For Sale- Wanted To Buy Thread

[aircooled traitor]

buy one from pierce manifolds. they are good people to do business with.

[psykokid]

Quote, originally posted by aircooled traitor »

buy one from pierce manifolds. they are good people to do business with.

couldnt find one on thier site, what do they run from them?

[a1maker]

SOLD

FS: MSD 6AL with RPM modules incld. * Used

Great for factory Fuel Injection, carburators or Megasquirt EFI conversions

Modified by a1maker at 6:13 PM 12-29-2006

[Diggatron]

034 EFI Stage Ic SEM for sale!!! I have it priced pretty cheap! It is Brand New, and never installed! Look here:

http://cgi.ebay.com/ebaymotors...ZWDVW

[Lowjack]

sold


Modified by Lowjack at 4:13 PM 12-3-2006

[chrisbmx68]

F.S. 2 8v carb intakes one is bre the other is a pierce? I Think. The pierce sits the carbs on an upward angle and the bre has them pretty much on a flat plane. Im looking to get $130 obo for each manifold. The bre one was really nicely ported out to 45mm the pierce is 40mm and just had some casting flash cleaned up.

Then I have a mtched pair of 48mm solex addhe side drafts.
looking to get close to $400

They are pretty rare solex bored these out to 48mm special for race teams. They are 99.9 complete appear to be in good shape aside from needing fresh gaskets.

190 air correctors
a04 emulsion tubes
135 main jets
60 idle jets
The jetting is just what I could figure out from misc stampings and some picturesi found. Im no carb expert.

p.s. these are dcoe spacing and will take weber dcoe air horns or air horns for 48mm weber downdrafts

[337GTiAndrew]

Some one scoop these up. Not mine but a pretty good find for the price

http://cgi.ebay.com/ebaymotors...QrdZ1

[a1maker]

SOLD

Megasquirt V2.2 board & Stimulator Both working and tested (see pics)
BBM fuel rail with fittings, 2.5 Bar FPR and it's mount
4 VW digifant injectors and wiring harness
Weber Redline TB with/ VW manifold adapter. Bosch TPS with contector.
Ford IAT sensor (needs a ford pig-tail contector)
Complete Harness with labels.
Printed manuals and a CD with Megatune.
Flyback board (not installed)

http://new.photos.yahoo.com/do...39851

$400 shipped


Modified by a1maker at 6:14 PM 12-29-2006

[autotragik b3attlewagen]

Looking to BUY a complete 8v Dual carb (40mm weber prefered) or ITB setup.

Manifold, carbs, fuel pump, pressure regulator, etc.
Let me know what you got...

[skidplate]

I've got a weber carb set up for sale. Looking to get $950 shipped

-Dual weber 40's
-air horns (polished)
-16v DCOE manifold (unsure of the brand)
-carter pump
-saab vacuum advance dizzy
-msd box

all it needs is linkage and maybe a FPR and you're good to go.


^I can get this sandblasted if needed. And powdercoated at an additional charge

^16v intake mani is also for sale but not included (obviously)

^They all look like the one on the left. Just a comparo of how they looked when i got them.

[2.0 Ho]

sold


Modified by 2.0 Ho at 11:44 AM 12-27-2006

[MoGtheMooGle]

I have a set of GSX-R 750 ITB's (with TPS) for sale. *`~-_SOLD_-~`*


Modified by MoGtheMooGle at 10:37 AM 12-15-2006

[vee_dubb_gti]

i have a new 32/36 weber. for pics go to the link in my sig

[nothingleavesstock]

i have a set of 40 side draft carbs with manifold and linkage for a counterflow 8v motor. i was told they came off a running car, but possible rebuild to make perfect-not sure. one banjo fitting is missing, but very cheap to get

$325 plus shipping obo

[machschnelGTI]

I need to get rid of these so the price has dropped. $600 for just the carbs and the linkage, $750 for the carbs and manifold. These are OER Racing 47mm carbs sold by Weber. I bought these brand new less than 1 year ago and have since decided that I no longer like my VW and bought a different race car. These carbs run awesome. Included with the carbs are a set of 40mm throats (the carbs have 42mm throats in them now) and a box full of jets and emulsion tubes. This is a smokin deal.

Modified by machschnelGTI at 9:01 PM 12-27-2006


Modified by machschnelGTI at 9:54 PM 12-27-2006

[The Infidel]

WTB: 16v Fuel rail and 3.5 fpr

[MK 1]

I am moving up to a class that allows Fuel injection, so I don't need these any more. These were purchased brand new from Weber about 1 year ago. They are OER 47mm carbs, which share all the parts with webers, and they're made in Japan. These carbs have been very good to me. They have less than 1000 total miles on them since new. Included in the package:

2 OER 47mm sidedrafts
Ported Rowland Manifold
Custom made linkage
Carter Fuel pump
Mr. Gasket regulator
Autometer fuel pressure gauge
The carbs have 42mm chokes in them right now, but I have a spare set of 40mm chokes that will be included in the sale, and a box full of jets and EM tubes

For all this, I'd like to get $1100

I also have an MSD programmable timing computer, and MSD adjustable timing control (you can adjust your static timing with a knob on the dash) and an MSD 6A box. This allows you to use the stock 16V distributor, and tune your advance curve the way you want it.

will it bolt up to a 16v head and do you still have all this for sale and if so, how much for all together including the MSD setup ?

Modified by MK 1 at 6:44 AM 12-30-2006

Modified by MK 1 at 6:46 AM 12-30-2006


Modified by MK 1 at 6:46 AM 12-30-2006

[Wraith04]

SOLD



Modified by Wraith04 at 11:52 AM 1-30-2007

[jazzman59]

I'm looking for 4 air horns for DCOE 45's.
Around 40mm (1,6").

Just like these

AH822
40 mm air horn for 45 DCOE

[nadir]

Super ;
wvrum wvrum )
great job! keep it like going

here u can se mine

and some adjustments

p.s. sorry for my bad english!


Modified by nadir at 4:05 AM 1-28-2007

[Agaeris]

Full race built 16v engine on ITBs, SEM...

Check it out:

http://forums.vwvortex.com/zerothread?id=3051977

[roly]

FS 034efi IIc with cd, no harness.
I had purchased it from JC@douglas last year, i never installed it.

$1050 shipped.

[TheGreenspanator]

WTB complete carburated setup for 8v, I'm officially done with CIS, cash in hand, PM or email Lauren: sxtyneon@yahoo.com

[Speed Racer.]

GSXR 1000 throttle bodies with everything- $130

CBR 600 throttle bodies with everything- $100

Modified by Speed Racer. at 12:58 PM 2-23-2007

[omra108]

WTB 4 180 weber air correctors

[hkk735]

FS: 16v ITb prototype manifold......

manifold and stacks only!!!! these use the toyota ITB's that Wizard-Of-Od was getting in. you will need to use an ABF waterneck, and 1.8T fuel rail w/ this setup.

$250 shipped to the lower 48


Modified by hkk735 at 6:48 PM 2-19-2007

[one.eightT03]

Quote, originally posted by roly »

FS 034efi IIc with cd, no harness. I had purchased it from JC@douglas last year, i never installed it. $1050 shipped.

sale pending to me

[Eric@SETuning.com]

WTB 8v complete itb kit or pieces

E

[roly]

Quote, originally posted by one.eightT03 »

sale pending to me

sold and delivered.

[337GTiAndrew]

For Sale. Package deal. Weber 45's, Stainless 60mm stacks, empi filters brand new, pierce manifold for 16v, 1.8L 16v head rebuilt with new valve seals, tt race springs, tt 288 race cams.

$2000 shipped anywhere in the 48 states.

also have a MK2 tt long tube race header $300

Edit:

Carbs $1200 Shipped
Head $400 Shipped
Header $300 Shipped.


Modified by 337GTiAndrew at 6:39 PM 3-5-2007

[337GTiAndrew]

Quote, originally posted by 337GTiAndrew »

For Sale. Package deal. Weber 45's, Stainless 60mm stacks, empi filters brand new, pierce manifold for 16v, 1.8L 16v head rebuilt with new valve seals, tt race springs, tt 288 race cams. $2000 shipped anywhere in the 48 states. also have a MK2 tt long tube race header $300 Edit: Carbs $1200 Shipped Head $400 Shipped Header $300 Shipped. Modified by 337GTiAndrew at 6:39 PM 3-5-2007

Carbs also come with abf water inlet and the custom altanator bracket to keep your ac.

[MkIIRoc]

I have a set of 40DHLA chokes, sized 32 mm. Looking to trade for 34's, or buy some 34mm chokes outright.

[mk2dubbin]

ive got a short 16v dcoe manifold that i wouldnt mind trading for a long manifold if someone wants the opposite... just lemme know. i believe my manifold is a pierce, and is factory tapped in the #4 runner for vacuum.

[Satur9]

Anyone have an ABA setup for sale??

[MkIIRoc]

SOLD


Modified by MkIIRoc at 12:25 PM 3-13-2007