY
everything in the pics, tbs, injectors, harness included 75$ shiped
Brand new 32/36 DFEV for sale
i bought it thinking my current carb was junk. i put it on and had the same problems. then took it off and back in the box. I cant return it cuz "its used". i bought it for $270 ($330 after shipping ) and am willing to sell for $270 shipped OBO.
please some one be intrested. it was a costly mistake.
if your looking to carb you 8v, this is great! great power and sound gain. all you realy need is the manifold.
if you want pics i can get them
Modified by vee_dubb_gti at 9:00 PM 11-6-2006
..... ,___/ /___l ___\\_____
.......\__( o )_______( o )__/
WTP: someone get my itbs set up for a 16v.
i have gsxr 750's a uncut 16v mani and no time but a few dollars to play with. so what i would like is someone whos done this before to take it on for me. i will pay you, pay shipping both ways and pay you for any parts that i need but don't have yet. get back to me if your interested and let me know.
I am moving up to a class that allows Fuel injection, so I don't need these any more. These were purchased brand new from Weber about 1 year ago. They are OER 47mm carbs, which share all the parts with webers, and they're made in Japan. These carbs have been very good to me. They have less than 1000 total miles on them since new. Included in the package:
2 OER 47mm sidedrafts
Ported Rowland Manifold
Custom made linkage
Carter Fuel pump
Mr. Gasket regulator
Autometer fuel pressure gauge
The carbs have 42mm chokes in them right now, but I have a spare set of 40mm chokes that will be included in the sale, and a box full of jets and EM tubes
For all this, I'd like to get $1100
I also have an MSD programmable timing computer, and MSD adjustable timing control (you can adjust your static timing with a knob on the dash) and an MSD 6A box. This allows you to use the stock 16V distributor, and tune your advance curve the way you want it.
I'd like to get $400 for this setup.....its all wired and ready to go.
Modified by machschnelGTI at 9:21 PM 11-12-2006
Modified by machschnelGTI at 5:42 AM 11-13-2006
Modified by machschnelGTI at 11:09 PM 12-25-2006
Modified by machschnelGTI at 8:52 PM 12-27-2006
Modified by machschnelGTI at 8:52 PM 12-27-2006