For Sale- Wanted To Buy Thread

[BROsiah]

f.s genuine Italian dellorto drla jets with "inc" logo



i here is a list of what i have that i do not need . i bought these and never used any except for the 132 mains for about 10mins. i am running DRLAs on a watercooled rabbit so when i bought these i went off the recommendation of aircooled guys,turns out they were WAY off so i have all these i dont need . if you buy a size i would like to sell all four of each size not just one

12$ per 4 ...just a fyi these retail for 7 each so 12 for four is a awesome deal

idles:
50, 52 (4each)

mains
110,112,113,115,117,119,,121,123,125,,128,130,132 (4 each)

[Krazy Straw]

I have a few new lc1s I can let go of..

got any spare lc1 controllers? mine **** but the sensor is still good

[rocklizzard91]

got any spare lc1 controllers? mine **** but the sensor is still good

i have one with a db gauge, controller and a bad sensor. ill let it go real cheap
PM me an offer and its yours

[rcortez13]

SOLD
Brand new never used!
$10 Shipped (US)

[rcortez13]

SOLD
Passat 16v throttle body with TPS. TPS checked good with .1 to 2.9 ohms.
$40 Shipped (US)

[ncbrock]

weber jet kits, 0 pump bleeds, extra insanely large pump jets (.90 or something like that), 55 f8 idles, extra weber banjo fittings and misc parts, injector plugs. pm me for prices

By ncbrock at 2012-07-04

still got everything here

[Stussy NJ]

300 + shipping with harness came out of a running 16v text 609-784-9669 for pics

bought this off Zoolander on here but decided im going with Vems instead.

[ecksjay]

I sold my carb setups, but still have a new Rowland xflow manifold.

Sells for $295 at Extrudabody, or you can wait 7 weeks for one to clear customs from South Africa...or buy mine for $140 shipped.

[rysskii3]

I sold my carb setups, but still have a new Rowland xflow manifold.

Sells for $295 at Extrudabody, or you can wait 7 weeks for one to clear customs from South Africa...or buy mine for $140 shipped.

Post pics

[rysskii3]

installed but never used:

Ttt

[djidizz]

i have a weber intake manifold for 8v for dual weber dcoe40/45 in very great shape.!

i prefer trade for a 16v manifold intake for dual weber.

[seerpink]

SOLD
Passat 16v throttle body with TPS. TPS checked good with .1 to 2.9 ohms.
$40 Shipped (US)

Thanks - Fast and Packaged with care

[Stussy NJ]

ms2 is sold

[mauzer76]

Pair of Mikuni PHH44's for sale for parts only. Bodies have cracks, and one has a broken mounting ear. Components (jets, floats, caps, etc...) are in good condition. $100+ shipping for both. PM for pics.

[mk2gtig60]

Weber 40s dcoe with a custom aluminun 16v intake..

Person I bought these from said they had been rebuilt. I never got the chance to use them.


$500 picked up.. I payed more than that but I'm in a bind and need money..

[oldschool eighty8]

Gonzo

[rysskii3]

Just throwing this up. If they don't sell before I get another block and trans I'll be keeping it.

FS
R1 carbs with 160, 180 and currently in 190 jets
Custom made velocity stacks they cleared the hood of a mk1
Aluminum 16v intake. You'll be getting some rubber 1 3/4 couplers and clamps. The ones pictures were too big.
Ms1 v3 set up to control the coil, also has launch control. I have a harness made for a 16v I'll
Include.
Summit racing fpr and a mr gasket low pressure fuel pump.

Price is 750 for everything. I will not split it up.

I will get more pictures

Dibs on intake mani

[canadian_rabbit_16v]

pretty sure said will not split up!!!

[oldschool eighty8]

Dibs on intake mani

I prefer to sell it all together at this point. If that changes I'll let you know.

[rysskii3]

I prefer to sell it all together at this point. If that changes I'll let you know.

OK

[Rallyfreak202]

BUY THESE FOR YOUR PROJECT! CHEAP!

25

[rysskii3]

installed but never used:

[ncbrock]

pretty sure said will not split up!!!

Some people cant read

[BKFM72]

Wtb ecm. # 021 906 258 ba

[RalleyRabbit]

F.S. Gsxr 1100 unmodified ITBS. $150 message for pics and details.

[djidizz]

i have a weber intake manifold for 8v for dual weber dcoe40/45 in very great shape.!

i prefer trade for a 16v manifold intake for dual weber.

SOLD! thanks vwvortex.!

[djidizz]

i want to buy a weber intake manifold for 16v. it's the only parts that i need to make the conversion CIS to twin weber 45dcoe.!

thank

[ZWaters10]

I still need one! Cash in hand!

[oldschool eighty8]

Sold

[prom king]

WTB Weber 45 Jets

150 Mains x4
180-200 Airs x4 each
F955 Idles x4

Let me know what you have, thanks

[rysskii3]

installed but never used:


also, i have main jets for R1 carbs: 160x4, 165x4, 170x4, 175x4, 180x4, 185x4. all are new except the 185 which were installed and taken due to not being large enough for my application.

[Stussy NJ]

bought this off a guy on here believe his name was rabbit farmer. He ran this setup on a 1.8t in a mk2 comes with ecu with full harness. Also believe it to be built by Paul K.

250+ shipping lets move this!

[D-Gti vr6]

Here is what I have:

16v 2.0l complete longblock with carbs set up. size 40 with a saab distributor and tranny.
ready to be swap to a Mki.

email me at davds1182@yahoo.com for any questions. or call me or text 949 6783571

Price $2000obo what you see is what you get.

[SUSPENDED]

$1200 obo

sk dcoe 40mm sidedrafts used, rebuilt
long manifold (Rolands?) new, port matched
electromotive hpv-1 used
b.b. distro block off plate new
balance with 60-2 ring installed used
filters k&n used
abf coolant bit new
gaskets and other bits new

no: throttle linkage, ignition wires, horns

[diddle.]

I have a pair of webers and a manifold, plus a broken vac advance distributor. Building a different motor for the car now. I have a built 2.1l 16v I would like to sell also.

http://www.ebay.com/itm/VW-16v-Dual-...7c6ebe&vxp=mtr