Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 2 of 11 FirstFirst 123456 ... LastLast
    Results 26 to 50 of 267

    Thread: BFI HD MK3 and Rado VR6 Motor Mounts

    1. 01-02-2007 12:03 PM #26
      how much is for front engine mount and trans mount for gti vr6?

    2. 01-02-2007 12:06 PM #27
      Prices are in the first post, and on the website

    3. 01-12-2007 10:26 AM #28
      Ok I finally got to drive mine (Mk2-Vr6) with full stage1 set (including tranny) It feels amazing! and I have to say Vibration is minimal.

    4. Member dossantos25's Avatar
      Join Date
      Mar 17th, 2005
      Location
      Toronto
      Posts
      8,810
      Vehicles
      05 GLI, 09 CBR600RR
      01-13-2007 06:59 PM #29
      Quote, originally posted by BiSiE »
      vibration?

      ive been in WannabeVWguys car and its not that bad, i just installed the comeplete Delrin kit as well and i just had the car idling and revving while sitting and although there is slight vibration, the engine doesnt move PERIOD ... these are VWs not high end luxury cars so i dont mind a bit of vibrations, but its hardly enough to ripple liquid in a cup in your cupholder.

    5. 01-15-2007 11:01 AM #30
      IM Sent for Trans Mount Stage2

    6. Banned
      Join Date
      Dec 26th, 2005
      Posts
      4,426
      01-19-2007 01:12 PM #31
      Can anyone confirm or deny that the st1 or st2's will raise the height of the motor up slightly, and give more ground clearance ?

    7. 01-19-2007 02:14 PM #32
      If your stock mounts are old and have collapsed with new mounts, ours or others, the motor will sit higher than it did but the same as it would with new OEM mounts

    8. Junior Member vee arr six's Avatar
      Join Date
      Nov 29th, 2004
      Location
      FLA
      Posts
      65
      Vehicles
      MK6 GTI
      01-20-2007 05:24 PM #33
      I have stage 1's all the way around including the tranny mount. I would recomend replacing all the mounts at once because the stage 1's were too much for the 'heavy duty' rado mount causing it pop. Also, after the mounts were installed i noticed my motor sitting slightly higher than before, it actually would hit the underside of my hood when i would start to slam gears causing it to dent. After i installed the stage 1 tranny mount about 3 weeks ago i noticed that my tranny sounded like it was whinning, but apparently thats normal if you put a solid tranny mount on a VR. I love the way my VR drives now, it feels very solid, and as my friends say 'feels like a go-cart' cause of the mild vibration.
      Old: MKIII GTI VR6, MK5 GTI FSI
      New:MK6 GTI TSI

    9. Member Tire_Marx's Avatar
      Join Date
      Mar 3rd, 2004
      Location
      Winnipeg, MB
      Posts
      2,765
      01-20-2007 09:39 PM #34
      so a few nights ago, the girl said "i like the vibrations!"

      thats in a stage one. and yes, it was vibrating pretty good. but then again, it was almost -40
      2002 Lexus IS300 - Trac off is just Japanese for sideways on

    10. 01-21-2007 06:46 PM #35
      How do the stage 1 vibrate compared the the vf mounts?
      I am currently on the turn2 front mount which needs to make way for a complete set.
      The only problem I can see now is that you don't ship outside NA. Any chances for this to change anytime soon?

    11. 01-23-2007 12:35 AM #36
      Quote, originally posted by vee arr six »
      I have stage 1's all the way around including the tranny mount. I would recomend replacing all the mounts at once because the stage 1's were too much for the 'heavy duty' rado mount causing it pop. Also, after the mounts were installed i noticed my motor sitting slightly higher than before, it actually would hit the underside of my hood when i would start to slam gears causing it to dent. After i installed the stage 1 tranny mount about 3 weeks ago i noticed that my tranny sounded like it was whinning, but apparently thats normal if you put a solid tranny mount on a VR. I love the way my VR drives now, it feels very solid, and as my friends say 'feels like a go-cart' cause of the mild vibration.

      x2
      just drove mine for like 4 hours. (stage1 all around+tranny) feels awesome. not too much vibration, theres a verycool hard engagement of the starter, i can feel it with my with my butt. nice quick response and gear banging gives me whilash.

    12. 01-23-2007 12:32 PM #37
      Does anyone have a clear answer on how the stage 1 vibrates compared to the vf mounts?

    13. 01-24-2007 02:59 PM #38
      VF's are a complete redesign and replacement mount, our are inserts designed to work in the same manner as the stock mounts and using the same brackets.
      As far as firmness our Stage.5 & 1 are softer than the VF. Our Stage 2 is harder


      Modified by black forest ind at 3:36 PM 2-24-2009

    14. 01-24-2007 06:55 PM #39
      I DON'T KNOW BUT THOSE MOUNTS LOOK PRETTY GYPSIE

    15. Member Tire_Marx's Avatar
      Join Date
      Mar 3rd, 2004
      Location
      Winnipeg, MB
      Posts
      2,765
      01-24-2007 09:08 PM #40
      Quote, originally posted by rolls98whitevr »
      I DON'T KNOW BUT THOSE MOUNTS LOOK PRETTY GYPSIE

      I DONT KNOW BUT MY CAPS LOCK WORKS. also, these mount are fantastic, especially for the price
      2002 Lexus IS300 - Trac off is just Japanese for sideways on

    16. 01-25-2007 09:30 AM #41
      Quote, originally posted by Tire_Marx »
      I DONT KNOW BUT MY CAPS LOCK WORKS. also, these mount are fantastic, especially for the price

      HA!
      Roller's probably drunk and couldn't find the caps lock...

    17. Member dossantos25's Avatar
      Join Date
      Mar 17th, 2005
      Location
      Toronto
      Posts
      8,810
      Vehicles
      05 GLI, 09 CBR600RR
      01-25-2007 06:21 PM #42
      just installed stage 2, well just droe it for the first time, yes vibration, the front windows are rattling a bit but its a 16 year old car so its expected.... started loosing traction in 2nd and shifting seems alot firmer. great product!

    18. 01-27-2007 06:29 PM #43
      Any idea on time scale when they r gonna be on sale here in the UK?

    19. 01-28-2007 03:31 PM #44
      Working on it

    20. 02-07-2007 05:22 PM #45
      Uk?????

    21. 02-08-2007 10:06 AM #46
      Justmatz in the UK will be carrying these mounts very soon. Contact them with your interests. http://www.justmatz.co,uk [IMG]http://**********************/smile/emthup.gif[/IMG]

    22. Member vwisthebest's Avatar
      Join Date
      Sep 17th, 2003
      Location
      Austin, TX
      Posts
      1,664
      Vehicles
      Too Many VWs
      02-08-2007 07:48 PM #47
      Are you guys having a sale on the Stage 2 Tranny mounts?
      -Zach
      Mk1 Rabbit Diesel : Corrado VR6 : Mk3 Golf ABA : Mk5 GTI 2.0T
      European Auto Gruppe - Texas-based Euro club 11 years strong

    23. 02-09-2007 10:15 AM #48
      Nor currently no...

    24. Member vwisthebest's Avatar
      Join Date
      Sep 17th, 2003
      Location
      Austin, TX
      Posts
      1,664
      Vehicles
      Too Many VWs
      02-14-2007 12:49 PM #49
      Quote, originally posted by black forest ind »
      Nor currently no...
      Do u currently have any in stock? When I ordered my Stage2 Complete Kitseveral months back u guys were out of the Poly tranny mounts.
      You didn't post a price for just the Stage2 tranny.
      -Zach
      Mk1 Rabbit Diesel : Corrado VR6 : Mk3 Golf ABA : Mk5 GTI 2.0T
      European Auto Gruppe - Texas-based Euro club 11 years strong

    25. 02-14-2007 12:52 PM #50
      Yes all mounts are in stock, and all prices can be found on the website

    Page 2 of 11 FirstFirst 123456 ... LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •