Had the front clip repainted...WoOt!Got my NewSouth oil pressure and temperature gauges in and working correctly. Turns out the temp gauge had a bad sender.
#281
4 wheel alignment
#282
Had the front clip repainted...WoOt!Got my NewSouth oil pressure and temperature gauges in and working correctly. Turns out the temp gauge had a bad sender.
Arguing over the internet is like being the smartest kid with Down's Syndrome...I think my case is full blown.
#283
Quote, originally posted by halfbreeded »
![]()
![]()
YES!!!!
![]()
![]()
I went to the AWE booth dropped the car off for 20 mins and came back it was done! I got the GIAC 93!! The ride home was a blast!
sounds familiar..haha
#285
everytime i do something new to my car i forget about this thread...but not this time![]()
Blacked out my B-pillars with vinyl.
It was a pain in the ass to lay it down with out bubbles...i thought doing my own tint was a pain in the ass...
but im happy with the result![]()
(CELL PHONE PICS)![]()
@jakevr6
#286
Quote, originally posted by DBR007 » the partying is getting weaker
with the increased pig presence.that's cuz you didn't stay with us
my baby is getting a bath today, and the interior detailed, as i left my windows down and sunroof open the other night, and it had rained early in the a.m.
#288
Installed Hawk Ceramics in the front, Haldex Change, and ECS Spacers in the back. Oh, and I also cleaned the wheels while off, front and back. That sure does make a huge difference!BTW, those brake bolts on the back of the caliper are FTL. I don't have an impact setup, so breaking those bolts by hand was the suck.
Gabriel
#289
put my brand new black 17.5mm ecs spacers on that i got in the mail today.looking goooood
#290
I finally installed my Cupra Lip on Sunday 7/27/08Now waiting for Lug bolts from ECS to install my 17mm spacer
It's an addiction
![]()
Laz
Many people enjoy eating apples and oranges, but in the end they are still… just apples and oranges. The R32 is passion fruit.. Live Long and Prosper.
#291
20mm and 5mm spacers and 2 new michelin pilot sports
#292
i ordered ecs adjustable control arms, ecs 15mm spacers, and conical 14x1.5x43mm bolts![]()
R thirty poo
#294
seems like ecs does really well as most of these posts are about spacers and bolts from them.
#295
Quote, originally posted by vdub_luve » seems like ecs does really well as most of these posts are about spacers and bolts from them. Lol yah they do really well.. IF they could keep things in stock!! Like 15mm spaces with bolts! I need these!!
as for what I did to the R was put my R logo center caps in and clay bar the whole car!
![]()
Porsche Cayenne, Porsche Cayman S, VW MK4 R32
#296
bath today... never knew how easy it is to wash RS as compared to my past 3 black cars....![]()
Matthew - RS mk4 .:R32
NorCal.:R32.......
Service/Install needs in Nor-Cal - HOUSE of DUBS 408.227.3827 ask for Bob
#298
I bought it a track wheel/tire setup.
.:Rick
Redundant Redundancy, R32 Parts, BMW 135i 4Sale
ÜroTuning - Performance & OEM European Parts Store
ÜroClassifieds - Parts and Auto Classifieds for all European Makes and Models!
#299
I installed these ...![]()
#300
evoms intake![]()
#301
got a pioneer avic z3 installed - its working really nice as of now with my 2 10 inch jl w3's, jl amp 500w and capacitor.
#302
My mods were actually on Wednesday, but been too busy to post...Finally added my splitter which has been sitting in the garage for the last 2 months and added my W8 console... Next weeks are the Stasis street sport coils that I have on order and arrive on Tuesday!! Woohoo!
![]()
#303
color matched my engine covers and lowered my pss9's all the way in the front(approximately a 1/4" from previous setting)![]()
R thirty poo
#304
first oil change on the R today after buying it last week and driving it 2000 miles home
#305
Putting on the new evoms intake that came in on Friday.
Got it to replace the eroding ITG filter I've running the past few years.Peace
#306
Quote, originally posted by Det. John Kimble » first oil change on the R today after buying it last week and driving it 2000 miles home
C
Quote, originally posted by Det. John Kimble » first oil change on the R today after buying it last week and driving it 2000 miles home
Congrats!welcome to the club.I have just recently been enjoying driving mine again.....
And got the mod bug a little bit..
so did the complete LED interior from 42dd including license plate lights...
got a brand new windshield, bumper replaced (thanks to some road debris taking out the old one about 3 months ago)...new cupra lip....new engine shields...
bought me some new R carpeted mats (for dubs along the rockies..i usually just run monster mats..)
got me some nice Corbeau seat belt pads...add a nice touch...
replacing my triple led sidemarkers with dark smoked markers (coming in next week)....
and next up should be cams, reflash and vf mounts....
oh...also picked up some NICE OSIR design carbon fiber/aluminum strut caps...
![]()
#307
took it to a 140+ cars VW Golf meet in Taipei Taiwan![]()
![]()
![]()
and was the only MK4 R32
![]()
click link for some pics:
http://photo.pchome.com.tw/maczou/06/
and
http://www.wretch.cc/album/alb...age=2
PS. not my photo albums.
cheers,
frank
#308
Quote, originally posted by divotor » took it to a 140+ cars VW Golf meet in Taipei Taiwan ![]()
![]()
![]()
and was the only MK4 R32
![]()
click link for some pics:
http://photo.pchome.com.tw/maczou/06/
and
http://www.wretch.cc/album/alb...age=2nice gathering!
#310
installed my ecs adj control arms / 15mm spacers / rolled my fenders. loving my car like the first day i got it![]()
#311
Euro headlight switch, body color turn signal indicators and side markers and changed my spark plugs.![]()
#312
brought to firestone to get an alognment and later il be putting on my ecs 15mm rear spacers if the longer nuts come today.
R thirty poo
#314
20mm rear ecs spacers, 5mm front h&r, ecs bolts and a nice shiny 4motion badge. pics when my camera charges a little more..
Modified by AaronD at 9:23 AM 8-6-2008
#315
I did THIS today ...![]()
** SCREW that rubber band trick! Kept slipping off.
I did THIS instead ..... notch a toothpick - insert thread in notch - feed toothpick thru mounting holes - tie gasket to unit - install unit.![]()
Modified by MyGLXtacy at 5:47 PM 8-10-2008