For Sale- Wanted To Buy Thread

[hantonyc]

found what i needed, thanks

[hantonyc]

saab dizzy(rebuilt) + new cap and rotor
msd blaster 2 high vibration coil
spark plug wires
icm

looking to get 140$ shipped. by PM please.

[prom king]

Wanted a weber carb manifold, I need another for another project,

[hantonyc]

feeler , my whole engine setup

1.8 16v head decked 0.020"
arp headstud
supertech valve spring
supertech valves nitride coated
TT 276 cams
lightweight lifters
ported and polished

huco fuel pump ( suction type , low pressure need of FPR )
manifold
deluxe linkage
dcoe 45G ( 4 progression holes )
2 sets of trumpet ( stock never used ) and full radius trumpet
**** load of jets and spare fuel filters
msd blaster coil
saab dizzy ( new cap and rotor )
black wrinkle powder coated valve cover

100% bolt-on setup , can also sell engine bloc part ( forged rods, ARP everywhere, diesel alt setup, new starter new clutch etc etc ) , only if i sell the top end !

price , if like 2500$ neg shipped for all that ! worth almost 4g , everything have been bought NEW and have 6000km , can separate head from weber setup !

pic :

[klcorrado05]

I have a set of 40mm mikuni carbs in really nice shape. $100.00 plus shipping


I also have an aluminum flange for an aba with runners already fit and cut. Needs to be welded together. I'll throw this in for an extra $50.00
Kip 678-449-5400

[oldschool eighty8]

Have a ms1 v3 ecu set up for direct coil control, going a different direction and won't be using this. $250 +shipping. Price is firm.

[rcortez13]

I was running this setup with MS1 fuel only. I've upgrade to fuel & spark now. Can work with MS or carbs. The wires are ran for a 16v. I have 2 knock boxes, 2 icm's, knock sensor and harness. This can also be used on an 8v with some lengthening of wires for the distributor.

SOLD
$80 Shipped (US)

[crazy16v]

http://forums.vwvortex.com/showthrea...feeler-16v-itb

[fredybender]

WTB megasquirt or other standalone to drive waste spark coils (4) and external trigger on my carbed 16v, pm please !

PM'd (Megajolt lite JR) with everything needed

[microdub98]

(2) Dellorto DHLA 40 motorsport(not emission) carbs w/ 5 emulsion holes & a FRESH REBUILD
(1) Rowland manifold for 2.0L ABA head
(1) *NEW* PMO FPR
(1) *NEW* Sytec "dual carb" linkage kit
(1) Early vac advance dizzy w/ TT adapter & *NEW* NGK "blue" wires


$800 cash takes it all. Located in Central Pa

Don't get on here much so email at duttry98@gmail.com or text 7one7-9six8-1seven4nine

Thanks, Jeremy

[so.cal.sparky]

Innotvate mtx-l (http://www.innovatemotorsports.com/products/MTXL.php ) only 6 months old i only drive about 15 miles a day
was controlling my Cis-e with this wide-band

150.00 plus shipping

[rysskii3]

installed but never used:


also, i have main jets for R1 carbs: 160x4, 165x4, 170x4, 175x4, 180x4, 185x4. all are new except the 185 which were installed and taken due to not being large enough for my application.

[oldschool eighty8]

Ms1 v3 ecu set up for direct coil control, going a different direction so this is up for grabs
250+ shipping

[vdubman2.0t]

Ms1 v3.0 using hall. Setup for gm iat as well. Going different setup. Looking for 250$ has ecu and harness. Pm for any interest

[crazy16v]

All gone

[OGVW]

SOLD

[ZWaters10]

Im a turbo guy at heart, and dont need this stuff. Probably spent over 2K on all of this, but some of you can agree, there's no rehab for boost addicts! Have all receipts and documentation. Car got built all last year, drove it probably 20 miles, weather turned ****ty, and has been garaged ever since.

1.8L Hydro head (Built by JP precision in Freedom, PA)
Rebuilt Dellorto DHLA 40 carbs (30mm venturis,135 main jets,57 idle jets,180 air correctors,7772.11 emulsion tubes,38 pump jets,185 idle air bleed jets)
Autotech 270 camshaft
Supertech dish faced valves with 7mm stems (STD size)
Supertech HD springs
Techtonics Tuning Titanium Seats and retainers
Techtonics Tuning intake and exhaust seals
Techtonics Tuning silicon bronze guides
Techtonics Tuning triple groove keepers
Head was decked .01 mm
Mild Port and polish
New Misab gaskets
New air horns

For 75 extra bucks I can include a Pacesetter header.

$ 1200 Picked up
$ 1300 Shipped

Firm on price, thanks for looking

[oldschool eighty8]

Have a ms1 v3 ecu set up for direct coil control, going a different direction and won't be using this. $250 +shipping. Price is firm.

Still up for sale!

[B4S]

Some stuff I dug up today:

8v POINTS distributor, in IMMACULATE shape. For those out there interested in running a bit more old-school with their carbs. $50





MSD 8920 tach adapter. No idea how I ended up with this, $20



Malpassi bypass FPR (boost referenced too). Came stock on Maserati Bi-turbos. Great for running carbs with an EFI fuel pump. $40

[oldschool eighty8]

Time to let go of this stuff, I'm moving on to a new project

2000 R1 carbs in great shape with new pilot jets and 190 mains
3in velocity stacks
Race craft aluminum 16v itb manifold that I had modified to line up with the carbs includes couplers and clamps
Carter 4070 electric pump
Summit racing fpr ( the gauge stopped working but the pressure reg is functional

I also still have the megasquirt ecu listed above. I will let all of this stuff go for $650
The race craft mani alone was $300

Will send pictures to who ever is interested
Thanks

[8716v]

Ihave a16v setup for sale on eBay. Item number 281036818250 . Setup for direct coil. Has wire harness and fuel rail included

[vw_87]

Hi,

Want to buy a megasquirt 1 set up for an 8v 1.8. let me know if you have something, thanks

[PBWB]

SOLD (finally)

[vw_87]

Looking for a LC-1 innovate controller - with or without gauge, thanks

[hantonyc]

saab dizzy(rebuilt) + new cap and rotor
msd blaster 2 high vibration coil
spark plug wires
icm

looking to get 140$ shipped. by PM please.

still for sale

[16ValveInside]

WTB - Looking for a good used complete, 16V Passst throttle body w/TPS in working order, for my 16V megasquirt project

[rysskii3]

installed but never used:


also, i have main jets for R1 carbs: 160x4, 165x4, 170x4, 175x4, 180x4, 185x4. all are new except the 185 which were installed and taken due to not being large enough for my application.

[respect_my_fast]

looking for a downdraft kit for my jh/aba swap.

[Erthan]

WTB:

Yamaha R1 carb setup for 1.8 16v.

I'll take any parts you have really. Especially looking for manifolds or flanges.

I will also trade CIS-E parts if you're interested.

[rysskii3]

WTB:

Yamaha R1 carb setup for 1.8 16v.

I'll take any parts you have really. Especially looking for manifolds or flanges.

I will also trade CIS-E parts if you're interested.

Check out the 2nd lost above yours, I have jets and rpm module MSD 8910

[microdub98]

(2) Dellorto DHLA 40 motorsport(not emission) carbs w/ 5 emulsion holes & a FRESH REBUILD
(1) Rowland manifold for 2.0L ABA head
(1) *NEW* PMO FPR
(1) *NEW* Sytec "dual carb" linkage kit
(1) Early vac advance dizzy w/ TT adapter & *NEW* NGK "blue" wires


$800 cash takes it all. Located in Central Pa

Don't get on here much so email at duttry98@gmail.com or text 7one7-9six8-1seven4nine

Thanks, Jeremy

Still here, someone make me a reasonable cash offer

[R3DZ3RONIN3]

2 45 DCOE CARBS
Bought from Weber
Ran for 1K miles
went w/40's
$500 OBO
Located in Kentucky

[MKIGTITDI]

I have an R1 carb set up complete with a spare set of r1 carbs for parts and carter fuel pump, manifold adapter, and fuel pressure regulator. Ill let everything go for $250.


In this you can see I had to cut a hole in my hood to clear the carbs.

[hantonyc]

saab dizzy(rebuilt) + new cap and rotor - sold
msd blaster 2 high vibration coil - sold



new 034 motorsport external trigger kit for 16v : 180$ shipped

new MS built by need_a_vr6 setup for waske spark coils ( 2lt coils ) and an external trigger wheel , paid over 500 : 300$ shipped i wont need it.


NEGO !

[rysskii3]

installed but never used:


also, i have main jets for R1 carbs: 160x4, 165x4, 170x4, 175x4, 180x4, 185x4. all are new except the 185 which were installed and taken due to not being large enough for my application.