For Sale- Wanted To Buy Thread

[vwaddicct07]

i need a 16v carb setup ASAP

[337GTiAndrew]

Quote, originally posted by vwaddicct07 »

i need a 16v carb setup ASAP

Im'ed ya

[g60manny]

Quote, originally posted by MkIIRoc »

FS- 2 side draft filters, just cleaned and oiled. They were on my DHLA 40's. How about $30 plus shipping (which should be cheap)

sent im

[RoadRunner219]

WTB: 1.8t or 2.0 fuel injectors

[VWralley]

g60 or 1.8t is what you need

[Mstadt]

NEED a manifold for a 2.0 16v with weber 42s.

[bowagon]

Looking to buy ABF intake manifold.

[Rev Jerry]

looking for motorcycle throttle bodies. Nothing imparticular.

[g60manny]

Quote, originally posted by MkIIRoc »

SOLD Modified by MkIIRoc at 12:25 PM 3-13-2007

thanks

[MkIIRoc]

Shweet

[PhantomDubs]

all sold.


Modified by PhantomDubs at 8:53 PM 4-25-2007

[1st_mk1]

I have a new BBM 8v fuel rail and some low mile(5k) digi injectors for sale. Offers over $100 plus shipping.

[Bad Bunny]

Where can I buy a 16v manifold new? For some 40 DCOE's.

[Mstadt]

Quote, originally posted by Bad Bunny »

Where can I buy a 16v manifold new? For some 40 DCOE's.

Rowland. Close to 3 with shipping to the states at least.

[euromaniac69]

hello!!! phantom dubs
e mail me at yus_009@hotmail.com
i want to buy itb´s

[euromaniac69]

hello!!! phantom dubs
e mail me at yus_009@hotmail.com
i want to buy your itb´s

[aspro]

TECHEDGE WIDEBAND - http://cgi.ebay.co.uk/ws/eBayI...&rd=1

[zerosanity]

Anyone have a 16V carb setup or pieces for sale?

[2whlmayhem]

For Sale : matching set of WEBER 45DCOE carburators. These originally came off a Porsche, then were used on my boys ol skool built volvo. They have been sitting for a little so could use a good cleaning. One carb is missing the inspection cover for the accelerator pump(easy to get). All moving parts move freely with no binding or play. Comes with air filter bases and extra chokes and jets. Paypal or local pickup only. New Port Richey, FL 34652. Chris 727-729-0777 $275 shipped
http://img337.imageshack.us/img337/7587/003by9.jpg

http://img408.imageshack.us/img408/7812/004oo6.jpg

http://img410.imageshack.us/img410/4903/005zh1.jpg

http://img408.imageshack.us/img408/4190/006vx1.jpg

http://img441.imageshack.us/img441/6751/007nc8.jpg

http://img82.imageshack.us/img82/6112/008bd1.jpg

Modified by 2whlmayhem at 3:05 PM 4-29-2007

Modified by 2whlmayhem at 7:42 PM 5-9-2007


Modified by 2whlmayhem at 8:18 AM 5-21-2007

[the4ork]

WTB some cleaned up toyota blacktop throttle bodies

[Mr. Nobody]

I sold my rabbit so I no longer need this stuff.

Setup comes with...

2x Weber 45 DCOE Carbs. Practically new.
1x Pierce manifold for VW 16v motors.
4x Velocity stacks.
4x Manifold to cylinder head vibration gaskets.

For extra you can get a 16v head refurbed 30k ago with no cams.

Also have the black powdercoated valve cover for the right price.

Start at $1000 for the carb setup. $1500 for everything.

More pics available upon request.

[16vscooter]

FS: gsxr 750 throttles JUST the throttles nothing else. $75.

[g60manny]

Quote, originally posted by MkIIRoc »

SOLD Modified by MkIIRoc at 12:25 PM 3-13-2007

Finish look

[scirocco77]

WTB: single weber w/ manifold and linkage for counter flow race motor. motor is a 12:1 2.0 9a with 1.8 solid head. got anything?

[Kanoa9321]

NO longer running a 16v so I dont need this.

The carbs only have about 1500 miles on them.

$1200

What you get:
- 2 Weber DCOE 45's (with 38mm Venturi)
- Intake Manifold
- Linkage Setup(pedal feels as good as a stock car)
- Custom Fiberglass Airbox

Carbs have 38mm Venturi instead of the stoclk 36mm which are too small for a 16v. The carbs are mounted on the manifold and the bolts have been safety wired, so they cant vibrtate loose.

Intake Manifold

- is imported and much better than any you can find locally such as the Pierce. I had originally bougt a Pierce and then had a lengthy conversation with the owner about how crappy it was and he got so pissed off and gave me a full refund.

- has also been tapped for the booster and has been ported and polished inside to remove the casting marks and then also gasket matched on both ends.

Vibration Mounts

- Also included are vibration mounts which are also much better than the plastic ones found locally.

Airbox

- The airbox is a custom made fiberglass box that allows air to enter directly through the grill and into the carbs, and has a rubber section to allow the engine and carbs to move independent of the airbox.

Linkage

- I have a custom linkage setup that feels just as good as a stock pedal and the throttle won't stick as it has an additional return spring.

I will get additional pictures of the setup not on the car.

[oldschoolwatercooled]

These are mikunis with about an 1 11/16" bore. They are individual, not paired like the ones on gxrs. There is about 5mm difference between the overall spacing of these and a 16V head flange! There is enough overlap on the sync tabs and screws that the brackets could be slightly slotted and spaced to match a 16V with no problem! They have injectors[idk what # etc], and a fuel rail. $275 shipped anywhere in the USA.

[2whlmayhem]

Quote, originally posted by 2whlmayhem »

For Sale : matching set of WEBER 45DCOE carburators. These originally came off a Porsche, then were used on my boys ol skool built volvo. They have been sitting for a little so could use a good cleaning. One carb is missing the inspection cover for the accelerator pump(easy to get). All moving parts move freely with no binding or play. Comes with air filter bases and extra chokes and jets. Paypal or local pickup only. New Port Richey, FL 34652. Chris 727-729-0777 $300 shipped http://img337.imageshack.us/img337/7587/003by9.jpg http://img408.imageshack.us/img408/7812/004oo6.jpg http://img410.imageshack.us/img410/4903/005zh1.jpg http://img408.imageshack.us/img408/4190/006vx1.jpg http://img441.imageshack.us/img441/6751/007nc8.jpg http://img82.imageshack.us/img82/6112/008bd1.jpg Modified by 2whlmayhem at 3:05 PM 4-29-2007 Modified by 2whlmayhem at 7:42 PM 5-9-2007

still for sale

[Speed Racer.]

CBR600 ITBs- $100

[Ted Brogan]

FS: 034efi IIc ecu with wiring harness and MSD coils. Currently setup for a vr6 but can easily be changed to suit whatever you need it for $1300 shipped or trade for complete VR6 swap or turbo parts (No Junk Please)

[chrislane31]

SOLD

GSXR 1000 ITB's with fuel rail, injectors and lots more.

Best offer

Modified by chrislane31 at 2:12 PM 7-12-2007

[kenny_blankenship]

back up for sale

46mm haybusa throttle bodies, already made to fit a 16v

I am looking for 250 shipped, but I am also open for trades.


Modified by kenny_blankenship at 2:57 AM 6-16-2007

[Squadra Corse .:HF]

I have a set of BMW K1200S throttle bodies off of a Formula BMW race car. I will have pics and bore specs up ASAP. I'll entertain all reasonable offers.

[joezeeuw]

SOLD


Modified by joezeeuw at 7:55 AM 8-3-2008

[Audi4u]

http://cgi.ebay.com/Electromot...wItem

[L33t A2]

FS: Passat 16v Throttle Body with TPS for Standalone

http://cgi.ebay.com/ebaymotors...46280

Buy it now set at $100, starting bid $20