For Sale- Wanted To Buy Thread

[killergolf]

40-45 schrick carb intake mani. I have had webers and dellortos on this manifold, 40's and 45's, the thing is ported super far. You can see in the pics, the dude who did it went too far and got into the bolt chambers, but I had no leak problems the entire time i had the manifold on..I just used some sealant on the heads of the bolts, worked just fine. Anyway, I'll let the pics do the talking.

$100

Carter 4070 fuel pump for sale as well... the thing works great, never had any drops in pressure. comes with all the accessories in the pics.

$40

[super 74]

SDS A/F meter. Hooked up just to tune. Maybe 200 miles of use.

$40 SHIPPED.

[the brit]

Igntion wiring harness for 16v - sold
Early rabbit ignition harness complet with matching ignition module, will hook right up to a SAAB dizzy on a 16v head.

Modified by the brit at 8:33 PM 6-21-2007

[Jetta2dr]

http://www.rallyanarchy.com/phorum/read.php?7,7053

Quote, originally posted by John Vanlandingham »

So somebody sends me the alleged Cossie YBB Normal aspirated intake manifold. But it doesn't fit too good on the YBs head. So after hours of sleuthin and searchin I find it looks like a VW 16v head bolt pattern. Today I confirmed it. So For Sale! $1,000,000 or near offer. In Seattle, 206 431 9696 or via following da link in da siggie. John Vanlandingham Sleezattle, WA, USA Vive le Prole-le-ralliat http://www.jvab.f4.ca

[kleingti]

I have 2 brand new 40 dells.with new manifold and special water outlet has k&n filters,all gaskets and such for install. 750. If interested, kleingti@hotmail.com

[MorpheusMac]

I'd love to snag a set of 16V throttles....50mm range?


Modified by MorpheusMac at 7:55 AM 6-28-2007

[2whlmayhem]

SOLD

Quote, originally posted by 2whlmayhem »

For Sale : matching set of WEBER 45DCOE carburators. These originally came off a Porsche, then were used on my boys ol skool built volvo. They have been sitting for a little so could use a good cleaning. One carb is missing the inspection cover for the accelerator pump(easy to get). All moving parts move freely with no binding or play. Comes with air filter bases and extra chokes and jets. Paypal or local pickup only. New Port Richey, FL 34652. Chris 727-729-0777 $275 shipped http://img337.imageshack.us/img337/7587/003by9.jpg http://img408.imageshack.us/img408/7812/004oo6.jpg http://img410.imageshack.us/img410/4903/005zh1.jpg http://img408.imageshack.us/img408/4190/006vx1.jpg http://img441.imageshack.us/img441/6751/007nc8.jpg http://img82.imageshack.us/img82/6112/008bd1.jpg Modified by 2whlmayhem at 3:05 PM 4-29-2007 Modified by 2whlmayhem at 7:42 PM 5-9-2007 Modified by 2whlmayhem at 8:18 AM 5-21-2007

SOLD

[mack73]

SOLD


Modified by mack73 at 11:33 AM 7-2-2007

[Fast929]

Deleted.


Modified by Fast929 at 5:20 AM 6-28-2007

[16vscooter]

sold


Modified by 16vscooter at 7:14 PM 7-18-2007

[MkIIRoc]

sent IM, very interested

[Scirocko]

WTB 16v ITB setup for my scirocco, the more complete the better.

Contact at jcastoro@gmail.com

[OnTheRunDCI]

Here's what I know right now. This is my gargae mates setup.

Megasquirt spark prewired for a 16V (was on an NA 16v less than 500mi)
1.8T injectors
Bahn Brenner fuel rail
Ishra (sp) Johnson crank scraper
Scirocco upper manifold
2 throttle bodies (1 with TPS)
Phenolc spacer

Waiting for more info but it's everything you need to do megasquirt on a 16v

Asking $1000 for everythng

[billyVR6]

I would be interested in these....

Quote, originally posted by OnTheRunDCI »

Ishra (sp) Johnson crank scraper Phenolc spacer

Those are not needed to run MSquirt, Carbs, ITB's, etc., etc.
So maybe he'll part with them. Thanks.

[OnTheRunDCI]

I'll ask Billy.

P.S. I miss your ramp.

[billyVR6]

Thanks, see what he says, I had a hook up on a IJ scraper but the deal fell through, don't know waht happened. If the spacer is a good one, not a NewSouth powergasket, I'll be interested in that as well.

I hear you on the ramp, the last one that I built (the smaller 8' one) was where it's at. Someone gave me pictures a little while ago, doing stuff that I didn't even remember I doing. That ramp helped season transition skills for many of our local "claim to fame" skaters these days for sure.

We can talk good ol' days next time I see you out and about.

[MkIIRoc]

Just bought the above manifold, so I'm getting rid of mine.

Fits up to 45mm weber, dellorto, solex, or mikuni carbs. I port matched it to a eurospec head. It's also drilled and tapped for direct port nitrous, with threaded plugs. It has a brake booster port as well, and it has a threaded plug in it. I stripped most of the paint off of it, but there's nothing wrong with it.

I also clearanced it to use with big port race headers.

$75 shipped. I have some new mounting gaskets you can have as well.

[D-Gti vr6]

this a badass set is a 32/36 webber carb witha custom air fileter i looks like a 8v nd it sounds like a 8v it has work great but i need to repleace the heads and i got a g60 setup for my car know.

IM for questions

Price$450 obo

Comes w/ c
carb 32/36 webber,
2 air filter
,fuel pump,
fuel lines,
fuel filter,
trodle cable,
Wires for the distributor
g60 valve cover

[g60manny]

for sale its a bre ported i will take pix of the inside later let me know $75ship

Modified by g60manny at 2:49 AM 7-30-2007


Modified by g60manny at 2:50 AM 7-30-2007

[Breadfan5968]

WTB: Full ITB setup.

Just looking for everything I need to go ITB on a 1.8 16v.
I'll have the money within a month, and the car will be here by the end of September, so I have time to look for a nice and good setup.
No rush.

Prefered PNW seller, or willing to ship.


Modified by Breadfan5968 at 9:31 AM 7-19-2007

[Auto Pilot]

I have a set of wires that I do not need. Was going to use for a coilpack conversion on my MS setup. Well, these will not be use so looking for someone to pick them up for their project.

they are not used, still need to trim to length and finish the ends. They include two different kinds of ends depending on your application.

They say "Megafire 250 8.5mm High Performance" along the length of wire. The shortest wire is approximately 31" from end to end.

I am looking to get $40 shipped in the US.

[MkIIRoc]

Modified by MkIIRoc at 8:30 AM 9-5-2007

[Mike Ngo]

I bought these from a gentleman from Germany. They are all synchronized and jetted for a 16v 2.0 motor

comes with
2 manifods
2 carbs
manifold gasket
throttle cable
Carter fuel pump

Paypal accepted.
$850 shipped

[gogogadget]

are all 8v carb setups towards the rear of the car?

[autotragik b3attlewagen]

Quote, originally posted by gogogadget »

are all 8v carb setups towards the rear of the car?

except for Crossflow motors, yes. Thats where the Intake mani bolts

[autotragik b3attlewagen]

FS: Twin Mukuni 40mm Carbs. w/ a manifold that bolts right to a 8v counterflow motor.

Bought them about 6 months ago with the intent of putting them on my 1.7 Liter Rabbit motor, but I am selling the car, so carbs must go too.

Would like to get $400 shipped They were rebuilt by the previous owner.

Pics in a sec, when I can get them hosted...

Modified by kjverock at 5:54 PM 8-1-2007


Modified by kjverock at 5:57 PM 8-1-2007

[savetherock]

SOLD


Modified by savetherock at 10:52 PM 10-30-2007

[Kanoa9321]

FS: 16v Carb Setup

http://forums.vwvortex.com/zerothread?id=3228397

[MkIIRoc]

FS-

4x 32mm chokes for DHLA 40 Dellorto's
$40 shipped
I made about 140 horsepower out of a 2.0 liter with these. They are NOT too small for a 2.0, as some will say. On a stock 8v, they provide a great torque curve, with power tapering off just under 6000 rpm.

Jets Jets and more Jets!
These are $2.50 each shipped, minimum order of 4. 95% are new, the used ones were used for 1 run only to dial the car in. Cheaper than ebay, and get them faster since they're stateside!

Mains-
4x 170
4x 160
4x 142

Idles-
4x 60
4x 65
4x 57

Air's-
4x 210
4x 165

If you want them all, I'll cut you a deal, just IM me.



Modified by MkIIRoc at 6:04 PM 8-7-2007

[914 16V]

Are your Dellorto 40's still available? Please let me know. Thanks
-Chris

[westonie]

WTB: pierce or twm short 16v dcoe manifold. I just called pierce and the salesman quoted me $400! Willing to pay 300 for one in good shape...

[914 16V]

Are your Dellorto 40's still available? Please let me know. Thanks
-Chris

[Mstadt]

Quote, originally posted by westonie »

WTB: pierce or twm short 16v dcoe manifold. I just called pierce and the salesman quoted me $400! Willing to pay 300 for one in good shape...

Really? They told me 275+ shipping ... how big are you running?

[Shurls]

looking for a Weber/Dellorto DCOE flange style Manifold for a AWP 20V head.

[Diggatron]

New Megasquirt v2.2 modded for spark with Relay board and relay cable. Has been stim'd, and is ready to ship out immediately. I am looking to have $400 shipped.... I.M. me for further details and arrangements. Buy today, have it in your hands QUICK!